EMG TTI x STI JW3 Combat Master

The real steel Taran Tactical Innovations JW3 Combat Master featured in John Wick: Chapter 3 - Parabellum (2019), wielded by our hero to great effect against innumerable goons. Like other EMG products, this Armorer Works OEM pistols is rocking official licensing from TTI with detailed trademarks across the design, giving John Wick fans an authentic look to go with its flawless machining and unmatched quality.

Starting at the front, we can find 11mm CW female threading at the tip of the authentically coloured bronze outer barrel, allowing a tracer unit or suppressor to be fitted if you add a thread adapter.

At the front of the slide, take note of the crisp angles and machining; a massive improvement over the cast alloy slides found on most full-metal Hi-Capas. Use of CNC machining for the slide and frame makes this JW3 feel like a high-end aftermarket body kit, as does its prominent licensed Taran Tactical Innovations trademarks.

As with the real thing, you'll find dynamic swept-back slide serrations at both the front and rear, allowing you to cock the JW3 whichever way you like and benefit from maximum traction in any weather condition.

On either side of the slide, we have a single port cut at an angle to match the slide serrations, giving us a glimpse of the bronze outer barrel beneath. This is a bit part of the now iconic Taran Tactical look, and as with the serrations, are flawlessly cut with not a blemish to be found. Up top, we have our front iron sight, which is a light-enhancing sight with a green insert.

The rear sight is positioned at the rear of the slide (as it should be!), and offers both windage and elevation adjustment. Windage adjustments can be applied using the flathead screw on the right side, and the screw on the top controls elevation adjustment. Adjustable sights are rare on a pistol, and these are fantastic; if you intend to shoot at long range with your JW3, make sure you zero them in!

The adjustable HOP-up of the Upgraded JW3 is located on the bottom of the outer barrel and is accessible with the slide removed, in "field stripped" condition. To remove the slide, you will first need to remove the magazine and rack the slide to cock the hammer. With this done, you can pull the slide back to align the slide lock lever with the rearmost cutout on the left side of the slide.

With the slide in this position, you can push the slide release catch through from the right side of the frame, after which the slide can be slid forward and removed from the front of the pistol. The adjustable HOP-up allows you to tune the JW3 for different ammo weights and extend your range, adjusting the dial until the trajectory is as flat as possible.

At the front of the frame, we are treated to a 20mm Picatinny rail, as any combat-ready Hi-Capa deserves! This rail allows tactical flashlights and laser aiming modules to be mounted, but being a full rail as opposed to the usual pistol rail with a single slot, you can mount whatever 20mm accessory you want, even a bipod!

Moving along the frame, we come to the slide lock/release catch, which is slightly extended compared to a 1911 platform but not so extended that it gets in the way. The upper surface is equipped with serrations for all-weather functionality and is weight-reduced in the centre to maintain the JW3's superb handling qualities.

The manual safety catch is ambidextrous, located at the rear of the frame, well within the reach of either a left or right-handed shooter's thumb when the JW3 is held in a firing grip. This safety allows you to carry "cocked and locked" and also serves as a thumb rest, encouraging a consistent shooting grip with every draw.

The secondary safety device of the 1911 and Hi-Capa platforms is also present at the rear of the grip, known as the "beavertail grip safety". This safety ensures the trigger of the JW3 cannot be pulled unless the pistol is held properly, avoiding potential NDs, which are more likely due to the short and light trigger pull.

As with most Hi-Capas, the grip is a modular part which can be replaced with an almost unlimited number of aftermarket options. The grip is integral with the trigger guard, boasting a rounded stipple texture on each side, the front and rear, matching the real TTI JW3 perfectly.

It provides superb gripping qualities whether you wear gloves or not. We aren't sure whether this is hand-stippled, but it feels fantastic, gentle enough that it won't shred your hands but aggressive enough to keep the JW3 lodged firmly in your hands.

The magazine release is on the left side of the grip, easily reached with the thumb thanks to its extended surface, complete with checkered texturing. This is a standard push-through design just like other Hi-Capas, but its enlarged surface allows for faster reloads and makes this essential control far easier to find in a hurry on the battlefield.

At the base of the grip, we can find what is known as a "magazine well extension" or "flared magwell". This allows for faster reloads by guiding the magazine in. This can also allow for reloading on the move and "eyes-up" reloads, allowing you to continue to scan for targets as you bring your platform back online. It includes a cutout on either side to assist with extracting a magazine and a lanyard port at the rear for mounting a pistol retention lanyard.

If you've been looking for a glorious sidearm with trademarks, this is it! The EMG TTI x STI JW3 Combat Master combines CNC-machined externals with the licensed Taran Tactical Innovations trademarks to create a truly beautiful pistol. Whether you have a John Wick loadout planned or you simply appreciate a superbly made Hi-Capa with an elite real steel pedigree,  the EMG TTI x STI JW3 Combat Master belongs in your holster!

Features

• Full metal construction
• Licensed by Taran Tactical Innovations - Realistic trademarks!
• CNC machined slide
• 11mm CW Female threaded outer barrel - Tracer/suppressor ready with a thread adapter
• 20mm Picatinny frame rail - Ready for a tactical flashlight or laser aiming module
• Light-enhancing front sight with adjustable rear sight - Easy to pick up quickly in low-light situations
• Forward slide serrations - Serrations at the front make it easier to cock
• Ported slide - Ports on each side reduce weight and contribute to the high-end TTI styling
• 9x19 Engraved marking on the outer barrel - Visible through the ejection port on the right side
• Gear-adjustable HOP-up unit - Adjust for different ammo weight, accessible when the slide is removed
• Trigger guard undercuts - Encourages a high grip for more effective recoil control
• Extended magazine catch - Easy to find when working under pressure
• Stipple-textured grip - Matches the real JW3 perfectly and provides plenty of traction
• Ambidextrous manual safety - Accessible for left or right-handed shooters, also serves as a thumb rest
• Beavertail grip safety - Prevents the pistol from being fired if held incorrectly
• Flared magazine well - Guides the magazine in when reloading, great for speed and "eyes up" reloads
• Lanyard loop - Mount a pistol retention lanyard to the grip so your sidearm never goes missing
• Compatible with Armorer Works Hi-Capa magazines

Package Includes

• EMG TTI x STI JW3 Combat Master
• 30rnd Green Gas Magazine