All Electric Parts

Springs are the perfect upgrade for an instant FPS boost! They fit in most standard AEGs and have a relatively simple installation process. Many rifles these days have some sort of quick-change spring system which makes your life even easier when upgrading your rifles.

The Bolster Armouries Premium AEG Spring is the best of the best when it comes to internal springs. These are the same springs used in our Bolster Armouries rifles, that's just how premium these springs are! If you want your rifle shooting like a Bolster Armouries ONYX, then the Bolster Armouries Premium AEG Spring is certainly a step in the right direction!

Springs are the perfect upgrade for an instant FPS boost! They fit in most standard AEGs and have a relatively simple installation process. Many rifles these days have some sort of quick-change spring system which makes your life even easier when upgrading your rifles.

The Bolster Armouries Premium AEG Spring is the best of the best when it comes to internal springs. These are the same springs used in our Bolster Armouries rifles, that's just how premium these springs are! If you want your rifle shooting like a Bolster Armouries ONYX, then the Bolster Armouries Premium AEG Spring is certainly a step in the right direction!

Springs are the perfect upgrade for an instant FPS boost! They fit in most standard AEGs and have a relatively simple installation process. Many rifles these days have some sort of quick-change spring system which makes your life even easier when upgrading your rifles.

The Bolster Armouries Premium AEG Spring is the best of the best when it comes to internal springs. These are the same springs used in our Bolster Armouries rifles, that's just how premium these springs are! If you want your rifle shooting like a Bolster Armouries ONYX, then the Bolster Armouries Premium AEG Spring is certainly a step in the right direction!

If you're the techy type and want to maximise your AEG's efficiency, the Bolster Armouries HOP-up to Barrel O-Ring Shim Set belongs in your toolbox! This set includes 10 o-rings designed to fit around the HOP-up unit and inner barrel, forcing it back to meet the gearbox as seamlessly as possible to promote maximum efficiency and reduce shot-to-shot FPS deviation.

This set is designed to replace the "one size fits all" HOP-up unit spring, providing a user-customisable solution to account for manufacturing tolerances. While this will take a bit of trial and error to get the perfect fit for your AEG it should prevent airseal qualities from reducing over time and avoid that annoying realisation that you forgot to reinstall the HOP-up spring after upgrading or maintenance!

The Bolster Armouries HOP-up to Barrel O-Ring Shim set should fit almost every AEG on the market and you probably won't need to use the full set, meaning you might even be able to replace two HOP-up springs with a single set.

If you're tuning up your TM NGRS, the FPS Softair Upgrade Spring for Tokyo Marui NGRS will be useful! Available in M95, M100 or M105 strengths, this spring will work in any Tokyo Marui NGRS gearbox, including M4 variants, the 416, SCAR-L and H.

The FPS Softair Upgrade Spring is made from carbon steel wire (EN10270 / 2) with silicone and chrome additives and is heat-treated to extend its lifespan. We recommend pairing this upgrade spring with upgraded bushings, an upgraded spring guide and a ball bearing piston head to maximise reliability. If you're going for higher FPS in your NGRS build, the FPS Softair Upgrade Spring for Tokyo Marui NGRS is what you need!

If you have big plans for your TM NGRS platform, the FPS Softair CNC Steel 5.9 mm Bushings for TM NGRS belong inside! These robust steel bushings are specifically designed for Tokyo Marui NGRS (Next Generation Recoil Shock) gearboxes, providing the strength necessary to cope with high-power springs, high-speed motors, and other upgraded internal parts.

Compatibility-wise, these bushings will work in all TM's current NGRS lineup other than the MK46 LMG, which uses proprietary bushings. Whether your NGRS is being upgraded for DMR work, high rate of fire, or you just want it to last forever, FPS Softair's CNC Steel 5.9 mm Bushings for TM NGRS are what you need!

If you're upgrading your AK-47/74 AEG, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for AK-47/74 AEG is an essential part! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a high-performance AK AEG build, you won't find any better than the FPS Softair ERGAL Air Nozzle with Inner O-Ring!

If you need better accuracy from your LCT AK AEG, this should do it! The LCT Rotary Hop Unit for AK AEG is designed for LCT AK replicas (LCK range) but may fit other brands, though we cannot guarantee off-brand compatibility currently.

This new HOP-up design brings the rotary adjuster style to the AK platform, offering reduced side-to-side shot deviation, improved setting retention, and finer adjustment increments. Like the original slider unit, this rotary accepts standard TM AEG spec HOP-up buckings, nubs and inner barrels.

Designed to improve conductivity for a boost in rate of fire and trigger response, FPS Softair Low Resistance Wiring is ideal for custom builders seeking the slickest, most efficient setup possible. This wiring is supplied in a 2-meter length and is 1.7mm in diameter, making it ideal for AEG wiring, even in setups with relatively small wiring routes. If you're the techy type, FPS Softair Low Resistance Wiring should be in your parts stash!

This is the smallest Airsoft MOSFET on the market! It grants you a better rate of fire and trigger response, as well as protecting the mechanical trigger contacts in your AEG, as electrical currents bypass them and go straight to the motor. The MOSFET is so compact that it can be fitted to pretty much any Airsoft AEG.

It attaches to the wiring of your gun and will require some expert knowledge and skills to fit. Make sure you know what you're doing before installation! Also included in the package is a heat shrink, so you can keep this MOSFET safe after you have installed it.

If you're the techy type seeking high-quality MOSFET wiring, FPS Softair has your back with the High Conductivity MOSFET Signal Cable! Made with 19 pure copper capillaries coated in chrome to enhance conductivity, this signal wire is specifically designed to provide maximum efficiency while avoiding being too thick and impinging on gearbox internals. We all know the pain of discovering your pinion gear has shredded your wiring. Thankfully, this FPS Signal Wire sidesteps this issue entirely!

The capillaries are protected with an FEP (Fluorinated Ethylene Propylene) coating, keeping the wire flexible to be routed through tight spaces, ideal for whatever custom setup you have in mind. If you're an ambitious tech with some wild custom build plans, FPS Softair High Conductivity MOSFET Signal Cable will definitely come in handy!

If you're building out your MP5/SMG-5 AEG for high performance, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for MP5/SMG-5 AEG will ensure it's reliable and accurate! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a beastly MP5/SMG-5 AEG build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring is the way to go!

If you're upgrading your Cybergun/VFC SCAR-H, the ERGAL Air Nozzle with Inner O-Ring for VFC SCAR-H AEG from FPS Softair is essential for reliability and accuracy! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last. Compatibility-wise, this nozzle is designed specifically for the VFC-manufactured SCAR-H (sometimes branded Cybergun) and may also fit D-Boys SCAR-H AEGs, but won't work with other SCAR-H replicas.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a top-of-the-range nozzle for your VFC SCAR-H custom build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for VFC SCAR-H AEG is ideal!

Produced to an incredibly high quality with the best mil-spec steel rated SiCr. Every spring no matter the rating has gone through a full quality control test by ASG for your peace of mind that you are fitting a reliable spring.

A soft Hop Rubber for Marui compatible AEGs offering an air-tight design, which comes supplied with a nub and is a purple colour.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If your M4 needs a revamp, a new gearbox is the easiest way to do it. The Delta Armory Complete Version 2 Gearbox for M4/AR-15 AEG is compatible with almost every M4/AR-15 AEG on the market and is well-equipped with reinforced parts straight out of the gate.

This is the same gearbox used in the Delta Armory CHARLIE™ line AEGs, boasting a quick change spring guide, 18:1 steel gears running on 8mm bushings, an SHS piston with a full steel tooth rack, an SHS reinforced tappet plate and a reinforced gearbox shell with radiused cylinder window corners.

The pre-installed spring will provide around 380 FPS when installed, so if you plan to use this gearbox for anything other than a semi-auto-locked DMR build you will need an M100, M105 or weaker spring to keep it within site limits. Thankfully, the quick change spring system makes spring swaps a breeze! Whether you are breathing new life into an old M4 AEG or you are building an AEG from scratch, this complete gearbox will save you loads of time and messing around!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you are looking for a replacement piston on the cheap with no performance compromises, CYMA to the rescue! The CYMA Steel Tooth Piston Set w/Piston Head includes the piston itself, a piston head and a piston head O-ring. The piston has a full 15-tooth rack of steel teeth, improving strength while keeping overall weight manageable, making it great for high performance builds. The set is designed for version 2 and version 3 gearboxes and will be provided in a random colour; either blue or green.

If you want to unlock more functionality from your Gate ASTER or TITAN MOSFET, the USB Link from Gate is exactly what you're after! This dongle attaches to your AEGs Deans battery connector and allows you to connect it via micro-USB or USB Type C to your Android device, Windows PC or Mac and control diagnostics, trigger sensitivity, burst modes, rate of fire adjustment and all the other fantastic features built into the ASTER and TITAN ETUs. Unlock the full potential of your Gate TITAN or ASTER and give yourself the edge in battle!

If you're building a DMR or accurised AEG, the Delta Armory BERSERKER R-Hop Bucking Bundle for AEG is what you need to achieve maximum range. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes.

The inner patch of the BERSERKER bucking is shaped to fill the HOP-up window on your barrel, just like home-brewed R-HOP setups of old. The advantage of using a BERSERKER set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you use heavy BBs and need a range increase, this set will do exactly that!

If you have had a gearbox failure and you don't fancy opening it up, the CYMA Complete Version 2 Gearbox w/High Torque Motor & ETU is a pre-upgraded and pre-wired replacement which can be installed with minimal effort and no need to solder or open the gearbox shell. As always, we recommend you have some technical experience before installing a new gearbox, but when it comes to Airsoft upgrades this is about as easy as they get.

This gearbox set is designed for M4/AR-15 AEGs and has the correct nozzle length and selector plate for the task and is also pre-wired to a Deans connector so you can benefit from a lower resistance connector for increased electrical efficiency. Also included with the set is a CYMA high torque Neodymium magnet motor, providing a very snappy trigger response and the power to handle stronger springs than a standard motor.

The icing on the cake is the pre-installed MOSFET/ETU which prevents gearbox lock-up on semi-auto, provides further improvements to the trigger response and a boost to the rate of fire. If your M4 gearbox has issues or you want to freshen up an old M4 with a brand new and pre-upgraded gearbox this set would be a fantastic choice, avoiding the messing around and getting you back to shooting with minimal effort!

If you are building yourself a tech-filled, Gate ASTER V2 equipped M4 AEG then an interesting trigger is a great way to add some discrete external flair to your custom build to give onlookers a slight hint at what's inside. The Quantum Trigger from Gate is interesting in many more ways than one!

The Quantum trigger is available in 4 different shapes, all of which are CNC machined from aluminium, giving them a flawless appearance and a strong, flex-free structure. The colour options are almost endless, giving you the choice of some eye-catching metallics or dull and discrete tactical colours to suit any build, from DMR to speedsoft BB hose. The Quantum trigger becomes all the more impressive in its functional qualities; pairing it with the Gate ASTER V2 allows the trigger sensitivity to be adjusted to 470 different settings with over 60 settings just for the first millimetre of movement. Our jaw is still hanging open!

If you are building yourself a tech-filled, Gate ASTER V2 equipped M4 AEG then an interesting trigger is a great way to add some discrete external flair to your custom build to give onlookers a slight hint at what's inside. The Quantum Trigger from Gate is interesting in many more ways than one!

The Quantum trigger is available in 4 different shapes, all of which are CNC machined from aluminium, giving them a flawless appearance and a strong, flex-free structure. The colour options are almost endless, giving you the choice of some eye-catching metallics or dull and discrete tactical colours to suit any build, from DMR to speedsoft BB hose. The Quantum trigger becomes all the more impressive in its functional qualities; pairing it with the Gate ASTER V2 allows the trigger sensitivity to be adjusted to 470 different settings with over 60 settings just for the first millimetre of movement. Our jaw is still hanging open!

If you are building yourself a tech-filled, Gate ASTER V2 equipped M4 AEG then an interesting trigger is a great way to add some discrete external flair to your custom build to give onlookers a slight hint at what's inside. The Quantum Trigger from Gate is interesting in many more ways than one!

The Quantum trigger is available in 4 different shapes, all of which are CNC machined from aluminium, giving them a flawless appearance and a strong, flex-free structure. The colour options are almost endless, giving you the choice of some eye-catching metallics or dull and discrete tactical colours to suit any build, from DMR to speedsoft BB hose. The Quantum trigger becomes all the more impressive in its functional qualities; pairing it with the Gate ASTER V2 allows the trigger sensitivity to be adjusted to 470 different settings with over 60 settings just for the first millimetre of movement. Our jaw is still hanging open!

If you are building yourself a tech-filled, Gate ASTER V2 equipped M4 AEG then an interesting trigger is a great way to add some discrete external flair to your custom build to give onlookers a slight hint at what's inside. The Quantum Trigger from Gate is interesting in many more ways than one!

The Quantum trigger is available in 4 different shapes, all of which are CNC machined from aluminium, giving them a flawless appearance and a strong, flex-free structure. The colour options are almost endless, giving you the choice of some eye-catching metallics or dull and discrete tactical colours to suit any build, from DMR to speedsoft BB hose. The Quantum trigger becomes all the more impressive in its functional qualities; pairing it with the Gate ASTER V2 allows the trigger sensitivity to be adjusted to 470 different settings with over 60 settings just for the first millimetre of movement. Our jaw is still hanging open!

If you are building yourself a tech-filled, Gate ASTER V2 equipped M4 AEG then an interesting trigger is a great way to add some discrete external flair to your custom build to give onlookers a slight hint at what's inside. The Quantum Trigger from Gate is interesting in many more ways than one!

The Quantum trigger is available in 4 different shapes, all of which are CNC machined from aluminium, giving them a flawless appearance and a strong, flex-free structure. The colour options are almost endless, giving you the choice of some eye-catching metallics or dull and discrete tactical colours to suit any build, from DMR to speedsoft BB hose. The Quantum trigger becomes all the more impressive in its functional qualities; pairing it with the Gate ASTER V2 allows the trigger sensitivity to be adjusted to 470 different settings with over 60 settings just for the first millimetre of movement. Our jaw is still hanging open!