VP Racing Battery 11.1v 2600mAh 25C LiPo Crane Stock Battery

VP Racing Battery
Product code: LP306
£26.99
  • 2600mAh
  • 20c Rating
  • 11.1v 3S LiPo

A large 11.1v VP Racing 2600mAh LiPo with a small Tamiya connector designed for a full days Airsoft action with impressive rate of fire and single shot results.

Full description

Description

This battery is laid out in a crane stock configuration, meaning the individual cells are split. This makes the battery much easier to install in awkward spaces as you have much more freedom when trying to fit it. A 25c discharge rate allows for a steady and constant flow of power all day long, and providing a decent rate of fire and trigger response. The batteries can also be used in remote control Cars, Boats, Planes and other Toys, as well as in DIY Electronics projects.

11.1v 1300mAh 25C LiPo Crane Stock Battery Dimensions

Features:

  • 11.1v LiPo
  • 1300mAh capacity
  • 25c rating
  • 3 x cells
  • Approx. 9.5cm x 4cm x 1.9cm
  • 9cm cable
  • Crane stock configuration
  • High Powered battery for increasing motor rate

Package Includes:

  • 11.1v 2600mAh 25C LiPo Crane Stock Battery
  • Instruction Manual

Special Instructions:

Please ensure that your Airsoft weapon is built for 11.1v batteries. If your weapon is not rated for such a high voltage it can damage or break your weapon. Please check beforehand to avoid any damage.

When using your LiPo battery ensure that it does not fully discharge, otherwise you may damage or destroy your battery, if you feel that your rate of fire is decreasing then stop using your battery immediately. Battery levels can be checked by plugging a LiPo Alarm into your battery.

Safety Precautions:

Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure. 

Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be ore than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.

We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.

Specification

General

Product Length
Approx. 9.5cm
Product Height
Approx. 4cm
Product Width
Approx. 1.9cm
Patrol Base - Warning Icon
Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Battery Specification

Battery Type
Li-Po
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Battery Voltage
11.1V
Battery Amperage
2600mAh
Battery Discharge Rate
25
Battery Cell Count
3
Battery Cell Voltage
3.7V
Battery Cell Height
1.3cm
Battery Wire Length
9cm

Size guide

Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.

Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.

If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.

If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.