Airsoft Submachine Gun Magazines

This polymer P90 magazine is compatible with any TM-based P90 AEG, including brands like CYMA and Novritsch. It has a translucent brown design with mock bullets visible through it, giving your SMG an extra sense of realism as you charge through the Airsoft site.

The sturdy steel feed spring makes this a mighty fine magazine that will last you a long time. This magazine can hold approximately 70 BBs, not a large amount for full auto spraying and praying, but more than enough for a game of CQB, so long as you aren't too trigger happy...

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 60rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 60bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 105rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 105bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft  Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds. 

Looking for spare magazines for the VORSK VMP-1 or VMP-2? You have found them! The VORSK 45rnd Magazine for VMP GBB Series is constructed from alloy with a steel feed spring and brass valves, holding 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 and VMP-2 but these are available separately. 

Ideal for VMP-1 or VMP-2 users who need maximum capacity, this magazine is also compatible with ASG MP9 and KWA TP9 replicas. If you're gearing up to run the VMP-1 or any VMP-2 variant, these magazines are essential!

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 120rnd Mid-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 120 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing perfectly.

This magazine is a mid-cap, meaning it holds a respectable 120 rounds and is ideal for those who hate the "battle rattle" of high-caps but want a higher capacity. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

This high capacity magazine is designed for SMG-5 AEGs and holds a whopping 570rnds, much more than any other SMG-5 magazines. It is filled from the top of either magazine by pulling back the mock bullets or opening the fill window, and wound from the bottom clockwork wheel to feed BBs.

A 40 Round Green Gas Magazine for the UMAREX Airsoft Gas Blowback MP7A1.

If you own an AR-9, whether it is G&G's ARP9, PCC9 or one of Classic Army's X9 series, this will be of interest! Introducing the EMP-AR9 magazine from PTS, the number one name in Airsoft aftermarket enhanced magazines. The EPM-AR9 sports high strength Dupont Zytel polymer construction and a strong feed spring, guaranteeing that it will keep up with even the highest rate of fire builds! The magazine also features a bright orange follower so you can clearly see when the magazine is empty, and a witness window on either side to indicate when the magazine is at full capacity.

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

If you're running your VMP-1 SMG as a backup or cutting about with the beastly VMP-2D or MD, the VORSK 20rnd Short Gas Magazine for VMP GBB Series is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol or need compact mags to suit your VMP-2D or VMP-2MD DMR, these are what you need!

A multipack of magazine for the ASG Scorpion Evo. Built from tough Polymer these magazines are mid-capacity, meaning BBs can be loaded from the top using a speed loader and then require no winding. 

A variable capacity magazine for the Arcturus PP-19-01, capable of holding your choice of 30 and 95 rounds. The mag is filled using a speed loader at the fill port at the top and if you want to adjust between capacities this is accomplished by pressing the lock button at the bottom and sliding the bottom plate off. Then after removing the interior from the outer casing there is a switch on the side and after pushing inwards and moving either left or right that will alternate between 30 and 95rnd capacity. This is the perfect purchase for anyone who owns an Arcturus brand PP-19 and wants a mag that can vary between playstyles depending on the skirmish at hand.

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines.

If you have dreams of building an old school SMG-5 but you can't find the right high-cap mags, get them here while they last! The CYMA 200rnd Old School Straight High-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are high-caps for AEGs, meaning extra capacity, less time spent reloading and more opportunities to get kills before refilling. These mags should be compatible with practically any SMG-5 AEG platform out there and also the CM.106, CYMA's AR-9 platform. The mags can be loaded through the fill window at the top of the magazine body by opening the window and pouring BBs in straight from the bottle. With your BBs loaded, all you need to do is to wind the winding wheel on the bottom until it becomes firm, then get shooting!

Whether you are going old school with your SMG-5 build or not, straight mags give this iconic SMG a whole new look and can be a great way to make your SMG-5 platform AEG stand out!

If you are equipped with the WELL PRO WE06 PPK-20 Compact, whether it is the Standard or Advanced version, you will need a few of these to keep it well-fed! The WELL PRO 30/80rnd Variable Capacity Magazine For WE06 is constructed with a high-density polymer shell and steel baseplate and is compatible with both variants of the WE06, but is not compatible with ARCTURUS PP-19 or PPK-20 variants. 

This is an adjustable-capacity magazine which allows you to choose between 30rnd and 80rnd capacity by removing the internals from the shell and flicking the switch on the right side. This can be achieved by pushing the detent on the bottom of the mag in and sliding the baseplate off, after which the internals can be removed through the bottom. 

Otherwise, this mag works just like a normal midcap; filled with a speed loader through the fill/feed port at the top, with no battle rattle giving you away thanks to its spring-loaded internals. Whether it is the impressive Standard version or the insane Advanced version, you'll need quite a few of these to do this fantastic platform justice!

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

Finding your P90 is running out of ammo before you're done shooting? Maybe you think your P90 just isn't quite ugly enough? Just bought a P90, have no mags but a pile of old M4 highcaps? This magazine solution from CYMA will make you all happy. Huge Capacity to help you dominate the field, borrow your boring AR user mates magazines and hose the enemy down with a support weapon that fits in your pocket, the CYMA Mag adaptor Box mag is doing double duty!

If you have an SMG-5 and have caught straight mag fever no need to fret, we have the cure! The CYMA 120rnd Straight Mid-Cap Magazine For SMG-5/CM.106 AEG will give your SMG-5 AEG a whole new look similar to the legendary MP5-10, the 10mm version of the iconic SMG we all know and love.

These magazines are constructed with a steel shell, polymer internals and a steel feed spring and can be loaded with a speedloader or loading rod through the fill/feed port on the top of the magazine body. Compatibility-wise, these mags should work in the vast majority of SMG-5 AEGs out there, the CYMA CM.106 AR-9 AEG and most SMG-5/MP5 HPA magazine adapters for pistols. If you need a new look and new mags for your SMG-5 you can now hit two targets with a single BB!

A Polymer magazine for the ARP9 Airsoft Electric Gun, which holds a total of 60rnds and feeds BBs into the gun via a spring, meaning they feed completely until empty. Not only this, but they have actual dummy rounds (not just stickers) inside to look just like the real deal.

A 145rnd clockwork wound high capacity magazine for the Well R-4 series of SMG-7 styled Airsoft AEP.

Whether you are going a Vietnam war loadout, or you just like the compact form and unmistakable design of the legendary MAC-10, you will need some spare mags to run it in true SMG style! The JG 450rnd High-Cap Magazine is designed for the JG0452 MAC-10 AEP, but should also fit and feed in the TM MAC-10 AEP. This magazine is a wheel wound high-cap constructed with a steel shell and polymer internals. The fill window can be found on the top of the magazine, and can be opened by hand and the BBs poured straight in. The winding wheel is located on the bottom of the magazine and is a slightly wider design than the norm, meaning more comfort if you have to wind in a hurry!

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.

A 120 Round capacity Mid Cap Magazine for the UMAREX H&K MP7 AEG Airsoft Electric Gun.

A 6mm BB Airsoft 450 round high capacity magazine, designed to be used with Double Eagles M89A series of Airsoft Electric Guns.

If you need mags to keep your Grease Gun AEG in the game, these are the ones! The Snow Wolf 130rnd Mid-Cap Magazine for SW-06 M3A1 AEG is constructed with a steel shell, polymer internals and a steel feed spring, holding 130 BBs with no battle rattle or winding wheel to worry about! 

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Compatibility-wise, these mags are for the Snow Wolf M3 and M3A1 Grease Gun AEGs and are unlikely to work with other brands. Whether you run a WW2 loadout with a Grease Gun or a Desert Storm loadout with the same, these mags belong in your rig!