- Full metal and real wood construction
- WWII Lee Enfield No.4 MK.I* Rifle
- Supplied in a hard storage case
Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII.
Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Rifle No.4 MK.I* was the "last ditch" simplified variant of the Rifle No.4 MK.I, brought into being after the British Expeditionary Force lost a huge amount of ordinance in their evacuation of Dunkirk, much of which was No.4 MK.I rifles. The MK.I* was produced in the US by Savage Arms and in Canada by Inglis and was supplied across the commonwealth under the "Lend Lease" program. Design changes to the * variant include a simplified rear sight, a different style of cocking piece, and a reduction in finish quality, both to the wood stocks and the milled steel receivers.
The Ares Rifle No.4 MK.I* has all of the MK.I* details, with the exception of the wood and metal finish, which is absolutely Lee Enfield worthy with its elegant wood grain pattern and consistent varnished finish across the piece. Unlike the real MK.I*, the Ares version has flawless machining throughout, benefitting from a lack of mid-war production pressures and the high standards in external finish Ares historical rifles are known for.
Starting at the tip of the barrel we can find a real world accurate Lee Enfield No.4 muzzle which includes mock mounting lugs for the Lee Enfield No.4 MK.I bayonet, with the front sight and its protective wings just behind. The protective wings have circular cutouts on either side to allow more light to hit the front post to make it easier and faster to acquire.
The front sight is a flat blade which is set into a dovetail and can be adjusted left or right using the screw at the front of the sight. With the screw loosened you can slide the sight back and forth in its dovetail to the desired position to adjust for windage, and tighten the screw back up again. The protective wings on either side include cross-hatching on their rear-facing surface which is intended to minimise glare and give you a perfect view down your sights without the possibility of mixing up the sight blade and wings.
Following the front sight, we come to the first barrel band, which is constructed from stainless steel with a flawless gun metal finish applied. This barrel band is hinged and includes brass mock rivets and steel pins to keep everything firmly in place. The front barrel band also serves to hold the real wood upper handguard/heatshield on and it does a great job, as there is absolutely no play in these parts whatsoever.
Moving rearwards from the front we come to the handguard and forestock of the No.4 MK.I* which is the perfect shape and design to match the real thing. The barrel bands are all in the right places, and the middle band includes a steel sling swivel which can be used with the rear sling swivel on the bottom of the stock to mount a traditional Lee Enfield infantry-style sling.
As we reach the receiver we can see the authentic high-walled No.4 MK.I* receiver design, complete with a stripper clip guide, and rear iron sight. The rear sight is the correct simplified MK.I* sight, which provides two apertures to aim with, one finer aperture for precise shots and a wider one for low light and close quarters. Though it may not be as high tech as the original No.4 MK.I's micrometer adjustable rear sight, the MK.I* sight is easy to aim with and simple to use, much like the ghost ring aperture sights on an M16. These sights were well liked at the time the MK.I* was issued, and proved very effective at short to medium range, allowing for rapid snap shooting and outdoing the KAR98K sights by a country mile!
There is also an Ares logo stamped into the trunnion at the front of the receiver. This logo may not be a BSA logo but the attention Ares has paid to the looks of the stamping shows its attention to detail. This marking looks like a real stamping from the 1940s, not ultra sharp CNC machining from 2022, keeping the rifle looking faithful without any tell-tale signs of it being a replica. There are additional markings on the left side receiver wall, reading “No.4 MK1* - LONG BRANCH - 1942”, adding to the authenticity without stepping on any toes IP-wise.
The bolt pull of the Ares Rifle No.4 MK.I* is exactly what an authentic replica Lee Enfield should have. The Lee Enfield rifle series, going all the way back to the original Rifle No.1 MK.III was well known for its short and fast bolt throw, allowing British Tommy’s to carry out what is known as a “mad minute”. The mad minute basically involves several soldiers firing as quickly as possible, synchronising their firing and reloading cycle to suppress the enemy in the same way a machine gun team would.
The Ares No.4 is very capable of this and requires only a slight turn of the bolt and a short pull backwards to cock the rifle ready for the next shot, making it awesome for the authentic Lee Enfield experience, but also an asset on the field for when you need a fast follow-up shot. For those who have fired a real Lee Enfield; you will be impressed by the feel of the bolt of the Ares No.4 MK.I* as it almost has the feel of a “cock on close” bolt action, requiring a slight bit of force to close the bolt while being fast to open and operate. This is the aspect of the Enfield action that takes the credit for the “mad minute” and is what separates it from slow bolt actions like the KAR98K and M1903A3 Springfield rifle.
The magazine release can be found inside the trigger guard and requires an upwards press on its textured surface to release the mag. This is regarded as a dangerous feature these days, but once upon a time soldiers could be trusted not to pull the trigger when they mean to release the magazine! The real Lee Enfield rifles were only issued with a single magazine and were generally reloaded using stripper clips or individual cartridges, making this feature perfectly adequate for its use with the benefit that the magazine catch cannot be snagged and inadvertently drop the magazine.
The safety catch of the Ares No.4 MK.I* is located on the left side of the receiver, just ahead of the rear stock socket. The catch requires a rearward pull to lock the trigger, and forward push to release it. The safety can only be activated when the rifle is cocked, and forcing it could damage the rifle so we advise being cautious, and not forcing the safety if it appears to not want to move into position. The safety is fast to use and can easily be actuated from a firing grip with the thumb, and is still effective in wet weather thanks to its textured surface.
Following the receiver and controls, we come to the rear stock socket, and the stock itself. The socket is appropriately marked with the serial number of the rifle on the left side, just like the real thing. The socket also features an Ares stamp above which looks perfectly in keeping with the other markings on the rifle, and those on the real Lee Enfield No.4 MK.I*.
The stock sports the appropriate Enfield shape which dates back to the Lee Metford Rifle which pre-dates the S.M.L.E of WWI. The grip section is at a steeper angle than modern sniper rifles, but feels great in the hand and works perfectly with the short and fast Enfield bolt.
The butt plate of the Ares Rifle No.4 MK.I* is the correct design and colouration for the No.4 rifle and is constructed from steel to reduce the damage the rifle will take if dropped on its stock. The real No.4 MK.I* had an aluminium butt plate, so this is one more area the Ares rifle outdoes the original! The butt plate also includes a hinged compartment for a cleaning kit, but we think you could effectively conceal various snacks inside, or something more useful, like tools. At the toe of the stock, we can find our final sling point which matches the real Enfield flawlessly and allows this hefty and substantial feeling rifle to be carried more easily in-game.
This is the Airsoft rifle most of us feel like we have waited our whole lives for, and it was well worth the wait! The Ares Lee Enfield Rifle No.4 MK.I* is flawlessly built with impressive attention to detail, a large number heavy and robust steel parts and gorgeous wood furniture with a fantastic finish. Whether it is strictly to adorn the wall of your man cave, or you are taking it out to contend in the great British woodlands, the Ares Lee Enfield Rifle No.4 MK.I* will be right at home!
Features
- Full metal construction
- Real wood stock, handguard and heatshield
- Most metal parts are stainless steel
- Great for display, re-enactment or skirmishing!
- Authentic antique look - Metal finish is fantastic
- Short and fast bolt action - So it should be for a Lee Enfield!
- Compatible with Ares Lee Enfield Rifle No.4 Magazines (S&T No.1 MK.III mags do not fit!)
- Hefty, realistic weight and feel - Great for the realistic experience
- Beautiful wood finish - Better than most real mid-late war Enfields, we don't mind though!
- Sling points at the front and rear - Ready for a two-point sling
- A great fit for a WWII British/Commonwealth loadout
- Correct No.4 MK.I* battlesight - Simple dual aperture flip sight
- Includes detailed hard storage/display case - Faux wood style polymer with markings
- A must-have for any historical rifle collector
Package Includes
- Ares Lee Enfield Rifle No.4 MK.I* Bolt Action
- Ares Lee Enfield 35rnd Magazine
- Hard storage case
Special Instructions
Specification
General
|
Snipers Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Approx. 425fps ± 10%, using 0.20g BB
|
|
Yes
|
|
Yes
|
|
|
|
Experienced Player
|
Weight and Dimension
|
Approx. 3.9kg
|
---|---|
|
111cm
|
|
111cm
|
Construction
|
Black
|
---|---|
|
Real Wood
|
|
Real wood stock, handguard and heatshield. Alloy outer barrel and trim parts. Stainless steel receiver, barrel bands and butt plate. Steel screws, pins, muzzle, front sight and bolt handle.
|
|
Alloy
Real Wood
Steel
|
|
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
|
Spring
|
---|---|
|
None
|
|
Long Gun, Snipers Rifle, Lee Enfield Rifle No.4 MK.I*,
|
|
Long Gun Magazine, Snipers Rifle, Ares L42a1/Rifle No.4 MK1 magazine,
|
|
Safe
Bolt Action
|
|
Trigger Lock
|
|
Right Handed
|
|
Bolt Action
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Grub Key
|
|
In front of the mock bolt, accessible when the bolt is cocked and left open.
|
Furniture
|
|
---|---|
|
None
|
|
Fixed
|
|
1 Position
|
|
Iron Sights , Aperture Iron Sight,
|
|
Stock , Handguard , Loop ,
|
Barrel
Outer Barrel Length (in)
|
25.2''
|
---|---|
|
6.08mm
|
|
590mm
|
Magazine Specific
|
Low Capacity , Sniper Rifle,
|
---|---|
|
Approx. 35 Rounds
|
|
Speed Loader
|
|
Top
|
Product Testing Data
|
425 FPS +/- 10%
|
---|---|
|
0.2g ASG BLASTER
|
|
17/10/2022
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Weaker Than Ultra Gas
- Ideal Summer Gas
- 700ml Content
A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity.
Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.
- Check and dot pattern texture
- 150rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for an ultra-modern styled mid cap, this is the one you're after!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- 1kg bulk bag
- Choice of BB Weights
- High quality - Great value!
For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!
- Special Putty
- Oils & Degreasers
- Cleaning Tools Included
A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport.
- 4x Fixed Zoom
- 4x32 Rifle Scope
- Scope Rings Included
A Scope designed for Airsoft Weapons designed to allow the user to place accurate shots at range, and allows you to follow the trajectory of BBs as they are fired.
- 14mm CCW or 14mm CW threads
- "Brrrrt" markings - 40mm Diameter version
- Foam filled for slight sound dampening
If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.
This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!
- High Power Gas
- Metal Fill Nozzle
- Contains UPL+ Lubricant
Abbey Predator Ultra GAS is the perfect propellant for any gas weapon from pistols to high tech sniper rifles. It contains UPL+ lubricant which is designed to stay permanently mixed with the propellant.
- White In Colour
- Heavyweight BBs
- Improve Range & Accuracy
The BBs that Airsoft snipers have been waiting for: the ultimate heavyweight, precicsion made 0.43g Airsoft BBs, designed to offer users enhanced range and accuracy.
- 12g Capacity
- Single CO2 Bulb
- Steel Construction
A 12g CO2 Bulb Capsule Single, sold individually these 12g bulbs can be used for both Airsoft and Air rifles.
- Tolerance: 5.95mm +/- 0.01mm
- Biodegradable BBs
- 0.25g Weight - 2200 or 6000rnd options
If you are looking for biodegradable BBs for use in both CQB skirmishes and out in the glorious woods, NUPROL have just the thing! The RZR 0.25g Precision BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are constructed from a biodegradable polymer, meaning they will be allowed on even the strictest Airsoft sites and no need to worry about cleaning up after shooting!
- Low Powered Gas
- Silicone Lubricants
- For Polymer Pistols
A bottle of Low Powered Gas designed by NUPROL as part of their Green Gas Range, designed to be used with Plastic Bodied Weapons and Small Submachine Guns which require lower powers to operate.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- 30ml Content
- Great Lubricant
- Easy Drip Nozzle
Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.
- 1kg Bag of BBs
- Approx. 3550 BBs
- Standard White 0.28g
Developed by Evolution Airsoft these 1Kg Bag of 0.28G BBs are great standard BBs for regular Skirmishers and Airsoft players who are looking to get great performance from their Airsoft gun. 0.28g BB are commonly used as a Regular to Advanced Player weight of BB, and are great for outdoor gameplay, allowing them to punch through bushes, grass, and more stable in wind. These BBs are perfect for use in Airsoft guns operating over 320fps, or for upgraded guns with an effective hop-up unit.
The BBs come in a 1kg Bag, with the bag containing approx. 3550 BBs, and is resealable to ensure that your BBs stay as fresh as possible, and prevents them from spilling once the bag has been opened.
- Green Gas
- 520ml Contents
- 90% Propane / 10% Butane
Green Gas designed for use on gas powered Airsoft pistols, Rifles and Shotguns. The gas comes in a lightweight aluminium can and has a heavy duty metal nozzle meaning it won't snap.
- White in Colour
- 1000 BBs Per Pot
- Improve Accuracy & Range
The BBs everyone has been waiting for! A White Airsoft Sniper 6mm BB pellet that also works!
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!
- 6.03mm Tightbore inner barrel
- High density polymer construction
- Spenca's featherweight AR-9 offering
If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.
The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.
Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!
- Integrated optical sight
- Front 20mm RIS rail
- Bullpup configuration
Bullpup rifles, you either love 'em or you hate 'em. But assuming you've found your way to this page, we're guessing you're on team rear mag. This variant features a shorter barrel so the compact nature of the AUG is augmented further, giving you a long hidden inner barrel with a vastly reduced footprint when held against your person.
With an integrated scope and front para 20mm rail with pistol grip included, this variety of AUG is great for both CQB and longer range outdoor skirmishing alike, giving you the best of both worlds. With a sturdy and compact design, bullpup fans, you may have just found your new favourite primary.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Tactical Appearance
- Alloy M-LOK Handguard
- Hi-tech Internal Enhancements
The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- Thread adaptor and rail
- Extended base plate
- Light enhancing sights
Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.
The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.
- Square Ironsights
- CO2 Compatible
- Textured Grip
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.
This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!
- Revolver Grenade Launcher
- Can fire 6x MOSCARTs in rapid succession
- The ultimate Airsoft firepower!
If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.
The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!
The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.
Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!
- Full metal construction
- 6.01mm Steel tightbore inner barrel
- An AK dressed for 21st century combat
If you are a fan of the AK platform but want something that can be equipped like a modern AR, the ARCTURUS AK74 TWS M-LOK Carbine should satisfy your needs! This AK is built like a tank, much like ARCTURUS's other AK offerings, but is equipped with a 20mm railed receiver cover and M-LOK/Picatinny hybrid handguard to allow a wide range of modern western accessories to be mounted seamlessly, with no need for adapters or improvised solutions.
On the inside, we are equally well equipped with the AK74 TWS. This AEG has a 6.01mm steel tightbore inner barrel, a modern rotary style AK HOP-up unit and some well chosen internal upgrades focussing on reducing friction and improving the efficiency of the system, and the result is impressive performance with little to go wrong. Those after an AK that can do everything an AR can, this one is for you!