VP Racing Battery 11.1v 1300mAh 25C LiPo Crane Stock Battery - Tamiya

VP Racing Battery
Code: LP304
  • 1300mAh
  • 11.1v 3S LiPo
  • Crane Battery

A super thin triple crane stock 11.1v 1300mAh 25C LiPo that features a standard Tamiya connector and is made up of three individual thin cells, making it great for squeezing into awkward spaces.

Full description

Charge this battery the right way...


Designed for use in either a solid or crane stock with side battery storage tubes, each row of cells are less than 1cm thick and can be used together or separately to be placed in irregularly shaped stocks and hand guards. The batteries can also be used in remote control Cars, Boats, Planes and other Toys, as well as in DIY Electronics projects.


  • 11.1v
  • 1300mAh
  • 3 x cells
  • Small Tamiya connector
  • 8cm cable
  • Approx. 9.8cm x 2.1cm x 2.4cm
  • 25c rating
  • High Powered battery for increasing motor rate
  • Can be placed in combined or separated to fit the required space

Package Includes

  • 11.1v 1300mAh 25C LiPo Crane Stock Battery - Tamiya
  • Instruction Manual

Special Instructions

Please note that we only recommend that this battery be used in Highly upgraded guns, and as such we cannot provide a warranty on any gun which has had an 11.1v battery used on it.

Please do not let the battery fully discharge before recharging, this will damage the battery, please use a LiPo Alarm to check the Charge of the Battery before use, and stop if the Rate of Fire Drops. To charge the battery you MUST use a Li-Po Battery Charger, as overcharging can cause damage to the unit.

Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure. 

Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be ore than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.

We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.



Product Length
Approx. 9.8cm
Product Height
Approx. 2.1cm
Product Width
Approx. 2.4cm
Patrol Base - Warning Icon
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Battery Specification

Battery Type
Battery Configuration
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Battery Voltage
Battery Amperage
Battery Discharge Rate
Battery Cell Count
Battery Cell Voltage
Battery Cell Height
Battery Wire Length

Size guide

Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.

Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.

If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.

We always recommend charging LiPos and other batteries in a charging bag.

If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.

Customer reviews

5 / 5
1 review for VP Racing Battery 11.1v 1300mAh 25C LiPo Crane Stock Battery - Tamiya
Trustpilot customer reviews
Ethan Briscoe
Written on 24/12/2022
perfect for my gun
Rated 5 out of 5