King Arms Limited Edition PDW 9mm SBR AEG

This limited edition SBR comes with the choice of some incredibly unique and flashy furniture. It also comes with an aluminium alloy handguard and M4/MP5 hybrid receiver that maintains the easily understandable assault rifle controls but allows you to use the smaller MP5 mags, so you can carry many more spares on the battlefield.

Starting at the tip of the outer barrel, we have a muzzle device which is styled after real steel linear compensators intended to reduce recoil in short-barrelled platforms. The compensator also functions as a sound amplifier, giving the 9mm SBR an intimidating muzzle report, making it an asset in CQB. The compensator attaches to the 14mm CCW male threading at the tip of the outer barrel, so if you need a tracer unit to keep heads down or you like to sneak around with a suppressed SMG, this is not out of the question!

The handguard is constructed from aluminium alloy. It has a 20mm top rail for long scope//sight setups and also comes with 20mm Picatinny rail sections pre-installed onto the M-LOK attachment points. This gives you much more choice when it comes to available attachments and accessories!

The 9mm SBR has a 7-inch handguard. As you receive it, both variants come with fully adjustable Troy-style flip-up iron sights, which can be used as the primary sight or left flipped down on the rail when used with a scope or red dot sight. The sights can also be removed entirely for those who follow the mantra “spray and pray”.

The receiver follows the familiar to most M4/AR15 layout but with a selection of ambidextrous controls and a new design for the magazine release to facilitate the 9mm SBR’s compatibility with MP5/SMG-5 AEG magazines. The fire selector switch is positioned just above the pistol grip on the left side and has a 90-degree throw between fire modes, allowing for fast operation with reduced risk of accidentally slipping into the wrong fire mode.

The magazine release is very similar to the MP5/SMG-5 platform, offering an M4/AR15 style release button on either side, with the option to use the centrally positioned ambidextrous MP5 style paddle magazine release instead. Having two options for releasing the magazine makes the 9mm SBR easy to use regardless of your experience level, and the M4/AR15 style release is great for emergency reloads, while the MP5 style release is perfect for retention reloads for those who don’t like throwing their magazines around.

The ejection port is located on the right side of the upper receiver, similarly to an M4/AR15, but with a smaller window to correctly simulate the 9mm styling of the SBR. This is a nice little detail for those in the know, as it mimics the original Colt SMG well, which was the first 9mm chambered M4/AR15 style rifle. The charging handle is in the same spot as on the M4, and pulling it back will open the dust cover and retract the mock bolt, revealing the gear HOP-up adjuster inside. The HOP-up applies a varied amount of backspin to your projectiles, providing better stability and allowing you to tune the AEG for different weights of ammo.

Behind the ejection port, we have a mock brass deflector and mock forward assist button, just like a real M4/AR15 and other real-world 9mm AR-style SMGs. These parts aren’t functional on an Airsoft AEG, but are an essential part of a realistic-looking modern 9mm AR. The forward assist button can be pressed and is a separate part, avoiding the tell-tale signs of a replica seen in cheaper alternatives.

Over on the left side of the receiver, we can find the enlarged bolt release catch of the 9mm SBR, which has texture on its surface to aid easy use in wet weather conditions. The bolt catch doesn't really serve any function in the Airsoft AEG but is nonetheless included for realism, and its enlarged nature fits well with the 9mm SBR’s modern aesthetic.

The stock of the 9mm SBR is a PDW-style sliding stock, offering a more compact alternative to the usual M4/AR15 buffer tube with multiple levels of adjustment built in. The stock adjustment button is located on the base of the stock and is accessible from either side, and just to the rear of the button, we have an ambidextrous sling point ideally suited to single-point slings but also useful for two-point sling setups if you add an aftermarket front sling point to the handguard. The stock has a textured butt plate and cheek rest, making it very comfortable to use in any position, and inside the stock tube is where we find the battery compartment of the 9mm SBR.

To access the battery compartment, you will need to remove the stock and bars from the base and remove the rear plate of the stock tube. To remove the stock, you will need to hold the adjustment button down and press the small pin which protrudes from the left side stock bar, after which the stock will slide off to the rear.

With the stock removed, you can then press the two tabs on the rear of the stock tube together, which will allow it to come free. Inside, you will see a mini-Tamiya battery connector to which you mount your battery of choice. For the King Arms 9mm SBR, we recommend a 7.4V 1300mAh LiPo battery in stick configuration, the same type which fits in the standard M4/AR15 buffer tube.

On the inside, the 9mm SBR has a built-in MOSFET to improve the trigger response and electrical efficiency of the platform, giving superb CQB potential in skirmish sites restricted to semi-automatic fire only. The steel gearset runs on 7mm ball-bearing bushings to reduce friction and prolong the life of the parts, and the version 2 gearbox is fully compatible with aftermarket upgrades for those who like to push the limits of performance.

The 9mm SBR replica is perfect for those Airsoft skirmishers who need a small and compact CQB platform and are conflicted between buying a Submachine Gun or a Rifle. Can't decide? Why not have the benefits of both?

Features

• Aluminium alloy and high-density polymer construction
• Version 2 gearbox - Compatible with aftermarket version 2 parts
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
• Designed for CQB environments - Great for aggressive playstyles
• A great middle ground between the AR and MP5/SMG-5 platform
• Safe / Semi / Fully Automatic Fire Modes - Enhanced selector switch design
• Gear adjustable HOP-up unit - Compatible with AEG inner barrels & HOP-up rubbers
• Uses TM / Marui standard MP5 AEG magazines
• MP5/SMG-5 style ambidextrous magazine release - Great for left-handed shooters
• M4/AR15 style button magazine release - Use whichever you prefer!
• Flat blade-style trigger for rapid follow-up shots - Semi auto spam in CQB
• Ergonomic pistol grip design with replaceable backstraps - Adjust for a perfect fit
• M-LOK handguard - 20mm Picatinny preinstalled sections
• 20mm Picatinny railed receiver - Ready for a red dot sight or scope
• Sound-enhancing linear compensator style flash hider - BOOM BOOM BOOM
• Removable Troy-style flip-up iron sights - Adjustable for windage and elevation
• Sliding multi-position PDW stock - 7 Positions of adjustment
• Battery storage compartment in the stock - Accessed by removing the end cap
• Mini-Tamiya battery connector
• Quick change spring V2 Gearbox - Easy power tuning
• 8mm Bearing Gearbox - Reduced friction thanks to larger bushings
• Integrated MOSFET - Snappy trigger response, battery protection
• Compatible with most MP5/SMG-5 AEG Magazines - NOT compatible with CYMA Polymer mags
• Looks great with CYMA Straight MP5 Mags: Oldschool | Standard

Package Includes

• King Arms Limited Edition PDW 9mm SBR AEG
  • 100-round Mid-cap magazine
  • Replacement grip back strap set