- CQB optimised M4
- Suppressor included
- 20mm Picatinny quad rail handguard
If you like a bit of CQB skirmishing you will know, size does matter. In this case, smaller is better! Introducing the M4A1 CQB RIS 5" by DBoys, straying from the usual DBoys script of realism above all to provide a more practical skirmish piece, whether it is a backup to a much bigger gun or as a primary for CQB.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
DBoys are well-known for providing excellent realism in AEGs at an enviable price point, but with this new M4A1 you get a slice of realism coated with skirmish practicality as well! The M4A1 RIS CQB is intended to bridge the gap between a GBB pistol and a full-sized AEG, providing a pocket-sized M4/AR15 platform that could be effectively used as a backup rifle for a sniper or support gunner, or as a primary for turning and burning at your local CQB site.
The M4A1 CQB RIS 5" is constructed primarily from polymer, with an alloy 20mm Picatinny quad railed handguard, suppressor and outer barrel. The metal bits being all up front balances this build really well with its metal internals, keeping the balance point between the magazine well and pistol grip, affording this AEG exceptional handling. At the tip of the alloy outer barrel we can find a threaded suppressor, which comes pre-installed to the barrels 14mm CCW male threads. This suppressor has CCW threads at one end, and CW threads at the other, so if you remove it make sure you reinstall it carefully, if it won't go on try it the other way around! If you ask us, this thing is begging for a tracer unit (especially if you're doing some CQB), and the 14mm CCW threaded barrel will allow the most common types to be added with no fuss.
The suppressor sits slightly recessed into the alloy 20mm Picatinny quad rail, providing an ultra-sleek "integrally suppressed" look, akin to the ever-popular AAC Honeybadger or MP5 SD. The quad rail provides attachment surfaces at the 3, 6, 9, and 12 o'clock positions, providing plenty of room for foregrips, tactical flashlights, and PEQ laser units should the mission require it. The handguard meets the receiver in a monolithic fashion, with no interruptions between each rail surface, allowing optical sights of practically any size to be mounted, including holographic sight and magnifier combinations. This rail surfaces comes with flip up iron sights pre-installed, which can be deployed by pressing the textured button on top of both the front and rear sights. The front sight includes protective wings to prevent the delicate sight blade from damage in the event of a drop, and the rear sight features a choice of two apertures that are adjustable for windage without the use of tools.
The receiver of the M4A1 RIS CQB is exactly what we would expect for an M4/AR15 AEG, and sports all the familiar and comfortable controls found on any M4 rifle. The fire selector can be found on the left side, and sits beneath the shooter's thumb for fast access, with a 90-degree throw between fire modes. The charging handle is present at the top rear of the upper receiver and provides access to the rotary HOP-up chamber when held to the rear. The HOP-up chamber can be found inside the ejection port on the right side, and allows adjustable backspin to be applied to your BB for extended range, consistency and resistance to wind. The dial within the ejection port can be rotated and set to provide a flat trajectory with your chosen BB weight and can be adjusted on the fly if needed. The rotary HOP design is widely regarded as one of the better unit designs on the market, and holds its setting very well, even under the vibration of firing. To the rear of the ejection port we can find a mock brass defector and mock forward assist button. These parts do nothing on an AEG M4, but they do certainly look the part, and without them, it just wouldn't be an M4! Over on the left side, we have another dummy control, the bolt release catch. A thoughtful inclusion for realism, the bolt catch is a separate piece made from metal and can be pressed for extra operator points after a flawless reload.
Moving down to the lower receiver, we can find the magazine catch, which protrudes on the right side beneath the ejection port and can easily be reached by the shooter's finger. This magazine catch is one of the best features of the M4/AR15 design, and allows a fast release and easy access whilst remaining protected from accidental bumps by the mag release "fence", moulded into the receiver itself. The pistol grip on this AEG is an "A2" finger ridged type, with checkering on the side and rear faces, providing ample grip whilst still remaining comfortable when handling without gloves.
At the rear end of the AEG we can find a standard M4/AR15 6 position buffer tube, constructed from polymer to keep the build manoeuvrable and well balanced. This buffer tube is compatible with any M4/AR15 AEG stock but comes with a Crane battery stock with QD sling sockets pre-installed. On a 6 position tube, you have 6 options as far as the stock length is concerned, allowing any body type to use this AEG comfortably. The stock also features conventional sling slots and can be set up with a two-point rifle sling if a 20mm sling point is installed on the handguard. The battery compartment for the M4A1 RIS CQB 5" can be found within the stock, and can be accessed by squeezing the two tabs at the toe of the stock together, after which the rubber butt plate can be removed. For this type of stock, we recommend a 7.4V 1300 mAh LiPo battery.
So, whether you are in the market for a lightweight backup for your heavyweight primary, or you just want something ideally suited to the "shoot and scoot" environment of the modern Airsoft CQB arena, the DBoys M4A1 RIS CQB 5" will serve you well!
Features
- Metal version 2 gearbox
- Rotary Adjustable HOP-up unit
- Alloy 20mm Picatinny quad rail
- Alloy suppressor pre-installed
- Polymer receiver, grip, buffer tube, stock
- Textured, finger ridged pistol grip
- Compatible with M4/AR15 AEG magazines
- Includes flip-up iron sights
- Extended charging handle latch
- 6 Position adjustable stock
- QD sling points and sling slots in the stock
Package Includes
- Dboys M4A1 CQB RIS 5" w/Suppressor
- 300 rnd High capacity magazine
- User manual
Specification
General
|
Assault Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Approx. 315fps ± 10%, using 0.20g BB
|
|
Yes
|
|
Yes
|
|
Magazine
|
|
Starter, Regular Player,
|
Weight and Dimension
|
Approx. 2.1kg
|
---|---|
|
61cm
|
|
69cm
|
Construction
|
Black
|
---|---|
|
Alloy RIS handguard, suppressor and outer barrel. Polymer receiver, pistol grip, buffer tube, stock and sights. Steel/Alloy trim parts
|
|
Polymer
Alloy
|
|
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
AR, M4 / AR-15 / M16, Assault Rifle,
|
|
STANAG, Long Gun Magazine, Assault Rifle, M4 / AR Platform,
|
|
Safe
Semi Automatic
Full Automatic
|
|
Trigger Lock
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Behind mock bolt carrier, accessible when the charging handle is held to the rear.
|
Furniture
|
|
---|---|
|
20mm RIS / RAS , 20mm Railed Receiver,
|
|
Sliding , M4 Crane Stock,
|
|
6 Position
|
|
Iron Sights , Aperture Iron Sight,
|
|
Stock , QD ,
|
Barrel
Outer Barrel Length (in)
|
4''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.08mm
|
|
210mm
|
Magazine Specific
|
High Capacity, Wheel Wound, AEG,
|
---|---|
|
Approx. 300 Rounds
|
|
Fill Window
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
V2 Gearbox
|
---|---|
|
Rear Wired
|
Motor
|
Standard
|
---|
Battery Specific
|
Mini Tamiya
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Crane
|
|
7.4v
|
Product Testing Data
|
315 FPS +/- 10%
|
---|---|
|
0.2g ASG BLASTER
|
|
24/01/2022
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |