Airsoft Pistol Magazines

If you need to carry some extra rounds for yourSRC SR-SP GBB Pistol, you need a couple of these! Like most Airsoft pistol magazines, it features a double-stacked design, capable of holding up to 25 rounds. Ammunition can be loaded from the front either by hand or using an Airsoft speed loader, once the BB guide has been pulled to the bottom of the magazine.

This magazine can be filled with gas via the valve on the bottom through the base plate, which is removable, allowing easier access for any maintenance and can be replaced should the magazine become damaged. On closer inspection of the magazine, subtle Raven logos have been engraved into the bottom of the base plate, a tasteful finishing touch.

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

A spare or replacement Magazine for Army Armament branded 1911 series Gas Blowback pistols, holding a total of 25rnds and being compatible with R31 and R29 models. It has a flat baseplate so that it fits flush with the bottom of the Pistol Grip, and is reportedly compatible with Army, APS, KJ Works and Tokyo Marui models.

If you are running the gorgeous Army Armament Sand Viper you will need some equally gorgeous magazines to feed it! The Army Armament 28rnd Magazine for TTI Sand Viper is intended for the Sand Viper, of course, and comes with a CNC machined Aluminium baseplate finished in bronze sporting the Taran Tactical Innovations logo. Being a Hi-capa-based design, this magazine should also fit and feed in most TM-compatible Hi-capa pistols.

The magazine follows the standard GBB pistol mag layout, with the gas fill valve located on the baseplate, requiring both the magazine and your gas can to be inverted to fill. The mag can be loaded through the feed lips or through the feed channel on the front when the follower is pulled down, either by hand or using an Airsoft speed loader. If you want to load up on mags for your Sand Viper but you need the matching baseplates, here you go!

If you're after spare AEP magazines you are in luck! The CYMA 30rnd Magazine is compatible with the CM.030, CM.122, CM.123, CM.126, CM.127 and CM.132 AEP, and should also fit the ASG XP17 Challenger AEP. This magazine is constructed with an alloy shell, polymer follower and steel feed spring, and can be loaded using an Airsoft speed loader through the feed lips at the top of the magazine body. This magazine holds 30 BBs and is a very compact design so it is easy to carry loads!

Want to run your trusted side arm as a primary? Now is your chance! A 30 round magazine for the 1911 platform designed for the Army Armament 1911 / R32.

This is an Extended Magazine for a range of CYMA AEP Airsoft Electric Pistols, which not only has an awesome external design to look like the real thing when inserted, but carries loads more BBs and allows you to make the most of the 'Full Auto' function on your AEP.

An Alloy constructed 23rnd magazine for the Vorsk series of Hi-Capa Gas Blowback Pistols.

A replacement, spare or 'special treat' magazine for your gas-powered EU Series pistol, which holds a frightening 50rnds to keep your sidearm blazing throughout the day.

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

A replacement/spare gas magazine for the ASG / TM MK23 NBB pistols, which is manufactured to an OEM standard.

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

If you're searching for more mags for your CM.136 EBB, here they are! CYMA's 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach is loaded through the feed/fill window on the top using a speed loader or by hand, designed specifically for the CM.136 Grach EBB with an 11.1V LiPo battery built-in.

The integral battery is charged using the cable included with your CM.136 via the charging port on the baseplate. As with all LiPo batteries, this battery MUST be charged using a LiPo balance charger through the balance port. Standard LiPo safety applies, including not leaving your battery charging while unattended and always using a battery charging bag. Keep your super fun EBB Grach running for longer in-game with the CYMA 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach!

If you are after spare magazines for your brand new Evolution Airsoft E911, whether it is the discrete Defender model or the super tacticool Special Operations model, you are in luck! This magazine holds 25 rounds and can be loaded using a speed loader, either through the feed lips at the top of the mag or the fill port at the front, accessible when the follower is pulled down. This is a green gas magazine, and the fill valve can be found on the baseplate of the mag. This magazine is TM spec, though we have not had the opportunity to test it with a TM 1911 we can confirm that it works with the Army MEU, and potentially others!

The ideal magazine for those who want to spend less time reloading and more time shooting!

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

If you want to take pure advantage of the AAP-01's insane rate of fire or you operate with the philosophy that reloads are for losers, the Action Army 350rnd Drum Magazine for AAP-01 GBB Pistols is perfect for you! This green gas drum magazine operates via a "flash mag" type system, meaning instead of winding an awkward wheel to keep the mag feeding you simply need to pull the steel drawcord on the base 4-5 times and you're ready to rock. 

The Drum Magazine holds 350 BBs, more than 10 times the capacity of a standard AAP magazine and around 7 times the capacity of an extended AAP magazine; the perfect thing for AAP owners making full use of full auto and those who move so fast they ain't got time to reload! 

Finally! A 50rnd Extended Magazine for EU-Series gas pistols, which accepts a 12g CO2 Sparklet! This means that even on the coldest days, your 50rnd Magazine can be put through your pistol without issue. The strong performance of CO2 should ensure that you can blast through an entire magazine, and have a great time doing it.

A gas blowback Airsoft CO2 magazine developed by VORSK for their EU/G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 48 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK EU/G-Series pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

If you want to keep your Desert Eagle running when the cold sets in a CO2 mag is the only way to do it. The 27rnd CO2 Magazine for WE/Armourer Works Desert Eagle GBB Pistol is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE/Armourer Works Desert Eagle GBB pistol and will not work in the KWC full auto version.

The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. The mag takes 12g unthreaded CO2 capsules and a single capsule can be inserted from the left side of the magazine and tightened via the Allen screw on the baseplate. As always, this magazine will require lubrication to maintain its health in the long term, and we recommend applying some Silicone Dropper Oil to the top of each CO2 bulb before inserting it. Keep your mighty Desert Eagle in the fight all winter with this CO2 magazine!

If you need spare magazines for your Cybergun WE/Armourer Works Desert Eagle GBB you have found them! These mags are constructed from alloy with polymer feed lips, a steel feed spring and brass valves and are compatible with the Cybergun Desert Eagle but only the version manufactured by WE or Armourer Works.

Each mag is designed to mimic the real thing perfectly, complete with mock witness windows on the left side with numerical engravings indicating the capacity of the real Deagle. The gas fill valve is located on the baseplate and the mag is compatible with summer gas, green gas and red gas. Unlike other GBB magazines, this mag cannot be loaded through the feed channel as it is closed off like a GBBR mag and instead must be loaded through the feed lips at the top of the mag, so we recommend using a speed loader with a GBB adapter for ease of loading (like this).

Please note, this magazine is NOT compatible with Cybergun's KWC Desert Eagle CO2 FULL AUTO and will only work with Cybergun WE/Armorer Works Desert Eagles.

A CO2 powered magazine designed for use in the RAVEN EU Series 18 GBB pistol and WE Europe's G-Series of pistols, which performs better than traditional gas magazines in colder weather.

If you want a long-boi magazine for your B9 AEP but you hate battle rattle giving you away, this mag was made to meet your needs! The CYMA 80rnd Long Mid-cap Magazine For CM.132/126 B9 AEP follows the external format of the CYMA AEP High-caps but is a rattle-free spring loaded mid-cap which should keep those with a more sneaky playstyle at the top of their game.

The magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 80 6mm Airsoft BBs; a significant increase over the standard AEP magazine. Compatibility-wise, this magazine is suitable for the CYMA CM.126, CM.126S, CM.132 and CM.132S B9 style AEPs and is unlikely to work in other designs.

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 21 rounds. The magazine is a direct replacement of the magazine which comes with the pistol, and great for those who want the original magazines which go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

If you own the gorgeous new JDG Polymer 80 PFS9 from Double Eagle, or you have a TM based EU series GBB and you need better rapid-fire performance, this magazine is a great way to get there! The 30rnd JDG P80 PFS9 magazine is constructed from alloy with polymer feed lips and a steel feed spring and holds 30 BBs which can be loaded either using a speed loader or by hand through the feed lips or the feed port on the front which is accessible when the follower is pulled down. The advantage of using this magazine over a standard length EU series mag is its enlarged gas reservoir, meaning better cold weather performance, less FPS variance under rapid-fire and more shots per fill of gas.

The STTI 28rnd CO2 Magazine for MK23 NBB Gas Pistols is perfect for those winter months. CO2 is much more consistent than green gas in the cold weather, every sneaky sniper needs these mags for their trusted sidearm during those cold skirmishes. It is compatible with the STTI ST-23 non-blowback pistol but also fits in other brands of non-blowback MK23 pistols. It is constructed from a tough Alloy, looking identical to the standard MK23 magazines, and holds a total of 28 BBs.

The CO2 compartment is inside the shell and is accessible from the bottom. To open it, simply undo the bottom screw with an Allen key. With this done, you will see the CO2 capsule space inside, here you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten the Allen key screw back down and you're good to go!