Airsoft Stocks

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

If your AK buttstock is too slippery and is hard to shoulder when wearing a tactical vest this is what you need! The Element Rubber Butt Pad for AK47/74 is designed to slip over either AK fixed stocks or the AK74 side folding skeleton stock and provide enhanced grip for poor weather conditions and make the rifle easier to shoulder effectively with modern tactical gear. This butt pad is a copy of the real Izhmash AK butt pad which was issued to the Soviet and Russian Militaries, so would be a great choice for a Milsim build.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Skeleton Stock w/Folding Butt Plate is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium with weight reducing cuts throughout, and the folding/mounting mechanism is constructed from steel to provide the prerequisite strength. This stock is ideal for super compact setups with its folding butt plate, and its raised cheekpiece provides superb sight alignment. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing an ultra-compact solution when folded, with full functionality when deployed! Get this on your MPX, it deserves it!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

Looking to make your SMG-5 AEG even more compact? Perhaps you had an accident with your previous stock and need a replacement? Here it is, and at a price that makes sense even for a more affordable SMG-5.

If you're looking for a modern stock design with plenty of room for a massive battery, the PTS Syndicate EPS-2 M4/AR-15 Stock has your name on it! Made from ultra-strong DuPont Zytel high-density polymer with steel QD sling sockets on each side and a grippy rubber butt plate, the EPS-2 builds on the original EPS design with a more modern aesthetic and reduced overall length, keeping the rock-solid build quality which put PTS on the map.  

The adjustment lever is a low-profile split design with a fixed central ridge, reducing the chances of accidental activation to practically nil. The shape of the stock itself is designed to reduce snag potential, with smooth edges and practically nowhere for your sling to catch and slow you down. To access the internal battery compartment, press the two tabs at the toe of the stock in, then lift the butt plate free. 

Compatibility-wise, the EPS-2 should fit most Airsoft M4/AR-15 buffer tubes, both AEG and GBBR versions. If you're styling up your AR and want more battery space as a bonus, the PTS EPS-2 M4/AR-15 Stock belongs on your build!

If you're looking for a modern stock design with plenty of room for a massive battery, the PTS Syndicate EPS-2 M4/AR-15 Stock has your name on it! Made from ultra-strong DuPont Zytel high-density polymer with steel QD sling sockets on each side and a grippy rubber butt plate, the EPS-2 builds on the original EPS design with a more modern aesthetic and reduced overall length, keeping the rock-solid build quality which put PTS on the map.  

The adjustment lever is a low-profile split design with a fixed central ridge, reducing the chances of accidental activation to practically nil. The shape of the stock itself is designed to reduce snag potential, with smooth edges and practically nowhere for your sling to catch and slow you down. To access the internal battery compartment, press the two tabs at the toe of the stock in, then lift the butt plate free. 

Compatibility-wise, the EPS-2 should fit most Airsoft M4/AR-15 buffer tubes, both AEG and GBBR versions. If you're styling up your AR and want more battery space as a bonus, the PTS EPS-2 M4/AR-15 Stock belongs on your build!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Minimalist Folding Stock is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium to reduce weight when compared to 90% of other stock setups around, and the stock folding and mounting mechanism is constructed from steel for extra strength. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing a low profile stock option with QD sling sockets in either side and a textured rubber butt plate for added grip.

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

Infinitely functional and incredibly comfortable, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms offers modern looks, an ergonomic shape and a massive internal battery compartment. Although branded as 'Heavy Ops', this stock is anything but, being constructed from lightweight yet strong high-density polymer to keep your setup light, agile and well balanced.

The internal battery compartment can be accessed by pushing the two tabs at the toe of the stock through, after which the butt plate will pop off. Inside, you'll find a pair of generous 17 cm long battery compartments, ideal for crane/nunchuck configuration batteries.

Amongst its many ergonomic perks, the Heavy Ops Stock features rubberised cheek rests for comfort and a thick serrated butt plate made from rubber for perfect traction in any weather conditions. The adjustment lever is ambidextrous and concealed within the "A-frame" shape, preventing equipment snags and keeping you agile in the field. If you need a substantial battery compartment but seek modern aesthetics, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms covers both bases!

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place.

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!

The Specna Arms PDW Stock for M4/AR-15 Replicas allows you to stow your rifle in much smaller spaces and use it in a much more compressed shooting stance, perfect for CQB battles. It is primarily constructed from alloy with a polymer butt plate and steel stock bars for additional strength. The adjustment lever can be found on the bottom of the stock and allows the user to extend the stock to multiple positions, depending on their body type and the scenario.

This stock system is compatible with most M4/AR-15 AEG rifles and is identical to the ones found on the PDW series of Specna Arms platforms. The battery compartment is in the buffer tube, which is secured via a threaded cap to keep your battery secure and waterproof. The Specna Arms 7.4V 600mAh 20/40C Battery for PDW is recommended as it will fit. Other similarly sized batteries will also fit.

The Specna Arms PDW Stock for M4/AR-15 Replicas allows you to stow your rifle in much smaller spaces and use it in a much more compressed shooting stance, perfect for CQB battles. It is primarily constructed from alloy with a polymer butt plate and steel stock bars for additional strength. The adjustment lever can be found on the bottom of the stock and allows the user to extend the stock to multiple positions, depending on their body type and the scenario.

This stock system is compatible with most M4/AR-15 AEG rifles and is identical to the ones found on the PDW series of Specna Arms platforms. The battery compartment is in the buffer tube, which is secured via a threaded cap to keep your battery secure and waterproof. The Specna Arms 7.4V 600mAh 20/40C Battery for PDW is recommended as it will fit. Other similarly sized batteries will also fit.

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Visor/Respirator Stock is designed to mount to any 20mm Picatinny rail, primarily those found on MPX and MCX rifles, and other AEG/GBB primaries with 1913/20mm Picatinny stock mounting apparatus. Feel free to mount it to any rail on your AEG, but don't blame us for the funny looks!

The stock body is constructed from aluminium to keep the weight low, and the butt plate is rubber with linear texture to promote positive grip, with or without body armour. The folding/mounting mechanism is constructed from steel to provide the strength needed, and the QD sockets on either side of the stock are also steel, and fully functional. The Visor/Respirator stock is designed specifically to provide perfect sight alignment when wearing bulky face gear, allowing you to see down your optic without requiring a riser and increasing height over bore.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

If your STRIBOG™ is going stockless, here's what you need! The Delta Armory Polymer Folding Stock for Grand Power STRIBOG™ AEG is designed to replace the included 1913/20mm Picatinny interface, offering a simple, robust side folding stock with QD sling sockets built into each side, ready for QD sling swivels. 

This is the STRIBOG's simplest stock option, akin to older SMGs like the UMP, with its lightweight, skeletonised design and serrated butt plate. At the heel of the stock, we can also find a discrete Delta Armory logo engraved in, but realism fans need not worry; this marking is small enough that it won't mar the realistic looks of your STRIBOG™!