Airsoft Magazines

If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

If you have an M4 with a rapid rate of fire, these magazines can easily keep up! The TPM-AR is one of the latest enhanced magazines from PTS Syndicate, a brand well known for its premium magazines. The TPM-AR is compatible with practically any M4 AEG and is styled after the iconic design seen everywhere in Airsoft. This magazine is a spring-fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

This new addition comes with an included MagPod, constructed from a durable 15% Glass Fibre reinforced PA6. This will protect the bottom of your magazines in case of any accidental drops.

Whether you're working on a GBBR DMR or you're running a historically accurate Vietnam primary, the CYMA 20rnd Green Gas VN Magazine for MWS/CGS GBBRs belongs in your rig! Made with a steel shell and polymer internals, this mag is far shorter than the standard AR mag, meaning you can keep your primary compact and get lower in the prone position.

Designed for CYMA's CGS GBBRs but also compatible with TM ZET System M4/AR-15 GBBRs, this short mag replicates the early issue 20-round M16 magazine first used in the Vietnam War but also found paired with MK12 SPR rifles in more recent history.

The fill valve is on the rear of the magazine body and must be facing upwards to fill with gas. Loading is carried out through the feed lips on the top. We recommend a speed loader with a GBB adapter to load this mag, as the spring is quite stiff.

If you're rocking a VMP-2 but need better rapid fire performance and accuracy, the Airtac HPA Adapter for VMP-2; MP5 AEG Magazines is a great start! A pre-assembled HPA magazine adapter designed to feed from standard MP5/SMG-5 AEG magazines, this set requires a US-spec airline, regulator, air bottle and bottle regulator to get started.

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. This adapter also increases magazine capacity with an MP5 mag on board, giving you more shots between reloads.

To install the adapter, modification to your VMP-2 is required, and tuning may be required to suit your specific MP5/SMG-5 AEG magazine design. See Airtac's Website for more information. Whether your VMP-2 is cutting corners at kissing distance or reaching out in a woodland environment, converting it for HPA pushes performance up to the next level!

If you want to get the most out of your MK23, SSX23 or SSX303, the Airtac HPA Adapter for MK23 NBB Pistol; CYMA Shotgun Shell is the key. Designed for the ASG/STTI MK23, along with the Novritsch SSX23 and SSX303, this adapter is designed for US-spec HPA setup, feeding from 30rnd shotgun shell magazines from either CYMA or Golden Eagle.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. This makes it a fantastic way to get the most out of NBB platforms, which are already whisper-quiet and honed for long-range shooting.

A shotgun shell adapter keeps your platform compact, allowing you to get low in the prone position and make optimal use of cover. It also keeps magazine capacity reasonable and sportsmanlike, which will hopefully allow you to run HPA at more restrictive sites, which often limit magazine capacity with HPA-tapped pistols and SMGs.

If you're running HPA at a site which limits mag capacity, the Airtac HPA Adapter for VMP-1 / VMP-2; CYMA Shotgun Shell is a fine choice! Designed for either the VMP-1 SMG or its rifle sibling, the VMP-2, this adapter is designed for US-spec HPA setup, feeding from 30rnd shotgun shell magazines from either CYMA or Golden Eagle.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. It also enhances cold-weather performance, meaning you can still run your VMP in winter, when all the green gas-fuelled VMPs are in hibernation.

A shotgun shell adapter keeps the VMP compact, allowing you to get low in the prone position and make optimal use of cover. It also keeps magazine capacity reasonable and sportsmanlike, which will hopefully allow you to run HPA at more restrictive sites, which often limit magazine capacity with HPA-tapped pistols and SMGs.

Please note: Tuning of the adapter for shell compatibility may be necessary due to the tolerance differences between shell manufacturers. 3 Different length feed tubes are included to allow for this.

If you're hitting the field with a VORSK VMP-1 but need better rapid fire performance, the Airtac HPA Adapter for VMP-1; MP5 AEG Magazines is a great option. A pre-assembled HPA magazine adapter designed to feed from standard MP5/SMG-5 AEG magazines, this set requires a US-spec airline, regulator, air bottle and bottle regulator to get started.

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. This adapter also increases magazine capacity with an MP5 mag on board, giving you more shots between reloads.

This adapter is a drop-in installation, but may require tuning to suit the specific MP5/SMG-5 AEG magazines you're using. Thankfully, the parts to tune are included in the set (see Airtac's Website for more details). If you want better rapid-fire accuracy, no cool-down and higher mag capacity from your VMP-1, this Airtac HPA Adapter is the key!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

A spare or replacement 20-round Airsoft magazine designed for use in both the RAVEN EU Series and WE Europe's G-Series of gas blowback Airsoft pistols.

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds.

If you're after STANAG-style mid-caps, Specna has just what you need! The Specna Arms 120rnd STANAG Mid-Cap Magazine M4/AR-15 AEGs boast a realistic steel shell and polymer internals with a steel feed spring, holding 120 BBs approximately. To load the mag, we recommend using a speed loader or loading tool; simply align your filled speed loader or loading tool with the feed/fill port and load her up! 

The benefit of mid-caps is their spring-loaded internals, feeding in the same way as a real magazine, which means no battle rattle to give you away. Compatibility-wise, this mag will work in most M4/AR-15, SCAR-L and L85 AEGs, along with other platforms which are M4 AEG mag-compatible. If your loadout requires steel STANAG-style magazines, the Specna Arms 120rnd STANAG Mid-Cap Magazine M4/AR-15 AEGs is the way to go

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!