

- New & Improved Recoil
- Cuts Off When Out Of BBs
- Dummy Bullets Have Motion
The Mk46 Mod.0 Next Generation MK46 SAW (Squad Automatic Weapon) is the latest and greatest from Tokyo Marui, and offers their new and improved Mechanical Recoil System. Not only this, but the Dummy Bullets on the Belt will jiggle and bounce around as the Gun fires, and it will also stop firing once the last BB has left the Magazine for ultimate realism! If you've been holding off on a Support Gun because of the lack of realism, this puppy is here to change your mind.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK 3-5 day Standard
£6.95
From
Dispatched with 24hr UK mainland
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The fabled MK46 MOD.0 has finally landed, and we can certainly tell you it was worth the wait. Tokyo Marui are known for going all-out with their packaging, but this new offering really takes it to a new level. When you open the box, you are greeted with a neat box that contains the Magazine, Bipod, Dummy Bullets and Link. Underneath this is the MK46 itself, packaged inside its' own Soft Carry Case made from 1000 Denier Nylon. This Carry Case also includes a highly-coveted Tokyo Marui and MK46 MOD.0 Fabric Patch.
The MK46 MOD.0 is manufactured to the stunning standard that both the name sake and price tag can corroborate, being mainly made from Alloy but with an Aluminium Outer Barrel Assembly and Upper Receiver, as well as a CNC Aluminium Handguard and Receiver. The Pistol Grip and Stock are made from Polymer as per the real thing.
The end of the Gun features a 14mm CCW Thread which can be made use of to install Suppressors and Tracer Units, and the CNC Aluminium 20mm Railed Handguard will allow you to install all your accessories to the Numbered Rail Slots. The Upper Receiver features a 20mm Rail so that you can install Sights and Scopes, or whatever you feel like! An integrated Bipod makes taking up a position much easier, and will help you take stable, aimed shots, as well as sprinkling in a little extra immersion! The Barrel is easily removable, and aids in modularity of the Gun; the idea being that you can quickly shove a different length Barrel onto the Gun, depending on your needs.
The MK46 is built around a newly designed High Torque Gearbox that is ready to take the strain of the awesome Mechanic Blowback. This system is stated to deliver way more recoil that previous Tokyo Marui NGRS Guns, around 600g of force. The Mock Bullet Belt will also jiggle and rattle away as you fire, making it look as though they're being fed into the Gun. When you have shot the last round out of your Magazine, the Gun will stop firing, and won't fire again until a new Magazine is installed and the Bolt Release pressed (provided you're using NGRS Magazines). All this is fed by a 1000rnd Box Magazine which is powered by 3 x AAA Batteries, and fed by pouring BBs through a Fill Window. An integrated MOSFET protects the circuitry of the Gun, whilst also controlling such features as cutting off the Trigger when the Barrel Assembly is removed or the Feed Tray left open. It also has an LED indicator that displays current MOSFET and Battery status. An Adjustable HOP Unit can of course be found in the Gun by lifting up the Upper Receiver and Loading Tray, to access the Rotary Dial inside the unit.
If you're looking for the absolute peak of Airsoft Technology, something incredibly realistic that has had supreme attention paid to both the Internal and External Construction, as well as plenty of thought put into how the Gun will operate, then there really is no substitute for the Tokyo Marui MK46 MOD.0 Next Generation Recoil Shock LMG. If you know you know!
Features
- MK46 MOD.0 Replica
- Next Generation Recoil System
- New and Improved Recoil
- Recoil Delivers 600g of Force
- Mock Bullet Belt Motion
- Empty Magazine Cutoff
- No Barrel / Open Tray Cutoff
- Quick Release Outer Barrel
- Built-In MOSFET
- Luxurious 1000D Carry Case
- Very Neatly Presented
- 14mm CCW Thread
- CNC Aluminium 20mm Handguard
- 20mm Railed Receiver
- Numbered Rail Slots
- 1000rnd Capacity Box Magazine
- Functional Bolt Release
- Integrated Bipod System
- Adjustable HOP Unit
- Adjustable Ironsights
- Thumb-Through Safety
- Modular Weapon Platform
- Solid Fixed Stock
Package Includes
- Tokyo Marui MK46 MOD.0 Next Gen Recoil Shock LMG
- 1000rnd Box Magazine
- 11 x Dummy Cartridges
- 11 x Cartridge Links
- User Manual
- Bipod
- Tools
Special Instructions
The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.
Specification
General
Platform Type | Support Gun |
|---|---|
Over 18 | Yes |
Defence / UKARA Required | Yes, No, |
Included Items |
|
Skill Level | Advanced Player |
Warnings | Li-Po - Never Leave Charging Unattended Li-Po - Only Use Approved Chargers Li-Po - Charge in a Fire Safe Area |
Testing
FPS, using 0.20g BBs | Approx.280fps ± 10%, using 0.20g BBs |
|---|
Weight and Dimension
Weight (KG) | Approx.6.3KG |
|---|---|
Length (Extended) | 92cm |
Construction
Primary Colour | Black |
|---|---|
Pre Two-Tone | No |
Construction | CNC Aluminium receiver and handguard. Aluminium outer barrel and upper receiver. Polymer pistol grip and stock. |
Weapon Specific
Powered By | Electric |
|---|---|
Blowback Type | Electro Mechanical Blowback |
Platform | MK46 |
Fire modes | Full Automatic |
Safety Features | Trigger Lock |
Shooter Configuration | Right Handed |
Platform Configuration | Standard |
Platform Scale | 1:1 |
Suggested BB Weight | 0.25g |
Hop-Up
HOP-Up Adjuster Type | Gear |
|---|---|
HOP-Up Adjustment Location | Lift upper receiver / loading tray to access |
Furniture
Furniture |
|
|---|---|
Rail System | 20mm RIS / RAS |
Stock Type | Fixed |
Sight Type | Iron Sights |
Sling Options | Loop |
Barrel
Outer Barrel Thread Type | Male |
|---|---|
Outer Barrel Thread Direction | CCW (Counter Clockwise) |
Outer Barrel Thread Size | 14mm |
Inner Barrel Length | 326mm |
Magazine Specific
Magazine Type | AEG, High Capacity, Box Magazine, |
|---|---|
Magazine BB Capacity | Approx. 1000 Rounds |
Electric Gun Specific Information
Gearbox
Gearbox Wiring | Front Wired |
|---|
Motor
Motor Type | High Torque |
|---|
Battery Specific
Battery Connector | Mini Tamiya |
|---|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |








