CYMA Sport Gen.2 CM.028 AK-47 Classic AEG

Quick Start Guide

• Charge your Battery: We recommend a 7.4V 1500mAh LiPo battery and a LiPo Balance Charger for this product. Place your battery inside your Battery Safe Charging Bag. Next, plug your charger into a 3-Plug UK wall socket and connect the Balance connector(small white plug) of your battery to the one on your battery. Your charger will cut off when your battery reaches capacity, but you should never leave it on charge unattended. Please note, this package does NOT include a battery or charger.
• Load your magazine: Open the feed hatch on the top of your High-cap magazine. Pour BBs in until full.
• Wind your magazine: Wind the wheel on the bottom of your magazine 5-10 times or until the noise changes and the wheel becomes firm.
• Put on your Eye Protection: Safety when using Airsoft guns should be your number 1 priority. Always wear eye protection before loading your AEG and ensure any spectators are also protected.
• Connect your battery: Remove the butt plate from your stock by pushing the butt plate down, then lifting it free. Inside, you'll find the Deans connector. Position your battery inside the stock, then connect the Deans connectors. With your wiring neatly tucked in, replace the butt plate.
• Insert your magazine: With the fire selector switch set to "SAFE" and the barrel pointed in a safe direction with your finger off the trigger, insert your magazine by indexing the front of the magazine first, then rocking the rear up to lock. See our Video: How to Load an AK if you're struggling.
• You're now ready to shoot! - Never shoot at animals or humans who aren't in an Airsoft skirmish

About the CYMA Sport Gen.2 CM.028 AK-47 Classic AEG

If you're a fan of the OG AK look, the CM.028 is a fine choice! Made with a mix of steel, alloy and high-density polymer parts, this build gives you a hefty, authentic experience and competitive performance without being overburdening for younger skirmishers or those who prefer to fight easy!

At the front, we have a fixed front sight post made from alloy, mounted to the steel outer barrel. Having a steel barrel keeps weight distribution realistic without being overburdening, perfect for those who like to move fast but experience realistic handling.

The tip of the barrel features a thread protector which perfectly matches the real AK-47 muzzle nut. If you unscrew this, you'll find 14mm CCW male barrel threading, ready to be kitted out with a tracer or suppressor. Below the front sight, we have a mock cleaning rod made from alloy, an important part of the iconic AK-47 silhouette. Above the cleaning rod, the barrel features realistic ribs, perfectly matching the real AK-47.

Moving back, we can find the mock gas tube and gas block, both perfectly replicating the shape of the real AK-47 Type 3, made from alloy with a contrasting gunmetal grey finish. On the left side of the gas block, we are equipped with a steel sling loop, which can be paired with the sling loop on the stock to mount a two-point sling. Its steel construction ensures the loop will never fail, no matter how rough you are with it!

Next up, we reach the faux wood handguards, perfectly matching the real AK-47 in shape and layout, complete with 2 cooling ports on each side. The faux wood effect looks great, even up close. Its varied wood grain effect completes the iconic AK look, and being made from polymer means it will still look great in the long term.

Behind the upper handguard, we have what is known as the "trunnion block". This is where the rear iron sight mounts, and in the real steel, this is where the barrel connects to the receiver.

The rear sight is known as a "tangent" sight, and can be adjusted to suit different engagement ranges by holding the drum on the left side down, and sliding the drum back and forth to raise and lower the rear notch. This sight style is fantastic for Airsoft, as its open-notch design makes it easy to track moving targets.

The receiver is made from high-density polymer, perfectly matching the shape and design of the original AK-47 Type 3 rifle. The charging handle is on the right side, affixed to the alloy mock bolt carrier. This can be pulled back for a satisfying "clack", but if you pull it back and hold it in place, you can access the Slider adjustable HOP-up.

The adjustable HOP-up lets you vary the amount of backspin applied to your BBs to extend range and allow for heavier ammo to be used. To increase the HOP-up effect, simply move the slider rearwards. Returning the slider to the front will reduce the HOP-up to its lowest setting. We recommend 0.25g BBs, as they are great for both indoor and outdoor gameplay.

On the right side, we can find the fire selector switch, which doubles as a dust cover when in the uppermost "safe" position. The fire mode positions are laid out in the same way as the real steel AK-47: with safe at the top, fully automatic in the middle and semi-automatic at the bottom.

The fire selector is made from steel for added strength on this often-used component. The fire selector markings are moulded into the receiver, with authentic Russian Cyrillic letters denoting each mode.

On the bottom of the receiver, we come to the trigger guard/magazine release assembly, offering a centrally positioned mag catch which is easy to access from either side. This means you can easily reload whether you're left or right-handed, with no special tricks needed. This entire assembly is made from stamped steel, enhancing realism and strength.

The magazine insertion method for the AK is the "rock and lock" method, meaning you'll need to index the hook on the front of the mag in the receiver, then rock the rear back to meet the magazine catch and lock into place. If you're struggling, check out our PBTV Video: How to Load an Airsoft AK.

Behind the trigger guard, we can find the pistol grip of the AK-47, made from high-density polymer with the same fantastic imitation wood finish as the handguards. This is a perfect match for the real AK-47 Type 3 build, as this was one of the few AK variants issued with a wood pistol grip.

Above the receiver, we have what is known as the "receiver top cover", made from stamped steel. This part covers the action of the real AK and prevents dirt and debris ingress, and the smooth design of the top cover is a perfect match for the real AK-47 Type 3. Its steel construction adds the cold feeling of metal to the receiver section, a big realism boost.

At the rear, we have a fixed stock made from polymer with a fantastic faux wood effect and a steel butt plate. On the left side of the stock, we are equipped with a steel sling point, ready for a two-point sling when paired with the front sling point on the left side of the handguard.

Features

• Alloy/steel/polymer build - Heavier and more realistic than the CM.52x series
• 6.05mm Tightbore inner barrel - Superb accuracy potential
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
• AK-47-style thread protector/muzzle nut - Covers the threads for a realistic look
• Steel outer barrel - Provides realistic weight distribution & feel
• Mock cleaning rod - Completes the iconic AK-47 silhouette
• Sling points front & rear - Ready for a two-point sling, CYMA AK Sling recommended
• Adjustable tangent open iron sights - Press the drum on the left side to adjust for elevation
• Realistic AK-47 Type 3 gas block & tube - A perfect match for the real thing, alloy build
• Faux wood furniture - Classic AK looks, easy maintenance compared to real wood
• Ambidextrous magazine release - Ideal for left or right-handed shooters
• Moving metal charging handle - Rack it back for a satisfying "clank"
• Slider Adjustable  HOP-up Unit - Adjust the backspin applied to your BBs for better range
• 3-Position fire selector switch - SAFE - FULL AUTO - SEMI AUTO
• Rock & Lock magazine insertion method - If you're struggling, watch our PBTV Video: How to Load an Airsoft AK
• Rear wired: Battery compartment inside the Stock
• Deans battery connector - Recommended battery: 7.4V 1500mAh LiPo
• Fixed stock with steel butt plate - Detailed faux wood finish, sling loop on the left side
• 2 x 500rnd Steel High Capacity Magazines included - Plenty of firepower straight out of the box
• Version 3 Gearbox:
  • 18:1 Steel gears
  • 8mm Steel bushings
  • Reinforced polymer piston with aluminium inner sleeve
  • Reinforced polymer piston head
  • Reinforced polymer cylinder head
  • Type 0 cylinder
  • CYMA V3 MOSFET
• Compatible with AK-47/74 AEG magazines - Plenty of spare magazine options

Suggested accessories

• Spare Magazines: Mid-cap Magazine [VIDEO] | High-cap Magazine [VIDEO] | Electric High-Cap Magazine
• 20mm Picatinny railed handguard: CYMA 20mm Picatinny Railed Handguard for AK AEG
• Slings: CYMA AK/SVD Rifle Sling | 8Fields Padded Two-Point Rifle Sling
• Suppressors: 5KU Russian-style PBS-1 Suppressor | Specna Arms Covert Tactical Suppressor
• Tracer Units: Acetech Raider Bifrost Tracer Unit | HASTA Nebula Gen.2 Mist Tracer

Package Includes

• CYMA Sport Gen.2 CM.028S AK-47S Underfolder AEG
  • 2 x 500rnd High-capacity magazines