- 2 Pieces
- MOLLE Fittings
- Elastic Mag Retention
Two individual pouches that secure to any MOLLE compatible tactical gear, from rigs and vests, to drop leg panels or rucksack, allowing you to carry your spare magazines comfortably.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£5.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
Each pouch holds up to 2x magazines with the elastic retention loops seen in the photos to ensure a snug and secure fit. Please note, magazines pictured are not included. Each pouch also has a full front of additional MOLLE for your to stack up more pouches on its front face.
Features:
- 2 x Magazine pouches in total that hold 2 magazines per pouch (4 mags in total)
- MOLLE compatible
- Additional MOLLE front to stack up more pouches and accessories
- Elastic magazine retention loops
- Magazines are not included
Package Includes:
- Horizontal M4/M16/AR-15 Mag Pouch Set
Specification
General
|
Tactical Equipment Type
|
Pouch
|
|---|---|
 |
 |
 |
600D Polyester
|
|
Product Width
|
Approx. 16cm
|
Pouch Specific
 |
Magazine
|
|---|---|
 |
MOLLE
|
 |
Elastic, Press Stud,
|
 |
4x STANAG
|
 |
Yes
|
 |
Standard
|
You might also like
- Self Diagnostic
- Electronic Blowback
- Programmable Trigger
An incredibly intelligent and robust AR platform replica which offers CNC Machined externals, Electronic Blowback, the ICS SSS Self-Diagnostic System, Microswitch Trigger, Programmable 3rnd Burst, Pre-Cocking as well as a De-Tensioner Function on the safety.
- X-ASR MOSFET
- Quick Change Spring
- Fully Licensed Replica
A highly realistic replica of the instantly recognisable M4A4 platform, which features Zinc Aluminium externals, excellent internal parts, a quick change spring, GATE MOSFET and fully licensed, engraved trademarks.
- Adjustable Stock
- Compact Pistol Style
- Part of the SA Core Range
Based on the M4 / AR platform this rifle has been based off of the Stubby / Tanker compact M4 which were originally designed for use in vehicles and for concealed carry. This rifle has been lovingly crafted by Specna Arms to the highest quality, from top quality materials.
- MOSFET Inside
- Microswitch Trigger
- Quick Change Spring
The CM.623 is the perfect starter gun, coming bundled with a MOSFET, Quick Change Spring, Microswitch Trigger, included Battery & Charger and a reinforced Nylon Fibre body for an amazing price.
- Mechanical Recoil
- 14mm CCW Thread
- KeyMod Handguard
A seriously tough and good-looking AR/M4 platform replica which is powered by electric, features a KeyMod rail system complete with handstop and rail adaptor, and comes packaged with the Bolt Recoil Shock System for a hard-kicking mechanical recoil.
- Rotary HOP Unit
- Quick Change Spring
- Fully Licensed Design
A fully licensed and fully spec'd compact, electric-powered M4 replica which is perfect for CQB scenarios, and is more than happy to hold its' own on the outdoor fields too.
- Modular Handguard
- GATE X-ASR MOSFET
- Quick Change Spring
An electric powered Edge series replica from Specna Arms, complete with a full Aluminium/Zinc receiver and handguard and a GATE X-ASR MOSFET as standard.
- Based On The 416
- Pneumatic Blowback
- Four Point 20mm Rail
A Pneumatic Blowback Airsoft 6mm BB Gun AEG, designed to replicate the look of the H&K 416c, a weapon which fires 5.56mm NATO rounds and is used widely around the world due to its design and reliability.
- Three Round Burst
- Electronic Trigger Unit
- RIS/KeyMod Handguard
An electric powered M4 replica with an Alloy receiver, a programmable three round burst, electronic trigger unit for a sharper trigger response and an Alloy combination RIS/KeyMod handguard.
- 6.03mm Tightbore Barrel
- URX-3.1 Style Handguard W/ RIS
- SR-15 MOD.1 Replica 14.5" Barrel M4
A new 6mm electric airsoft rifle manufactured by NUPROL, designed as a replica of the 14.5 Barrelled KAC SR-15 MOD.1 assault rifle, complete with URX-3.1 RIS Railed Handguard, and is ideal for Airsofters looking for a Modular M4-type Airsoft gun.
- Four Point RIS Rail
- Polymer Construction
- Rear Sling Plate Fitted
An Airsoft 6mm BB Gun, based on the M4 / AR Platform, which is a great entry grade Beginner weapon for those looking to start playing Airsoft, or even simply Backyard Plinking.
- Electronic Trigger
- ARES EFCS Gearbox
- Positionable Rail Sections
A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.
- Electronic Trigger
- ARES EFCS Gearbox
- Positionable Rail Sections
A lightweight carbine length M4 AEG rifle. Comes with a 12'' metal rail perfect for attaching flashlights, lasers, PEQ box and any of your other accessories.
- Full Length AR
- Rotary HOP Unit
- Strong Recoil/Kick
An M4 platform electric powered replica which is fitted with Bolt's Mechanical Recoil System which provides a savage kick. It is also coupled with a Precision Inner Barrel, Rotary HOP Unit and a one-piece Outer Barrel Assembly for a rock-solid build.
Similarly matched Colours
- For M4/M16 Stocks
- For 'Last Stand' Heroic Moments
- Holds STANAG 5.56mm Magazine
A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.
- Rip-Stop Polycotton
- Removable Elbow Pad
- Velcro Shoulder Pocket
A lightweight and breathable top, which is Viper Tactical's version of UBACS, known as Under Body Armour Combat Shirt, designed to keep the wearer comfortable and cool.
- Apply Patches
- Velcro Pockets
- Comfortable Design
A heavyweight T-Shirt designed to be as practical as it is comfortable. The shirt comes with two Velcro secured arm pockets, allowing you to keep small objects at arms reach.
- 100% Polyester
- Ideal For Airsofting
- Lightweight & Warm
A 100% polyester hoodie designed for keeping warm and comfortable when outdoors, that's also suitable for wearing under a chest rig while Airsofting.
- Ventilated Top
- Adjustable Draw String
- Vegetation / Camouflage Loops
A simple and lightweight hat with wide brim, designed to protect the back of your neck and forehead from getting too much sun.
- Stretchy Material
- Rip-Stop Polycotton
- Removable Knee Pads
A pair of tough, comfortable trousers made from a rip-stop material which has all the same features of a very popular real-world set, at a fraction of the price.
- Retention Loops
- For G36 Magazine
- MOLLE Compatible
A MOLLE compatible double G36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR G36 Airsoft magazines.
- 6 Pockets
- Rip-Stop Polycotton
- Integrated Knee Pads
Designed for optimum comfort in high intensity physical activity, these trousers possess a range features to enhance their practicality.
- Heavy Duty Pouch
- Front MOLLE Loops
- 25cm x 8.5cm x 13cm
A large sized Utility Pouch, designed for storing spare parts and other items, such as batteries, notepads, pens, tools or even quick detach sights.
- 3 x M4 Magazines
- 2 x Pistol Magazines
- Further Pouches Can Be Added
The perfect solution for the Airsofter who is trying to build a compact rig, or rapidly running out of space on their current set up.
- One Size Fits All
- Elasticated Ghillie Loops
- Adjustable Waist Restraints
One of, if not the most compact ghillie system out there! A must-have for any sneaky shooter looking to get the drop on an enemy target without overheating.
- 24kN Buckle
- Fits Up To 46"
- One Hand Release
A seriously tough belt made from 100% Nylon, and featuring a heavy duty clasp that can withstand up to 24kN (kilonewtons) of load.