ASG CZ Scorpion Evo 3 A1 B.E.T Carbine

ASG
£295.99
Was £349.99
Save £54.00
  • Electronic Trigger
  • Carbine Length Evo
  • Amazing Build Quality

An Airsoft 6mm BB Gun, designed from the official specs of the CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark for their latest iteration of the Scorpion Evo.

Full description

Description

The Gun features a Full Polymer Construction, with Alloy Charging Handle, Flash Hider, Outer Barrel and Internals, just like it's Real Steel counterpart and is even constructed from the same High Strength Polymer as the real thing. The battery is stored in the top of the receiver which is accessible once the Front Railed Handguard is removed. The Handguard features a Top 20mm RIS / RAS Rail which lines up with the Receiver Length Top Rail to provide a full length Top Rail for attaching even the largest Sights, Scopes and Magnifier Setups. The Handguard also features M-LOK Handguard attachment points, allowing the attachment of M-LOK Rail Covers, Panels, Torches, Grips and much more. The weapon features a multitude of advanced features, which are made possible by the internal MOSFET which has been custom designed for the Scorpion, which allows for a Safe / Semi / Three Round Burst / Full Auto Fire selector. The weapon also features an Electronic Trigger for an instantaneous response, and Mag Empty Detection which prevents the weapon from firing when you run out of ammo. The Gearbox also features a Quick Change Spring System allowing you to change the FPS of your weapon quickly for the Game Site you are playing at. This iteration of the weapon also features improved internals to support the new longer 407mm 6.03mm Tight Bore inner barrel. The weapon features a Mock Suppressor, which is actually based on a the real version of the CZ Carbine in the USA where the barrel is widened to look like a Suppressor for those who want the look but not have to fill in the paperwork for an actual suppressor. The weapon is fully supported by ASG's design team, allowing a variety of unique and interesting aftermarket parts to be developed, meaning something new and interesting is always being release. This is the perfect purchase for any Airsoft Skirmisher who is looking for the ultimate outdoor weapon, which not only outperforms most weapons on the field, but also has the trigger response to beat them in CQB as well.

Features: 

  • EU Variant Sub 350FPS Build
  • Quick spring change design
  • Internal Error Detecting MOSFET Computer System
  • Electronic trigger
  • Folding stock which locks in place
  • Full length top rail for large Sight, Scope and Magnifier
  • Side and bottom M-LOK Rail Panel Sections
  • Six Bottom M-LOK Panels
  • Three Left, and Three Right M-LOK Panels
  • Larger Battery Storage Space
  • Three round burst capability
  • Mag empty detection which stops firing when magazine is empty
  • Functional Bolt Lock
  • Removable Sliding Stock
  • Reduce BB loss hop unit
  • Functional charging handle
  • Fast reload
  • Battery monitoring
  • Failure detection
  • Crisp electronic trigger response
  • CNC machined outer barrel
  • CNC Processed Gearbox
  • Quality Wiring
  • Built entirely in Europe
  • Receiver Forward sling mount can be switched to either side
  • Constructed from the same high-strength mil-spec polymer as the real steel weapon
  • Front Wired Alloy V2 Parts Compatible Gearbox
  • Adjustable Hop-Up unit for increased Range and Accuracy
  • 6.03mm 407mm Tightbore Barrel
  • Optimised internal components to handle the longer Inner Barrel
  • Integrated Mock Suppressor with Inner Barrel feeding through
  • Supports all of the Evo Attachments Range
  • Branded:
    • 'CZ SCORPION EVO 3 A1'
    • 'DESIGNED IN CZECH REPUBLIC'
    • 'WARNING ! READ MANUAL BEFORE USE'

Package Includes:

  • CZ Scorpion Evo 3 A1 B.E.T Carbine - Black
  • Ironsights
  • Magazine
  • User Manual

Special Instructions:

11.1v LiPo Warning

Please ensure that you do not use 11.1v Li-Po with any variant of Scorpion Evo without appropriate gearbox modification, as on Burst Fire or Full Auto this can over spin the gearbox causing pre-engagement of the gears, which can irreversibly damage the gearbox. We recommend the maximum of a 7.4v Li-Po.

Upgrades and Repairs

Should you need advice or information regarding the Scorpion Evo, or indeed any Airsoft Item, please feel free to get in contact with our ASG Certified Workshop Department by giving them a call on: 01484 644709.

Quick Change Spring

Please ensure that when removing the Gearbox Quick Release Spring Screw a standard Allen Key is used, as using a Ball Type Allen Key Head will damage the nut. 

LiPo Use If you use a LiPo please ensure it is removed after Skirmishes as the battery will be trickle drained over time breaking the battery.

Battery Insertion To insert the battery first unscrew the two flash hider, the hand guard can then be slid forward. Please ensure that you hold the charging handle as it is spring ejected, as well as the forward sling mount point. When refitting the hand guard ensure the charging handle is placed in first, with the short end going in first. The charging handle is ambidextrous, and can be on either side, however we recommend the handle is on the opposite side of your trigger finger.

Suppressor Attachment This variant of the rifle features a 14mm Clockwise Thread which allows you to attach Suppressors and Tracer units, however, to attach most Tracer Units you will first need to convert the thread to 14mm CCW (Counter Clockwise) using a thread adaptor which can be purchased separately.

Troubleshooting

The following is a short guide to troubleshooting your Scorpion Evo. The Electronic Control System in the Scorpion Evo can detect the following problems:

  • Low Battery
  • Short-Circuits
  • Mechanical Failures (Broken Gears etc.) 

In the event of a failure the Evo will sound two audible beeps and then stop functioning.

  1. 1. First, disconnect the battery.
  2. 2. Check the battery if the battery is fully charged or damaged, and then try another battery.
  3. 3. Check for short-circuits, looking for water penetration, if so, place the gun in a dry place and let it dry out.
  4. 4. Check the wiring for damaged or exposure.
  5. 5. Check for mechanical damages (This should be carried out by a skilled Airsoft Technician).

If the problem persists feel free to contact us on: 01484 644709 and ask for the Workshop.

If the gun does not sound any beep when connecting the battery or the gun stops functioning without sounding any beeps:

  1. 1. Check for disconnected motor plugs
  2. 2. Check for motor burn out

If no audible sounds are emitted this usually means there is a problem with the motor or its connection as the motor emits the sound.

Please note that it is safe to try reconnecting the battery several times as the Electronic Control System protects the gun from surge and spikes.


Specification

General

Weapon Construction External
Weapon Type
Submachine Gun
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 303fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Screwdriver Icon
Pre-Built
Yes
Package
Included Items
  • Magazine
  • Instruction Manual
  • Ironsight Set
Skill Level Icon
User Skill Level
Regular Player
Patrol Base - Warning Icon
Warnings
Evo Long Battery Warning - Do not use 11.1V Batteries, Max 7.4V

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.52kg
Weapon Length Collapsed
Length (Collapsed)
82cm
Weapon Length Extended
Length (Extended)
87cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Two Tone Icon
Pre Two-Toned
No
Construction Icon
Construction
Full Polymer Construction, with Alloy Charging Handle and Outer Barrel Assembly
Weapon Construction External
External Construction
Polymer
Alloy
Gearbox Icon
Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
Powered By
Electric
Blowback Icon
Blowback
None
Weapon Platform
EVO 3A1
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Patrol Base | Burst
Burst
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Ambidextrous
Weapon Configuration Icon
Weapon Configuration
Standard
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.2g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Rotary
Hop-Up Unit Location Icon
Hop-Up Location
Adjustable behind dust cover

Furniture

Rail System Icon
Rail System
20mm RIS / RAS
Icon Stock Positions
Stock Setting
Multi-Position , Folding ,
Sight Type Icon
Sight Type
Light Enhancing Open Iron Sights
Sling Plate Icon
Sling Options
Stock

Barrel

Icon Thread Type
Outer Barrel Thread Type
Male
Icon Thread Direction
Outer Barrel Thread Direction
CCW (Counter Clockwise)
Outer Barrel Thread Size
18mm
Inner Barrel Diameter
3mm
Inner Barrel Length
407mm

Magazine Specific

Magazine Type
Medium Capacity , Spring Loaded, AEG,
Magazine BB Capacity
Approx. 75 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Spring Change Icon
Gearbox Quick Change Spring
Yes
Digital Trigger Icon
Gearbox Electronic Trigger
Yes
Split Gearbox Icon
Split Gearbox Design
No
Motor
Airsoft Motor Icon
Motor Type
Standard
Battery Specific
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Suggested Battery
Suggested Battery Type
Li-Po
Suggested Battery Configuration
Stick
Suggested Battery Voltage
7.4v

Product Testing Data

Notepad Icon
Test Description
Using 0.20g BB
Notepad Icon
Test Date
01/04/17

Take this Airsoft gun to the next level!

Like this Airsoft Gun? Check out these awesome Products!