Delta Armory R15 FREYA™ 7" M-LOK M4/AR-15 AEG

If a new CQB platform is on your shopping list, the Delta Armory R15 FREYA™ 7" M-LOK M4/AR-15 AEG should have your attention! Patterned after the real steel GrandPower Firearms R15 FREYA™ series, this short-barrelled M4/AR-15 AEG boasts a unique skeletonised receiver and handguard design, making it super rapid to point and ready for all the most modern accessories to be mounted. 

Inside, the new EAGLE ETU/MOSFET is the star of the show, offering unprecedented programming options using only the fire controls of the AEG itself. Options include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking. For an ETU which requires no app and no extra bits to unlock its most advanced functions, this is very impressive indeed!

Starting at the front, we can find a birdcage flash hider mounted to the tip of the outer barrel. The birdcage flash hider does the job but can be swapped out for any 14mm CCW male-compatible muzzle device, including tracer units and suppressors if you fancy a different look or an instinct-aiming advantage in low light. 

The outer barrel of the 7" FREYA™ is 8.5 inches in length, making it ideal for close-quarters work and aggressive skirmishers who appreciate a compact platform. Surrounding the barrel, we are treated to a uniquely lightweight skeletonised handguard boasting M-LOK slots at the 3, 6 & 9 o'clock positions with a short 20mm Picatinny rail extension providing a slightly longer receiver rail. The offset angles boast triangular weight-reducing ports, matching the receiver to complete the dynamic styling. The skeletonised handguard makes the front end of the FREYA™ easy and fast to point, making it an asset to a fast-moving playstyle. 

On the top of the handguard, we can find our front flip-up iron sight which is spring-loaded, requiring a press on the textured surface at the rear to deploy. The rear sight is mounted to the receiver rail and functions the same way; simply press the button and up it pops. Elevation adjustments are applied on the front sight using an AR-15 front sight adjustment tool and windage on the rear sight via the dial on the right side. The rear sight also features two apertures, a fine one for bright conditions and accurate semi-auto fire and a wider one for low light scenarios and full auto. 

Following the handguard, we come to the receiver which is constructed from alloy with a unique skeletonised design based on the real steel GrandPower R15 FREYA™ receiver. Practically everywhere that weight can be reduced, it has been, resulting in an ultra-modern look and superb handling and weight distribution. The forward assist button has been deleted, just like the best of real steel AR platforms, and the mock brass deflector is considerably smaller than mil-spec M4s, further reducing weight. As we would expect for a modern AR, the receiver boasts a 20mm Picatinny rail, meaning you can mount a red dot sight or scope straight away with no extra adapters needed. 

The layout of the controls matches other M4/AR-15 platforms, meaning no need to retrain if you are used to a standard AR despite the unique receiver of the FREYA™. The fire selector is positioned just above the pistol grip and offers 3 modes of fire; SAFE, SEMI and AUTO, with a 90-degree throw between each mode. This makes the selector easy to switch, but not so easy that it can be knocked out of position accidentally. Each mode is denoted with laser-engraved "SAFE-FIRE-AUTO" markings. The magazine release is on the right side of the magazine well and is accessible for a right-handed user with the tip of the trigger finger.

Pulling back the charging handle, located at the top rear of the receiver will open the dust cover and retract the mock bolt carrier to allow access to the rotary HOP-up adjuster. This is the latest HOP-up unit design for the M4/AR-15 and provides finer increments of adjustment and holds its setting more effectively when compared to the older gear style HOP-up unit. The charging handle has an extended latch for easier access, allowing even those with thick gloves to access the HOP-up unit, though you may need to take off a glove to turn the adjuster! 

The pistol grip of the FREYA™ 7" boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Each flank of the pistol grip includes fine crackle texturing, with additional linear texture on the front and back straps for perfect wet weather handling. The trigger is a "flat" trigger with a short finger ledge and textured front, making it ideal for pumping out rapid semi-automatic shots in CQB. 

At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees even if you mount a massive rifle scope, PEQ box and RunCam, the sling plate will be strong enough to support the weight. Following the sling plate, we come to the good old AR buffer tube, constructed from alloy and offering 6 adjustment positions for the pre-installed stock, or any other M4/AR-15 AEG stock you choose to mount!

The stock itself is a slimline design unique to the latest releases from Delta Armory. Featuring a QD sling socket on either side, a low-profile adjustment lever on the bottom together with conventional "footman loops", aka sling slots, the highlight of this stock is its rubber butt plate featuring lattice checkering and an angled section at the toe for providing grip in the most modern shooting stances, with or without body armour. If you have a preferred stock design, the stock can be swapped for alternative M4/AR-15 AEG stocks if you want to change up the looks!

The buffer tube also serves as the battery compartment for the 7" FREYA™. To access the battery compartment, you will need to pull the stock adjustment lever (located on the bottom of the stock) out and hold it in place, after which you can slide the stock off the buffer tube, revealing a Deans/T-Plug battery connector inside. We recommend a 7.4V 1300mAh LiPo in stick configuration for the R15 FREYA™ though you may need to keep the stock extended to fit this battery inside. Delta Armory recommends a LiPo battery measuring 1.4 x 1.9 x 10 cm approximately for full functionality of the sliding stock. 

Inside, the new EAGLE ETU/MOSFET system takes centre stage, offering more programmable options than ever before. The result is an impressive trigger response and respectable rate of fire, with more than enough range to compete with the big boys out in the woods. The ability to choose 3 or 5-round burst, binary trigger, sniper delay, semi-automatic only, AUG mode, trigger sensitivity settings and active braking levels give the FREYA™ 7" the edge over practically any other platform in this price range.  

If you need a speedy AR with a unique look, the FREYA™ 7"M-LOK M4/AR-15 AEG from Delta Armory is a fine choice. With a look which can't be imitated with aftermarket parts and pre-upgraded internals boasting the fantastic EAGLE ETU, the FREYA™ 7" is a foe to contend with in CQB!

Features

• Full metal construction
• 6.03mm Tightbore inner barrel - Superb accuracy potential 
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
• Muzzle brake pre-installed - Looks fantastic, suits the speedy build style
• Programmable EAGLE MOSFET/ETU Pre-installed - Even more options than the original Delta ETU
• 8.5" Barrel length - Ideal for CQB and aggressive playstyles
• 7-inch M-LOK handguard - M-LOK slots at 3, 6, & 9 o'clock positions
• 20mm Picatinny railed receiver - Ready for a red dot sight or scope 
• Flip-up aperture iron sights pre-installed - Adjustable and spring-loaded for fast deployment 
• Unique GrandPower receiver design - Ultra modern skeletonised looks
• GrandPower trademarks laser engraved on the receiver - Realistic and licenced!
• Rotary adjustable HOP-up unit - Accessible through the ejection port when the charging handle is held back
• Ergonomic pistol grip - Reduced grip angle for more comfortable shooting with the stock collapsed
• Enlarged trigger guard - Easy access to the trigger when wearing thick gloves
• Flat trigger - Great for rapid semi-auto shooting
• 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type and loadout
• Delta slimline stock pre-installed - QD sling point on each side, buffer tube battery compartment 
• Rear wired: Deans/T-Plug battery connector - Recommended battery: 7.4V 1300mAh LiPo in stick config 
• MOSFET/ETU programming instructions are available via the QR code on the wiring inside the buffer tube
• EAGLE MOSFET Functions:
  • 3 or 5 Round burst mode
  • Binary trigger
  • Semi-automatic only
  • Sniper delay
  • AUG Mode
  • Active braking
  • Pre-cocking
• Compatible with M4/AR-15 AEG magazines - Plenty of spares available

Package Includes

• Delta Armory R15 FREYA™ 7" M-LOK M4/AR-15 AEG
• 120rnd Mid-cap magazine
• Cleaning rod
• User manual