Specna Arms MP40 RETRO SMG AEG

This is a wonderful replica of one of the most common automatic weapons of the Second World War, which accurately captures the real steel MP40's appearance with its characteristic hooded front iron sight and a choice of either brown bakelite-style plastic furniture or black. The stand-out feature of the Specna Arms MP40 RETRO is its antique finish, a far closer match to the real deal than other replicas.

Although designed as a Machine Pistol, the MP40 features an under-folding stock constructed from Alloy, which, when not in use, neatly folds away swinging down under the gun, reducing its size for CQB or storage, and providing users with an additional grip.

At the tip of the MP40's alloy outer barrel, we can find a thread protector which conceals 14mm CW male threading beneath. This means that you can add any 14mm CCW male threaded accessory using a 14mm CW to 14mm CCW adapter. Adding a tracer or suppressor to the MP40 may not be the most historically accurate choice, but it sure does look cool and gives the AEG some added battlefield functionality.

Following the thread protector, we come to the front sight of the MP40, which is a square front sight post surrounded by a protective hood. The hood protects the front sight in the event of a drop, avoiding potential damage to this vulnerable and essential part of the AEG. The front sight is the perfect size for Airsoft engagements, being wide enough for fast acquisition but fine enough that accurate shots can still be made.

This front sight pairs with the rear "notch" sight, which offers two selectable notches of different sizes, with the secondary notch being optimised for longer ranges. The rear sight is located midway along the receiver, giving the MP40 a long sight radius for better accuracy.

Moving rearwards, we come to the barrel nut, which connects the outer barrel to the receiver. On the left side, just behind the nut, we can find our front sling point, which can be set up in conjunction with the rear sling point at the back of the receiver for a traditional MP40 replica sling.

Next up we reach the receiver, which is designed to perfectly simulate the real MP40's stamped receiver construction. The magazine well is a separate piece which is bent over the top of the receiver around the ejection port, and the top of the receiver includes the grooves and geometry of the real MP40's stamped receiver. This is a nice touch and keeps the MP40 faithful to the real thing, even on close inspection. The receiver is also constructed from steel, which is a great choice for both realism and strength.

The magazine release is located on the left side of the receiver, on the magazine well, and can be pressed with the support hand thumb during a reload. The surface of the release is textured to ensure you can press it in any weather condition and is well placed considering that the MP40 was designed to be gripped by the magazine, or just behind.

This updated version of the AGM MP40 has a new fire selector system, sidestepping the older design with its unrealistic H&K-style rotary selector. The fire selector is now integrated into the charging handle; when it is pushed forward, the SMG is in 'Semi,' and when it is retracted, the AEG is in 'Fully Automatic'.

The "safe" position is provided by an "on/off" switch found on the base of the pistol grip. This gives us Airsoft-worthy functionality but keeps the exterior entirely faithful to the real MP40.

The adjustable HOP-up of the MP40 is controlled via a Sliding Lever and is hidden behind the mock bolt carrier inside the ejection port. To access the HOP-up adjuster, all you need to do is hold the charging handle back and release it once you have completed your adjustment.

The lower body of the MP40 is constructed from polymer, which is perfectly appropriate to match the real MP40 with its Bakelite polymer lower receiver. Obviously, the modern polymers used on the AGM MP40 are a lot stronger than Bakelite, but the MP40 is available in Bakelite colouration if you want a replica that is more realistic for early MP40 SMGs.

Despite its legacy design, the grip and handguard of the MP40 are comfortable and well designed, with linear gripping texture across either side of the pistol grip, and at the front of the lower receiver in the "handguard" area.

To access the battery compartment of the MP40, the upper receiver will need to be removed. Thankfully, this is quite simple, requiring only that you remove the magazine, pull the disk on the bottom of the handguard down and hold it in place while you slide the upper forward and off the gun. With this done, the MP40 will be in two halves, with a Deans connector appearing at the rear of the gearbox, in the lower receiver.

We recommend a 7.4V 1300mAh LiPo for an easy fit and solid performance. To put the gun together again, take care not to trap any wiring between the receiver halves, pull and hold the disk on the handguard out, slide the upper and lower back together and release the disk to lock everything in place.

The real MP40 has been seen in the hands of various combatants throughout modern history. This means if you are planning a rebel/OPFOR loadout, the MP40 would be a good choice if you want to lean into the realism aspect, as these SMGs are still regularly seen in combat zones around the world.

If you are more of a reenactor, the MP40 would be a great choice for a German WW2-themed loadout, but would also work well for French Resistance and British SOE, as MP40s were regularly used by these groups due to their common 9x19mm pistol ammunition and prevalence amongst German occupying forces.

Unsurprisingly for a replica of a WW2-era firearm, this Airsoft gun's appearance can be described as 'vintage' but is still seen in the hands of rebel groups in conflict zones around the world, so could make a nice unique "OPFOR" or "freedom fighter" primary weapon for an interesting loadout. Drop your M4s and AKs, it's time to do things old school. Whether you're a reenactor or just a history fan, this is a brilliant addition to any Airsofter's arsenal.

Features

• Full metal construction
• Antique finish - Realistic aged look
• 14mm CW Male threaded barrel - Add an adapter and suppressor to upset purists!
• Semi-auto/Full-auto fire selector - Built into the charging handle, forward is semi, retracted is full
• On/Off switch at the base of the pistol grip - If it doesn't shoot, check the switch!
• Authentic Replica of Infamous WW2 Machine Pistol - Suitable for various WW2 loadouts
• Under-Folding stock - Press the button on the stock base to unfold
• Front and rear sling points - Front on the barrel, rear on the receiver
• Rear Sight Adjustable for Range - Two open sight notches to choose from
• Hooded Front Iron Sight - Protected against bumps
• Slider adjustable HOP-up unit - Tune the MP40 for different ammo weights
• Version 3 Gearbox - Unique motor cage & shell, otherwise TM compatible
• Gate X-ASR MOSFET Pre-installed - Protects your battery, improves efficiency & provides diagnostics
• Top wired - Deans battery connector
• Recommended battery: 7.4V 1300mAh LiPo
• Compatible with AGM MP40/STEN magazines:
  • 50rnd Low-cap magazine
  • 120rnd Mid-cap magazine
  • 300rnd High-cap magazine

Package Includes

• Specna Arms MP40 RETRO SMG AEG
  • 120rnd Mid-cap magazine