Airsoft Boneyard

These CYMA/EMG CM.102 SGR-12 Tri-Shot Shotguns found their way to the Boneyard due to generally poor quality control. These are brand new guns, unused and never shot but we can make no guarantees of proper functionality. As with all Boneyard items, these do not have a warranty and are sold as spare parts, wall hangers or props.

For a detailed product description and more specifications, click HERE to view the original product.

This Aug replica has found its way to the Boneyard after a long run as a Two-Tone example/display piece in our Showroom. The gun itself should be fully functional and in an almost brand-new condition, aside from the Two-Tone painted exterior and what needs to be noted as now missing, its foregrip.

The lack of the foregrip certainly does take away a little from the Aug's iconic look, but will not directly affect the performance or functionality of the platform. So, if you're feeling like standing out from the crowd of M4s and AKs, you can pick this thing up today with a healthy discount and no UKARA or other defence required at checkout!

This replica has found its way into our boneyard due being non-functional; we're not entirely sure what lead to this happening though out of the box, the included battery that is usually found with this replica is nowhere to be seen so a replacement would have to be sourced if you're interested in this boneyard.

Regardless, we found ourselves a spare battery to test though when plugging the battery in; no matter what fire mode we chose, the replica wouldn't shoot so this either may be a battery problem (where we picked up a dead battery) or there's something more problematic occurring; further investigation is required.

This CO2 shotgun leaks. It has been attempted to be repaired twice, but with no luck. This means it is non-functional; however, the controls and racking system still work. This, paired with the blue two-tone, makes it a great cosplaying item or wall hanger. The body is slightly marked, but with a new paint job, you're onto a winner here!

If you're in need of an officially licensed GLOCK lower, you're in luck! For whatever reason you may need or want it, building a crazy project or just replacing a broken one of your own, this lower comes from an Umarex GLOCK 17 Gen.4 CO2 Airsoft Pistol.

This replica has found itself in our boneyard due to a simple issue - that being that the replica is leaking gas; given it has an internal gas reservoir, it may be more difficult than normal (with normal gas magazines) to repair this replica as filling the replica with gas doesn't present us with a leak from the fill valve - instead it seems to be leaking internally, most likely where the gas is transferred to the compression unit to accelerate the BB so ultimately you could use this as a prop given you'll need a good amount of knowledge with NBB replicas to make this sidearm work again.

Strictly for spare parts or for use as a non-functional prop, this replica has at some point been disassembled and not put back together properly. It is unknown if it even could be, or if all of the necessary parts are still present to try so with.

If you’re in need of a niche part or need a paperweight for your desk, this could be what you’re after. It's a decent prop, featuring licensed Walther trademarks.

This replica has landed in our boneyard due to a few issues - first of which is that the tabs that secure the slide in place have snapped off completely meaning theres nothing to secure the slide and will fall off during use. Alongside this, it's missing its battery and battery charger so we cannot test its functionality so you could ultimately end up with a perfectly fine replica or something that needs some work doing to it internally. Apart from this; the replica used to be two-tone red but the paint was stripped - there is still residue red paint under the slide alongside in the serrations so this replica does need a bit of TLC.

This replica's trigger reset is broken, meaning the hammer needs to be re-cocked every time you want to be able to shoot again. As well as this, the polymer moulding of the slide appears to be quite warped, it leaning to one side when looked straight down.

Despite the faults with the platform, it is still all in one piece and is in great condition externally so it could make for an awesome prop or display piece if not botched back into its original working order.

This replica has found its way into our boneyard due to a few issues; first and foremost, the trigger seems to be broken as there's no spring tension - pulling the trigger all the way back whilst a battery is plugged in also provides nothing so whatever linkage/contacts are present is potentially also broken. 

The left side tab to keep the slide on the replica is broken as well though the right tab is still in one piece so you'll have to be careful when using this replica - keep in mind that you will need to source a battery and charger if you are wanting to use this replica since both are missing. Last but not least, the connectors appear to have snapped so you will need to source a replacement wire loom.

This replica has landed in our boneyard due to a few issues; first of which is the wire loom has snapped so a replacement is to be sourced if you're wanting to use this replica. Alongside this issue, the magazine, charger and battery are also missing so these would also have to be sourced. We believe this replica would better suit being a prop for cosplay or something similar given the mentioned issues.

This pistol is missing its magazine and is untested. It looks to be in a functional condition, but that cannot be guaranteed. It does, however, come with a two-tone blue paint job, meaning that you don't need a UKARA to purchase this boneyard!

This replica has landed in our boneyard due to having sluggish performance; alongside this, the battery and charger are missing so replacements should be sourced if you're wanting to use/test (if you know how to work on AEP platforms) this replica. If you don't feel like troubleshooting this replica, it could be a decent prop/cosplay item which given it's already two tone, you don't need UKARA to obtain this boneyard!

This replica has found its way to our boneyard due to the barrel being broken where it's held in place with a pin - due to this, it will slowly fall off when the cylinder revolvers given the chamber has spring tension pushing against the barrel. Ultimately you could use this as a display piece or as a cosplay item unless you can source a replacement barrel as the replica is functional.

This replica has found its way into our boneyard due to having low FPS - as far as things go, this is the only major fault though the replica seems to have been used quite a bit though we will also mention that the magazine is missing so if you have a spare around, this could be a decent sidearm to have in your arsenal! Otherwise if you can't source a spare mag, this could be a good looking 'worn' wall-hanger.

This premium piece of hardware is in the Boneyard due to its warped BB track leading to misfeeding, this makes it ideal for those looking to strip high‑quality replacement parts at a discount. The adapter is designed for Tokyo Marui ZET System and CYMA CGS M4/AR‑15 GBBRs, allowing the use of standard AEG magazines with HPA for consistent FPS and improved accuracy.

This replica has landed in our boneyard due to half of the included shells missing their corresponding rubber seal - due to this, they are not functional given these seals are required to hold the BB in place whilst using the replica. The other three shells are fine however so you don't have to worry as much about getting additional shells, especially if you plan to use this as a prop or wall piece anyways.

This officially licensed replica has unfortunately had its connector cut. With true trades and pristine externals, it would still make for an excellent prop or visual display piece. It could also serve as a discounted source of spare parts for repairs or projects on other replicas.

Are you after the iconic russian grach purely to add to your collection as a display piece or even as part of your cosplay? Look no further than this boneyard! As far as things go, the internal gears have stripped meaning this replica is rendered unusable and potentially unfixable unless you're able to source replacements (and if you know how to work on an EBB AEP like this). We will also note that the charger for the battery is missing though the magazine is still present (has a battery built in). 

This Desert Eagle replica is shooting at quite a low FPS. The reason for this is unknown, but it's certainly not performing quite well enough to hold up in a skirmish environment. Whether you’ve got the skills for a tune-up or are in need of a cheap prop - enjoy the healthy discount on this otherwise great condition replica!

This replica is in the Boneyard due to missing its magazine. The replica itself is perfectly fine and in pristine condition, just needs a new magazine and it'll be good to go! This impressive Desert Eagle replica feels solid in the hand and delivers seriously hard hitting recoil! One you don’t want to miss.

This replica is in the Boneyard due to its leaking magazine. The replica itself is perfectly fine and in pristine condition, just needs a new magazine and it'll be good to go! This impressive Desert Eagle replica feels solid in the hand and delivers seriously hard hitting recoil! One you don’t want to miss.

This replica is in the Boneyard due to its leaking magazine. The replica itself is perfectly fine and in only a slightly worn external condition, just needs a new magazine and it'll be good to go! This impressive Desert Eagle replica feels solid in the hand and delivers seriously hard hitting recoil! One you don’t want to miss.

This replica has found its way into our boneyard due to having low FPS - from testing, we were seeing 140 FPS on .2 BBs which is half of the advertised FPS for a brand new V-61 replica. Despite this, the replica seems to be in decent condition externally so this could be ideal as a wall hanger or even as a prop. There was a report that this replica misfeeds however we didn't experience this during testing.

This replica has found its way into our boneyard due to an issue regarding the cycling of the slide - from testing, it seems that the external hammer is the culprit of this issue and catches the slide when it goes back - this happens more frequently once the gas in the magazine starts to run out though we believe due to the weak recoil spring, this especially doesn't help with the cycling. Potentially installing a stronger recoil spring could alleviate this issue by quite a bit but as mentioned, once gas capacity starts to run out, the issue may occur again.

If you need to add a uniquely menacing look to your setup, this launcher mounts to 20mm RIS rail! Still able to fire and in good condition, this launcher is only in the boneyard because it's missing a catch necessary to keep the tube itself from slipping out from under the rail when open for reloading. So long as you don't take your hand off it, it'll be fine!

You can either run it how it is, try to repair it, or leave it slammed shut and never shoot from it, just having it be an awesome looking accessory under your rifle.

This replica has a cut connector and a damaged dovetail, rendering it non-functional. It cannot be shot due to its now broken wiring and it also struggles to stay in once piece as the slide can easily detach due to the chipped dovetail. It could make for a bargain source of spare parts if you've got any ongoing projects or custom builds related to the platform, but otherwise it'd be best served as a prop if glued shut.

Due to the Two-Tone red paint, a UKARA or other defence will not be required for purchase.

This replica is in the Boneyard due to its leaking magazine. The replica itself is in fairly rough condition, but really just needs a new magazine and it'll be good to go! This impressive Desert Eagle replica feels solid in the hand and delivers seriously hard hitting recoil! One you don’t want to miss, especially since it's Two-Toned red, meaning a UKARA or other defence will not be required for purchase.

This shotgun remains in good external condition, but is leaking, missing a nozzle, and has a disassembled stock. If you have the technical capabilities to restore it, this full metal, gas powered replica will certainly be worth your time and will definitely be a game changer if CQB is your thing!

You'll want to hear how this thing sounds when it's racked...

This replica has found its way into our boneyard due to a few issues; first of which is the magazine is dysfunctional and leaks when a CO2 bulb is inserted so this will either need to be repaired or a new magazine is to be sourced. The barrel of the replica has also been disassembled from the replica and the slide is stuck where you can still rack it but disassembly is difficult - due to this, we recommend this replica as a parts donor or if you've had enough time working with desert eagles; this could be a decent project build.