Airsoft Boneyard

This suppressor once contained a tracer unit and had a tank for mist functionality, but these have both been removed. It is now just a stylish suppressor with a lack of bells and whistles, but it's ready to be the bell or whistle to add to your primary platform!

Some residue of mist fluid from its past days may be found internally, and slight cosmetic damage can be seen externally, but overall it is clean, gutted of its old internals and has a perfectly good thread ready to meet the one on the end of your barrel.

There are multiple of this item in stock - Please note that because of this there are differing external damage examples between them including slightly loose bases and cracked tracer caps etc..

These CYMA/EMG CM.102 SGR-12 Tri-Shot Shotguns found their way to the Boneyard due to generally poor quality control. These are brand new guns, unused and never shot but we can make no guarantees of proper functionality. As with all Boneyard items, these do not have a warranty and are sold as spare parts, wall hangers or props.

For a detailed product description and more specifications, click HERE to view the original product.

This replica has ended up into our boneyard due to a few issues including; a missing slide lock, a knocker valve on the magazine that's leaking, the trigger is slightly damaged, the follower is also broken in half and the box that it comes in with is also damaged. In general we can safely assume that this was probably chucked down a cliff at some point. With these issues addressed, this could be an ideal wall hanger or even as a prop if you were to permanently attach the slide and barrel assembly to the frame.

This replica has found its way into our boneyard due to missing a handful of parts - these parts include (as far as we can tell) part of the spring guide that hooks onto the hop unit, the outer barrel, slide lock and the magazine. Other than this, we cannot easily identify other missing parts but a thorough inspection is recommended. The left slide safety appears to be loose so this may end up falling off at some point so we recommend also looking into this issue. This replica may be ideal as a parts donor though if you want the challenge then this could be a decent project if you're into 1911s!

This replica has found its way into our boneyard due to missing various parts; from what we can visually see, the extractor rod as well as the rest of its assembly is missing and the CO2 seal is also missing. Even if both parts were to be sourced and installed, we cannot guarantee that the replica would be functional due to the fact that we're unable to test it in its current state for further faults. Otherwise, this would be a great cosplay item or a wall hanger.

This replica has found its way into our boneyard due being non-functional; we're not entirely sure what lead to this happening though out of the box, the included battery that is usually found with this replica is nowhere to be seen so a replacement would have to be sourced if you're interested in this boneyard.

Regardless, we found ourselves a spare battery to test though when plugging the battery in; no matter what fire mode we chose, the replica wouldn't shoot so this either may be a battery problem (where we picked up a dead battery) or there's something more problematic occurring; further investigation is required.

This replica has landed in our boneyard due to the magazine release missing its spring. We're unsure how this has occurred but if you're wanting to use this replica for skirmish, it would be ideal to find the replacement part for the magazine catch - that's if the replica even works as we're unable to test for further faults as the battery and battery charger are nowhere to be seen. Alongside this, the magazine is also missing so a replacement mag would also have to be sourced. Ignoring these issues, this could be quite a good prop or parts donor as the replica is in good condition externally with marks that are barely visible.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor. Alongside this, the magazine is missing so a replacement should be sourced. The grip panel is also falling off so would require a bit of TLC to make it ideal as a prop.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor. Alongside missing the battery and battery charger, the magazine also appears to be missing.

This replica has landed in our boneyard due to supposedly not being functional - with this in mind, we cannot verify this claim due to the fact that the replica is missing its battery and charger so we have nothing to use to test this replica. Ultimately you could use this as a prop or as a wall hanger as the replica is externally mint par from a few scratches/wear marks where you'd expect there to be wearing (fire selector etc).

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has found its way into our boneyard due to the magazine latch not being present - the entire latch alongside the spring is missing meaning the magazine may have fallen out during use as that isn't present either. Alongside these issues, the charger and battery are also missing so replacements are to be sourced if you're wanting to use this replica if it's functional which we cannot test given we have no battery to verify if there's any faults present. This replica may better suit being a parts donor given the already missing parts and uncertainty of functionality though could also be suitable as a prop for cosplay.

This replica has landed in our boneyard due to the magazine catch being disassembled - from what we can see, all necessary parts are contained in the box but again is disassembled so we can only assume either part is damaged in some sort of fashion and would recommend doing an investigation to see if it works and if it doesn't to source the replacement parts. Since the battery and battery charger is also missing, we cannot verify if the replica is functional so we cannot guarantee if you will get a faulty or non-faulty platform. Ultimately if it is faulty, it could double as a prop for cosplay or even as a parts donor due to the good condition the externals are in.

This replica has found its way into our boneyard for a few reasons - first of which is part of the housing that holds the spring for the external hammer has broken which means the slide cannot be secured in place since this is what holds the slide and frame together. Alongside this, the replica is missing its battery and charger meaning we cannot test for any faults and to see if the replica is functional so you'll have to prepare for this if you source replacements. If the replica is non-functional, it could work as a prop for cosplay or even be a parts donor if it is functional.

This replica has landed in our boneyard due to a few issues - first of which is that the tabs that secure the slide in place have snapped off completely meaning theres nothing to secure the slide and will fall off during use. Alongside this, it's missing its battery and battery charger so we cannot test its functionality so you could ultimately end up with a perfectly fine replica or something that needs some work doing to it internally. Apart from this; the replica used to be two-tone red but the paint was stripped - there is still residue red paint under the slide alongside in the serrations so this replica does need a bit of TLC.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has found its way into our boneyard for unknown reasons - as far as things go; it's missing its magazine, battery and battery charger as well as being marked in places suggesting this was used for a skirmish and may have been returned for a reason that we cannot determine so there's a good likelihood of this replica not being functional but that doesn't stop it from being a perfect prop for cosplay or even as a parts donor.

This replica has landed in our boneyard due to magazine retention issues - doing some quick fiddling suggests that the latch itself is worn down or has poor tolerances from factory as pushing the mag release in the opposite direction does hold the mag but as soon as you let go, the magazine will drop out. Apart from this issue, we are unsure on any other faults with this replica due to it missing its battery and battery charger so this may be better as a prop or as a parts donor if this replica turns up non-functional.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor.

This replica has landed in our boneyard due to a portion of the slide being chipped off - we're unsure how this has happened but ultimately doesn't affect functionality. Regarding function, we're unable to test for internal issues due to the battery and charger going missing so we cannot guarantee that the replica can actually shoot or has some weird electronic issue - if this is the case, this replica could ultimately serve as a parts donor or as some sort of prop.

Unknown fault(s). Not in one piece. Missing magazine. Iron sight loose in box.

This replica has found its way into our boneyard for a multitude of issues; the main issue is that majority of the replica is disassembled and is missing parts. From what we can see, some parts on the slide is missing with the rear irons being present but difficult to re-attach to the replica suggesting this may not be the original sight. The trigger linkage also seems to be absent or broken in some fashion as pulling the trigger does nothing. We see this replica more of a parts donor than anything else if you have broken trigger components or BBU parts (housing or nozzle in your own MEU 1911 series replica. The replica is also missing its appropriate magazine.

This replica has found its way into our boneyard due to missing its slide as well as some frame parts - from what we can see; the outer and inner barrel alongside its accompanying hop unit are both missing though the spring guides and recoil spring are present. The BBU in its entirety is also not present. 

Regarding the frame, it appears that the slide safety alongside the pin that keeps the grip safety together are both missing. Finally, the magazine is also not present. Given the amount of stuff that's missing, this is probably best as a parts donor for what's still left for your own MEU series replica.

This replica has found its way into our boneyard due to the magazine release being broken - it appears it may just be the spring that retains the release although other parts may be missing that holds it in place so further investigation is required to route out what replacement part is needed. Other than this though, firing through our chronograph gave us an average reading of 215 FPS on .2 BBs so ultimately this replica just needs its mag release fixing to bring it back to its former glory. Another thing to note is the magazine, battery and battery charger is missing so all of these would need a replacement sourced.

This replica has found its way into our boneyard due to a few issues; first and foremost, the trigger seems to be broken as there's no spring tension - pulling the trigger all the way back whilst a battery is plugged in also provides nothing so whatever linkage/contacts are present is potentially also broken. The left side tab to keep the slide on the replica is broken as well though the right tab is still in one piece so you'll have to be careful when using this replica - keep in mind that you will need to source a battery and charger if you are wanting to use this replica since both are missing.

This replica has found its way into our boneyard due to the rear slide tabs breaking off completely - due to this fault, the slide freely comes off and isn't secure so you will have to replace the appropriate parts in order to bring this replica back to its former glory. Despite this, the replica is still fully functional when held together manually; firing at 235 FPS on .2 BBs. The charger and battery are also missing so these would have to be sourced in order to use this replica.

This replica has landed in our boneyard due to multiple issues that make it unusable - issues include the trigger being broken to where it's loose and doesn't cycle the replica, the wire loom has been cut for unknown reasons although we can only predict that it may have got trapped between the slide and the frame of the replica and excessive force was used to cut it and although this is a cosmetic issue: the external hammer is broken and doesn't retain itself so it'll just fall over when moved around. If you was to glue most of this stuff in place, it could work quite well as a prop or wall hanger as adding on to the issues, the battery and charger are missing.

This replica has landed in our boneyard due to a few issues; the most concerning is when inspecting the battery connector, it appears to have melted/burned in some sort of fashion so this could mean a few things - most likely is that the electronics/mosfet is faulty and was drawing too much power. Alongside this issue, the magazine, charger and battery are also missing so these would also have to be sourced. We believe this replica would better suit being a prop for cosplay or something similar given the mentioned issues.

This replica has found its way into our boneyard for unknown reasons - as far as we're aware, the replica is fully functional and will happily fire on semi and full auto. Firing through our chronograph gave us an average of 220 FPS on .2 BBs. Do note a few things: The magazine is missing and a replacement would have to be sourced alongside a missing battery and battery charger. Using our own battery, we found it quite difficult to insert it into its slot so we advise caution not to damage your own battery by forcing it into position if you plan to use this replica for skirmishing.

This replica has landed in our boneyard due to apparently not being able to cycle - through our own testing however, the replica seems to be fully functional minus a slightly sluggish performance. Firing through our chronograph, we were seeing 200 FPS on .2 BBs so it's more than capable to be used during a skirmish. We will note that the magazine alongside the charger and battery are all missing so replacements will have to be sourced in order to use this replica.