Delta Armory DA-C12 CHARLIE™ AK-47 AEG; Classic

If you're into the AK aesthetic and seek an affordable replica, the Delta Armory DA-C12 CHARLIE™ AK-47 AEG; Classic is one to watch. Made primarily from high density polymer with an alloy outer barrel and steel trim parts, the DA-C12 is rocking the original AK look with its detailed faux wood furniture and "Type 3 Milled" receiver, complete with mock rivets and all the details a collector will love!

Inside, the DA-C12 is equipped with an alloy version 3 gearbox with 18:1 ratio steel gears and a quick-change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy slider HOP-up unit, offering excellent accuracy with high-quality ammo and the ability to tune the trajectory for different ammo weights and extend max range. All internal parts are Tokyo Marui-spec, meaning aftermarket upgrades are a go for this AK-47, ideal for the techy types and performance seekers!

Whether you need a low-cost AK-47 replica for your OPFOR loadout or you love the iconic AK-47 aesthetic and need one for the collection, you'll be in good hands with the Delta Armory DA-C12 CHARLIE™ AK-47 AEG; Classic! A fantastic AK replica without the excessive weight of full metal models, this AK-47 AEG will keep your agility high with authentic looks as a bonus!

Starting at the front, we can find a polymer thread protector concealing 14mm CCW male threading at the tip of the alloy outer barrel. The thread protector is a dead-on match for the protector used on the real steel AK-47 Type 3 but if you're going for a stealthy loadout or want to really light the enemy up, it can be swapped out for any 14mm CCW compatible tracer unit or suppressor. To remove the thread protector, simply hold the detent pin on the front of the front iron sight in, after which it can be unscrewed.

Next up, we can find the front iron sight which is the correct design for an AK-47 Type 3, something collectors will definitely appreciate! The front sight is mounted to the tip of the outer barrel and is a perfect match for the real AK-47; a fine front sight post protected on each side with protective wings. Just below, we are treated to a mock cleaning rod made from steel, an iconic part of the classic AK-47 silhouette.

Moving rearwards, we come to the dummy gas block and gas tube, which are realistically styled after the original AK-47 production variant, the Type 3. The gas tube and block are made from polymer and include mock vents and an alloy sling loop mounted to the barrel on the left side which is designed for "hook" type slings and can be paired with the sling point on the receiver to mount a two-point sling.

Following the gas tube, we come to the handguards which are the classic AK-47 design with two vent ports on each side with a slight bulge towards the rear to aid recoil control. These handguards are made from high density polymer with an extremely convincing faux wood finish with a deep, varied and realistic wood grain design. While faux wood might not have the authentic feel of the real stuff, it is far easier to maintain, lighter and less prone to visible damage. If you plan to upgrade to real wood in the future, you'll be happy to learn that the DA-C12 is compatible with Tokyo Marui spec AK-47 wood kits but may need modification to accept LCT or VFC style wood kits.

Between the handguards and receiver, we can find the trunnion block, providing the mounting point for the DA-C12's adjustable tangent rear sight. The rear sight can be adjusted for different ranges using the slider attached to the sight itself, without using any tools. Simply hold the button on the right side of the rear sight to slide it back and forth and adjust for different engagement ranges. This sight is an open sight, allowing you to track fast-moving, close-range targets more effectively than an enclosed aperture sight. On the right side of the trunnion block, we also have the mock disassembly lever which doesn't function but is included to provide the details an authentic AK-47 replica needs to be complete!

The receiver of the DA-C12 is constructed from high density polymer, with a textured matt black finish, boasting the same superb quality polymer used on Delta Armory's other CHARLIE™ line replicas. The left side of the receiver features realistic mock pins and rivets, along with a weight-reducing groove present on either side. This groove is one of the tell-tale signs that this is an early-style AK variant, replicating the AK-47 Type 3 Milled receiver faithfully.

At the rear of the left side of the receiver, we can find our second sling point; constructed from steel and attached to the inside of the polymer receiver. This sling point allows for some flexibility, ensuring that with a two-point sling installed, you can carry the rifle comfortably without the sling snagging. Being a steel sling point, it should also be up to the task of supporting the DA-C12 with a single-point sling, but we think that is far too modern for this classic, retro platform!

On the right side of the receiver, we can find the mock bolt carrier, which is made from alloy and can be pulled back and released with a satisfying "clank". Though this is not necessary to operate the DA-C12, it is a nice touch of added realism and simply feels badass! With the charging handle held back, we can find the slider adjuster for the DA-C12's adjustable HOP-up unit.

This HOP-up unit is made from alloy and allows backspin to be applied to your BBs, stabilising them whilst extending range and improving wind resistance. The HOP-up unit can be adjusted and set for a wide range of BB weights, depending on your individual requirements and whether you play outdoors or in tight CQB sites. We recommend choosing 0.25g BBs, which are perfect for both indoor and outdoor skirmishes.

Moving back towards the controls, we can find one of the most "AK-47-y" of this AK-47 replica's features; its fire selector lever. The fire selector is made from steel and configured in classic AK style, doubling as a dust cover to keep debris out of the action of the real thing. The first position is "Safe" mode, the middle position is fully automatic, and the lowermost position indicates the semi-automatic mode.

At the bottom of the receiver, we can find the magazine well, magazine catch, trigger guard, and pistol grip. The pistol grip is rocking the same fantastic faux-wood finish as the stock and handguards and is made to match the original AK-47 pistol grip perfectly. The trigger guard/mag release assembly is made from steel and enlarged to allow for thick gloves to be used; an essential feature considering the AK-47's country of birth!

The magazine release can be found in front of the trigger guard; a paddle-type release which is accessible from either side, making it useful for both left and right-handed shooters. The magazine insertion method for the AK-47 is "rock and lock" style, requiring the front of the magazine to be indexed inside the front of the magwell first, after which you can rock the magazine rearwards and engage the mag catch, locking the magazine in place. If you're struggling, check out our video: How to Load an Airsoft AK.

The battery compartment of the DA-C12 is located inside the receiver, beneath the steel receiver top cover. To access it, simply press the serrated button on the rear of the receiver and the top cover can be lifted off, revealing a mini-Tamiya battery connector. We recommend a 9.6V 1600mAh NiMh battery or a 7.4V 1200mAh LiPo battery in AK stick configuration for an easy fit and superb performance. With your battery installed, simply reposition the top cover to index beneath the trunnion block at the front and pop it back down, pulling the charging handle to lock it in place if needed.

At the rear, we are equipped with the original AK-47 pattern fixed stock, matching the angle and length of pull of the real steel AK-47 Type 3 perfectly. Made from high density polymer with the same gorgeous faux wood finish as the handguards and pistol grip, and the butt plate is made from steel, just like the real thing. The butt plate is basic and unserrated, but if you have worries about wet weather traction you can add a Rubber Butt Plate.

Internally, the DA-C12 is respectably equipped, based around an alloy version 3 gearbox with 18:1 steel gears. The inner barrel is a 6.03mm tightbore example, offering improved accuracy potential with high-quality ammo. The HOP-up unit is also made from alloy, a significant step up in strength compared to standard polymer units. As mentioned, all internal parts are Tokyo Marui spec, meaning aftermarket upgrades and replacement parts are easy to source, with loads of variety available.

Whether you're new to the sport and want to start with a classic AK or you need a budget AK in your life to complete the collection, the Delta Armory DA-C12 CHARLIE™ AK-47 AEG; Classic is a solid choice. Light enough that it won't slow you down with plenty of performance perks and unlimited upgrade potential, this AK-47 makes a fantastic beginner platform, loaner gun or primary for aggressive fast-movers!

Features

• 6.03mm Tightbore inner barrel - Superb accuracy potential
• Alloy/steel/polymer build - Nice and light, metal where you need it
• Detailed faux wood furniture - Convincingly provides the classic AK aesthetic
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
• Adjustable tangent iron sights - Slide the drum to adjust, great for engaging moving targets
• High density polymer receiver - A great match for the AK-47 Type 3, milled style with mock rivets
• Steel receiver top cover - Smooth like the original AK, steel build for authenticity
• 3-position fire selector - SAFE - FULL AUTO - SEMI AUTO config, just like a real AK rifle
• Alloy slider adjustable HOP-up unit - Pull back the charging handle to access, tune for your choice of BB weight
• Steel trigger guard/mag release assembly - Nice and strong, not to mention authentic!
• Ambidextrous magazine release - Centrally positioned, ideal for left or right-handed shooters
• Faux wood pistol grip - Matches the real AK-47 perfectly, almost looks like real wood!
• Fixed stock with steel butt plate - Detailed faux-wood finish to complete the classic AK-47 look!
• Top wired: Mini-Tamiya battery connector - Recommended battery: 9.6V 1600mAh NiMh | 7.4V 1200mAh LiPo
• Compatible with AK-47/74 AEG Magazines - Spare mags are cheap and plentiful!
• Need rails? Add the CYMA 20mm Picatinny Railed Handguard

Package Includes

• Delta Armory DA-C12 CHARLIE™ AK-47 AEG; Classic
• 130rnd Medium capacity magazine