EU Warehouse Stock

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

A Universal Retention Holster that is constructed from a tough Polymer and features a Locking Retention Design that will hold your Pistol securely in place until you want to draw it. The Holster is hugely compatible with a large range of Airsoft Pistols, fitting and working with over eighty models of Gas Blowback Sidearms. If you own lots of Pistols and want one Holster to rule them all... then the Amomax Per-Fit Universal Holster (for 80+ Pistols) is exactly what you were looking for.

A low profile plate carrier that comes included with thick dummy plates and has plenty of MOLLE and Velcro real-estate space to make this chest rig your own.

A low profile plate carrier that comes included with thick dummy plates and has plenty of MOLLE and Velcro real-estate space to make this chest rig your own.

Achieving comfort, durability, manoeuvrability and a means of carrying up to 4x STANAG magazines with more than enough room to expand with additional pouches. You can even remove the included MOLLE pouches to completely re-configure and mix everything up with a different range of magazine pouches such as AK or the ultimate speed-soft pistol setup.

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

If you're looking for a slim and simple alternative to your fully laden battle belt, the 8Fields Rigid Belt with QD Buckle is ideal. This belt is a "rigger" style belt, offering flexible Nylon webbing construction with an alloy "cobra" style buckle up front. 3 Sizes are available and all are adjustable via the elasticated design, meaning if you eat a massive breakfast before the skirmish you shouldn't have to readjust before you get stuck in!

Rigger belts are ideal for fast-moving playstyles and those who prefer to carry kit on their chest rig or plate carrier, keeping their belt kit minimalist for improved agility. This belt allows you to add holsters and mag carriers with the "paddle" mounting system and is also compatible with most drop-leg holsters. If you want to add MOLLE pouches, pair the Rigid belt with the 8Fields Tactical Belt Mounted MOLLE Panel and you can do just that!

Its rigid Nylon material also means this belt will not readily curl or fold over as standard street belts might with holsters and mag carriers mounted. This type of belt also makes a fantastic everyday belt, with a quick-to-operate and strong buckle ideal for emergency situations. If you like a speedy, minimalist loadout and need something to keep your trousers up and carry your holster, the 8Fields Tactical Rigid Belt with QD Buckle is a fantastic choice!

If you're looking for a slim and simple alternative to your fully laden battle belt, the 8Fields Rigid Belt with QD Buckle is ideal. This belt is a "rigger" style belt, offering flexible Nylon webbing construction with an alloy "cobra" style buckle up front. 3 Sizes are available and all are adjustable via the elasticated design, meaning if you eat a massive breakfast before the skirmish you shouldn't have to readjust before you get stuck in!

Rigger belts are ideal for fast-moving playstyles and those who prefer to carry kit on their chest rig or plate carrier, keeping their belt kit minimalist for improved agility. This belt allows you to add holsters and mag carriers with the "paddle" mounting system and is also compatible with most drop-leg holsters. If you want to add MOLLE pouches, pair the Rigid belt with the 8Fields Tactical Belt Mounted MOLLE Panel and you can do just that!

Its rigid Nylon material also means this belt will not readily curl or fold over as standard street belts might with holsters and mag carriers mounted. This type of belt also makes a fantastic everyday belt, with a quick-to-operate and strong buckle ideal for emergency situations. If you like a speedy, minimalist loadout and need something to keep your trousers up and carry your holster, the 8Fields Tactical Rigid Belt with QD Buckle is a fantastic choice!

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft  Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds. 

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

A 1000D polyester constructed panel for Buckle Up systems, which offers MOLLE loops on the front two M4 magazine pouches, 2 flap closure pistol magazine pouches, and three M4 magazine pouches divided by elastic retainers at the rear. This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is completely velcro which helps secure the pouch in place when connected to a Buckle Up system.

If you like extended pistol mags or you are running an Airsoft SMG these pouches should suit you well! The 8Fields Tactical Retention Pistol/SMG Molle Magazine Pouch Large is designed to hold extended pistol magazines and submachine gun magazines and can be adjusted to fit a wide variety of mag sizes thanks to the adjustable bungee cords on the rear of the pouch. 

These pouches are specifically designed to be attached to MOLLE Platform items, such as rigs, plate carriers and even backpacks which feature MOLLE panels.

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

If you have your snappy suit ready and you now need a sidearm, the TTI JW4 Pit Viper from Army Armament is a perfect match! This cutting edge new Hi-capa variant is the star of the show in John Wick: Chapter 4 and is kitted out exactly how it is in the movie, with a built-in compensator, light-enhancing iron sights and a flared magazine well for fast target acquisition and speedy reloads!

Boasting full metal construction, Hi-capa GBB magazine compatibility and extended and enhanced controls, you would be hard-pressed to build a Hi-capa with a more modern feature set than this! If you are a fan of the John Wick franchise or you are simply looking for an up-to-date combat-optimised Hi-capa platform, the JW4 is as slick as they come!

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

A simple and lightweight Hydration Bladder included with a pouch for mounting on MOLLE systems, which will help keep you fighting fit throughout the day.

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

A mock Airsoft knife for players to use as part of their rig to look extra menacing, complete the look, or to use as a prop knife for those ever embarrassing knife kills.

An Airsoft modular and adaptable tactical chest rig with in-built magazine pouches and MOLLE webbing, so you can customise it with more pouches. You can carry all the ammunition and gearyou need during a long day of Airsofting on this versatile rig!

An Airsoft modular and adaptable tactical chest rig with in-built magazine pouches and MOLLE webbing, so you can customise it with more pouches. You can carry all the ammunition and gearyou need during a long day of Airsofting on this versatile rig!

A foldable Dump Pouch for Belt Systems, available in range of colours, that is perfect for facilitating fast 'operator-style' reloads or just for general storage of items that don't have a place on your Rig, such as TAG Rounds. Constructed to a tough standard using 600D Polyester, this Pouch is Water Resistant and tough enough to carry up to about 8 x M4 / STANAG Magazines. Easily mounts to your Belt via Velcro Straps, and features a Velcro Retention Strap to keep the contents secure.

A 1000D Polyester constructed Double Magazine Pouch for Pistol Magazines, which is MOLLE compatible and retained by Elastic Loops. The front face of the Pouch has Velcro for adding patches and other flair to your loadout.

Looking for AK74 magazines for a modern loadout? The 150rnd Mid-cap from CYMA is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. For a modern AK74/105 loadout this magazine is perfect. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or AKS74U AEG but will fit and feed in most AK platform AEGs.

If you've got a lot of mags and need to keep them secure and to hand at all times, this Triple Open Top 7.62 Magazine Pouch is for you! Constructed from 1000D polyester, this mag pouch holds 3 x 7.62x51 style magazines, including SCAR-H, G3, AR-10/SR25, and can also take AR36 and AK-74/74 mags. This pouch will not fit 417-style magazines.

Each magazine is retained with elasticated loops and can be mounted wherever you have MOLLE webbing, including your rig, belt and backpack. On the front of the pouch, we have additional MOLLE loops so you can stack more MOLLE pouches on the front for heavier loadouts. 

A Suppressor for Airsoft Guns with a 14mm Clockwise or Counter Clockwise Thread, which is made from Aluminium to be both tough and lightweight. 

The Suppressor is foam filled, which will slightly dampen your Muzzle Report, and it also has a Spring Core which keeps the foam in position and stops your BBs fouling on the foam as they try to leave the barrel. 

If you have a custom Airsoft Gun or want to hide an Inner Barrel Extension, then this Dummy Sound Suppressor is the perfect finishing touch.

A MOLLE compatible Admin/Utility Pouch for Chest Rigs and Tactical Vests that have available MOLLE loops. It is secured by a Dual Glove-Friendly Zips and features an Internal Organiser, as well as Front Velcro ID Panel and 2 x Rear M4 Magazine Pouches.