- 3 Round Burst Mode
- 2020 Revision Edition
- Polymer Construction
An Airsoft 6mm BB Gun, designed from the official specs of the CZ Scorpion Evo created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. This edition of the weapon is the 2020 revision, which features upgraded, rebuilt and more streamlined parts for better operation.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Gun features a Full Polymer Construction, with Alloy Charging Handle, Flash Hider, Outer Barrel and Internals, just like it's Real Steel counterpart and is even constructed from the same High Strength Polymer as the real thing.
The Handguard features a Four Point RIS Rail System, with the bottom rail allowing the attachments of Grips and Bipods, the Side rails can be used for Torches and Lasers, with the Top Rail lining up with the Receiver Length Top Rail to provide a full length Top Rail for attaching even the largest Sights, Scopes and Magnifier Setups. The battery is stored in the top of the receiver which is accessible once the Front Railed Handguard is removed.
The weapon features a multitude of advanced features, which are made possible by the internal MOSFET which has been custom designed for the Scorpion, which allows for a Safe / Semi / Three Round Burst / Full Auto Fire selector. The weapon also features an Electronic Trigger for an instantaneous response, and Mag Empty Detection which prevents the weapon from firing when you run out of ammo.
The Gearbox also features a Quick Change Spring System allowing you to change the FPS of your weapon quickly for the Game Site you are playing at.
The weapon is fully supported by ASG's design team, allowing a variety of unique and interesting aftermarket parts to be developed, meaning something new and interesting is always being release.
This is the perfect purchase for any Airsoft Skirmisher who is looking for the ultimate CQB weapon, which not only performs well in CQB scenarios, but will outperform most weapons in Outdoor engagements also.
Features
- EU Sub 350FPS Variant
- Steel Plate Enhanced Spring Guide
- Quick spring change Design
- Internal Error Detecting MOSFET Computer System
- Electronic trigger
- Folding Stock
- Full length top rail
- Side and bottom rails
- Three round burst capability
- Mag empty detection which stops firing when Magazine is empty
- Functional Bolt Lock
- Removable Sliding Stock
- Reduce BB loss hop unit
- Functional charging handle
- Ambidextrous design
- Fast reload
- Battery monitoring
- Failure detection
- Crisp electronic trigger response
- CNC machined outer barrel
- Built entirely in Europe
- Forward sling mount can be switched to either side
- Constructed from the same high-strength mil-spec polymer as the real steel weapon
- Front Wired Alloy V2 Parts Compatible Gearbox
- Pre-fitted with Deans battery connectors
- Adjustable Hop Up unit for increased Range and Accuracy
Package Includes
- CZ Scorpio Evo 3 A1 2020 Revision
- 75rnd Mid Cap Magazine
- User Manual
- Ironsights
EVO 2020 Revision Features
Performance Upgrades
Parts have been tweaked and tolerances improved to allow the replica to perform better.
Deans Battery Connector Upgrade
The mini-tamiya connector has been replaced with a higher quality Deans connector, for a better and more secure connection.
EVO 2018 Revision Features
Revised Gearbox Design
A re-imagined gearbox based upon the original design, but with plenty of new features designed to make the gearbox more reliable.
New gearbox manufacturing process
The gearbox is now cast from metal with a CNC finish process for a precision finish for maximum performance.
CNC machined gearbox selector plate guides
Because of the use of the CNC finishing process the guides are smoother for better movement of the selector plate.
New Zinc-based alloy gearbox
The gearbox are now made from stronger Zinc instead of Aluminium alloy, making them stronger and more durable.
Heavier gearbox design
The increased weight of the gearbox results in a more realistic weight and a better / deeper muzzle report.
Simplified Gearbox Casting
The gearbox casting process has been simplified to help protect against gearbox cracking by reducing imperfections.
Increased gearbox bracing
More contact surface points have been added to the gearbox to increase it's structural stability, making the rifle more rigid and robust.
Improved Cable Routing
Redesigned to reduce wear and tear by allowing the wires to flow better, making it easier to replace wiring should it be needed.
Gears repositioned
The gears have been moved slightly closer together to improve contact and meshing between the individual gears.
Sector gear position adjusted
The sector gear now sits closer to the piston to improve its lifespan and reduce wear and tear.
Revised Piston design
The gearbox features ASG latest piston design which now features six metal teeth, with the second tooth removed for smoother engagements.
Revised steel cylinder
The weapon now includes a revised steel cylinder to improve the overall performance with a better air seal.
Cupped / Flanged Piston Head
ASG's latest piston head is included to improve performance and is cushioned to reduce impact on the gearbox.
Special Instructions
2020 Revision Notes
This version of the Evo features slight tolerance changes to improve performance, as well as replacing the mini-tamiya battery connector with a higher quality deans connector.
2018 Revision Notes
Please note that the new cylinder set is compatible with other 3rd party Version 2 and Version 3 (M4/AK/G36) gearbox. All 2018 Revision specification parts are 100% inter-compatible with previous revisions.
Suppressor Attachment
To attach a suppressor you must purchase an 18mm to 14mm adaptor which are sold separately.
Battery Insertion
To insert the battery first unscrew the two flash hider, the hand guard can then be slid forward. Please ensure that you hold the charging handle as it is spring ejected, as well as the forward sling mount point. When refitting the hand guard ensure the charging handle is placed in first, with the short end going in first. The charging handle is ambidextrous, and can be on either side, however we recommend the handle is on the opposite side of your trigger finger.
Specification
General
 |
Submachine Gun
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 318fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Regular Player
|
 |
Scorpion Evo - No 11.1v
|
Weight and Dimension
 |
Approx. 2.4kg
|
|---|---|
 |
42.5cm
|
 |
62.3cm
|
Construction
 |
Black,
Flat Dark Earth,
Battleship Grey,
|
|---|---|
|
|
Black
|
 |
No
|
 |
Polymer Hand guard, Receiver, Stock, and Magazine, just like the real thing, with Alloy Internals
|
|
|
Polymer
Alloy
|
 |
Polymer
Alloy
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
EVO 3A1
|
 |
CZ Scorpion Evo
|
 |
    |
 |
Trigger Lock
|
 |
Ambidextrous
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Gear
|
 |
Adjustable behind dust cover
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS
|
 |
Multi-Position , Folding ,
|
|
|
5 Position
|
 |
Open Iron Sight
|
 |
Handguard , Lanyard Loop, Receiver ,
|
Barrel
 |
Male
|
|---|---|
 |
CCW (Counter Clockwise)
|
 |
18mm
|
 |
208mm
|
Magazine Specific
 |
Medium Capacity , Spring Loaded, AEG,
|
|---|---|
 |
Approx. 75 Rounds
|
 |
Speed Loader
|
 |
Top
|
Electric Gun Specific Information
Gearbox
 |
Front Wired
|
|---|---|
 |
Yes
|
 |
Yes
|
 |
No
|
Battery Specific
 |
 |
|---|
Suggested Battery
 |
Li-Po
|
|---|---|
 |
Stick
|
 |
7.4v
|
Product Testing Data
 |
Using 0.20g BB
|
|---|---|
|
|
Blaster 0.2g BBs
|
|
|
31/07/18
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Customer reviews
Need ideas for something extra?
- 3MOA Target Dot
- Special VE Warranty
- Super Clear Sight Picture
An ULTRA compact, Full Metal 20mm / Pistol Weaver red dot sight designed for use on pistols / short dots & LPVO's as an RMR or as a back up sight. It has a 3MOA target dot and auto adjusting brightness levels according to your environment lighting.
This product is covered by the Vector Optics Lifetime warranty, for more information please read below.
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- Screw Top Lid
- 3300 x 0.25g BBs
- 0.01mm Tolerance
A screw-top bottle that contains 3300 high quality, competition-grade 0.25g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.25g BBs are a great option for those playing outdoors, particularly if you have a high speed gun and want to keep overall BB costs down whilst maintaining top-tier performance.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Slide Forward to Open
- Available in Multiple Sizes
- 40mm MOSCART Launcher
Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Steel Gear Set
- Ready Mag System
- Quick Change Spring
The LT-15 Gen 2 Alpha Stock is a rather unique looking M4 Platform Airsoft Electric Gun that features an awesome Ready-Mag System Stock, as seen on the Needletail Series. This is a great opportunity to get an AEG with awesome internal components, handy features like a Quick Change Spring and the super cool Alpha Stock, without having to drop the £200+ on the Needletail Series.
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- TM AWS Compatible
- AirsoftPro Compatible
- Integrated Carry Handle
Russian rifle lovers rejoice! This replica of the lesser-seen SV-98 platform is a Bolt Action Spring Powered Sniper Rifle which is constructed to be compatible with TM AWS parts, as well as AirsoftPro parts. If you're looking for a Sniper Rifle which is highly upgradeable and different from the norm, you just found it.
- 3 x Magazines
- Consistent Rifle
- Solid Construction
A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the weapon a slight recoil for enhanced realism.
- Adjustable Stock
- Rear Flip-Up Ironsight
- Part of the SA Core Range
Based off the rifle length M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms as part of their CORE beginner rifles range.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- Full Alloy Design
- High Quality Finish
- Gas Blowback Pistol
A high quality, faithful, Airsoft 6mm BB replica of the Colt 1911A World War 2 (WWII) .45 ACP Pistol. This highly detailed piece really stands out from the crowd with the satisfying recoil and loud report when it fires.
- Fiberglass Polymer
- 14mm CCW Thread
- KeyMod Handguard
G&G have added yet another masterpiece to their infallible Combat Machine series, which features an 8.5" KeyMod Rail System, 14mm CCW Thread, Flip Up Ironsights and a Sliding Crane Stock for Crane Stock style Batteries.
- Electric pistol
- Semi / Fully automatic
- 20mm RIS / RAS rail
Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.
The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.
- Compact CQB Weapon
- Rails for Sights and Accessories
- High Capacity M4 Magazine Adaptor
An Airsoft 6mm Airsoft AEG replica designed to look like the infamous P90, seen in many video games, TV series and Movies we all love (for the P90, of course!). This P90 is a bit of a special case, as it comes with a whopping 1500rnd box magazine/M4 high-cap adapter, allowing it to be fed using M4 AEG high-caps but with the added benefit of drum magazine-like capacity. If you are looking for a super small and mobile AEG with the ability to run all day long on a single magazine, or absolutely saturate the enemy team with 1500 BBs per fill, this is the AEG you need!