Airsoft Grips & Stocks

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

An Aluminium Foregrip for 20mm Rails, which will install to any compatible Rail System and provide a solid platform to brace your rifle, and massively improve stability.

A compact and solid Foregrip for 20mm Rail Systems, which is constructed from CNC Aluminium and is based upon a Russian grip design that is most often seen on AK Platforms, but will provide a stable platform for aiming any Rifle that has a 20mm Rail.

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

If your primary is a SigAir MPX, MCX or has a 1913 Picatinny stock adapter you now have one more stock option thanks to Laylax! The Lightweight M4/AR-15 Stock Tube Adapter is designed to mount to a 1913/20mm Picatinny stock adapter or the built-in 1913 stock mount on the MPX and MCX platforms and provides a 6-position M4/AR-15 buffer tube constructed from aluminium, ready for any M4/AR-15 sliding stock you fancy. 

The buffer tube is machined to allow for wire routing in rear-wired setups and has a threaded rear cap to keep your battery well clear of dirt and debris. The main perk of this stock adapter is its remarkably low weight, tipping the scales at a mere 140g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock equipped AEG or GBBR this is perfect for the job!

A tough constructed Polymer Foregrip which is compact and provides a forward point to brace against your rifle and achieve more stable manipulation of the muzzle. It is easily installed to KeyMod rail systems by loosening the Allen Bolt on the underside, sliding the grip into place and securing the Bolt again.

A tough constructed Polymer Foregrip which is compact and provides a forward point to brace against your rifle and achieve more stable manipulation of the muzzle. It is easily installed to KeyMod rail systems by loosening the Allen Bolt on the underside, sliding the grip into place and securing the Bolt again.

A tough constructed Polymer Foregrip which is compact and provides a forward point to brace against your rifle and achieve more stable manipulation of the muzzle. It is easily installed to KeyMod rail systems by loosening the Allen Bolt on the underside, sliding the grip into place and securing the Bolt again.

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

A rubberised vertical foregrip for Airsoft replicas with a 20mm rail, offering stability and a comfortable platform to brace your rifle.

If you're looking for a replacement for your APS AK's folding stock button you are in luck! The APS AK Folding Stock button is designed for the APS AKS-74 AEG series and is a 1:1 replacement part made by APS themselves. The button includes the latch to hold the stock in the deployed position and is constructed from alloy with a steel spring. 

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offers their AUG folding vertical grip as a spare part! The grip is constructed from high-strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

This one's for all you AK lovers looking to treat your rifle to a new receiver and stock. Constructed entirely from durable steel, this will undoubtedly give you AK a nice sturdy feel with a good weight balance. The stock itself is skeletonised to keep the weight balance and to allow it to fold into the receiver and lock in place with a latch.

The receiver has all the hallmarks of a classic AK body, with its signature level style mag release and angular trigger guard and is even complete with the iconic AK dovetail side mount, to which you can attach the tactical accessories of your choice.

Whether your looking to spruce up your AK47 with a new receiver and folding stock, or fancy creating some Frankenstein's monster of a rifle by attaching this to a non Russian rifle (we won't judge), this solid piece of gear is a great buy at the price.

Like your KRISS Vector, but find the stock options are a little bit limiting? Expand your horizons with this Laylax M4 stock base! The stock base retains the best parts of the original Kriss Vector design as well as the Alpine limited edition with an M4 buffer tube and stock. This allows you to install any solid M4 stocks that fit on a buffer tube, so you can integrate your favourite M4 stock on your Vector, or even swap them out, depending on the mission at hand, or to switch up your playstyle.

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

This slim profile Stock is designed for AR / M4 platform Airsoft Electric Guns, and will attach to any kind of AEG Buffer Tube. There is no dedicated Battery Compartment on this Stock, so you will need to fit your Battery inside the Buffer Tube of your gun. The Rubber Butt Pad is removable to make Battery installation easier; simply pull back the tiny tab on the underside and pull the Pad downwards.

If you want the slickest KRISS® Vector around, this stock adapter is a great start! This Laylax 1913/20mm Picatinny Stock Interface is compatible with both the KRYTAC KRISS® Vector AEG and GBB, allowing you to fit any 1913/20mm Picatinny stock you need to complete your mission. The interface is constructed from CNC machined aluminium with steel bolts to secure it and features a QD sling socket on each side, ready for QD sling swivels. 

The wealth of 1913/20mm Picatinny stock options expands with each passing day. If you want access to all the latest stock options to hit the market for your Vector, this is the best way to do it!

A Tactical Foregrip designed to fit onto your Assault Rifle and provide a secure and stable handling surface. The grip slips straight onto a 20mm rail and features a pistol grip style shape.

If you are looking for a grip to stipple for that custom Hi-capa GBB look, CowCow can provide the blank canvas you need! The Custom Pistol Grip is constructed from high-density polymer and features smooth, gripless sides which are perfect for the addition of grip tape or a custom stipple job. The backstrap of the grip features the standard pyramidal checkering pattern found on most original Hi-capa grips. Moulded as part of the grip we can see a magazine well flare, intended to assist you in carrying out smooth and effortless reloads. The trigger guard also includes a support hand undercut, allowing you to take a high grip on your Hi-capa for more effective recoil control.

A spare or replacement standard M4 type stock for Airsoft M4/M16/AR-15 AEGs with an AEG type buffer tube.

If your TM SCAR has developed a wobbly stock, or you are worried that it may do in the future, this is the part you need to sort it out! Introducing the Hard Stock Button from Laylax, a replacement for the original stock locking/folding button on the Tokyo Marui SCAR-L and SCAR-H Next generation recoil shock AEGs. The button is constructed from reinforced polymer, providing additional strength over the original stock button, guaranteeing reliable stock locking and eliminating wobble. The set also includes the stock button spring. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

If you are in the process of adding some custom flair to your AAP-01, this part may be of interest to you! Introducing the Action Army Thumb Stopper for the AAP-01 Assassin GBB pistol, a "Gas Pedal" style thumb stop constructed from aluminium using CNC processes. This part is intended to provide additional recoil control and encourage a consistent grip by giving your thumb a place to rest, and letting you apply downforce to the muzzle to keep those full auto bursts under control!

For those who want to take your KRISS Vector to the absolute max, Laylax has the addon, or addons for you! This package includes both a foregrip/magwell attachment and a forward finger guard, both constructed of lightweight, high-density polymer.

On the front and rear panels of the magwell grip and foregrip, we can see ridged textures to aid with grip and comp0lement the Vector's modern aesthetic. Likewise the sides of the foregrip feature something of stippled texture similar to the pistol grip of the Vector. All the inner edges are curved, with the foregrip having an ergonomic design that feels perfect between your thumb and palm.

Take your Vector to the edge, from an ultra-modern SMG to an advanced PDW!

If you fancy the competition shooter look for your Hi-capa GBB but your palms get a bit sweaty even thinking about handling a soldering iron and stippling your pistol grip, this set of pre-cut grip tape will suit your needs perfectly! The package includes two self-adhesive grip tape panels, cut to conform to the shape of the Hi-capa grips, wrapping around the front strap and sides. Each panel offers a different level of coarseness, allowing you to choose the most comfortable and effective grip tape panel for you.

An Ergonomic Pistol Grip for M4/M16/AR Platform Airsoft Electric Guns, which will provide a far more comfortable grip than traditional Pistol Grips. It is easy to install, and simply needs the removal of your original Pistol Grip to fit it, by re-installing the screws that secure it to your Gearbox. The Grip includes a Quick Release Motor Baseplate that also has an integrated Motor Height Adjustment. If you want to customise your AR Platform Airsoft Gun, then this is a great place to start.