- Full metal construction - Mostly CNC 6063 Alu
- Licenced by PROARMS® - Detailed trademarks
- ETU, Tightbore, MOSFET & 16-inch barrel - DMR build?
If you're looking for a rock-solid DMR base gun with real-world foundations and pre-upgraded internals, check out the Delta Armory PROARMS® PAR MK3 16". This full metal M4/AR-15 AEG platform is based on the real PROARMS PAR MK3, a cutting-edge AR-15 platform which simply cannot be built from Airsoft aftermarket parts.
Like the real thing, the majority of the Delta PAR externals are constructed from CNC 6063 aluminium, sidestepping the usual Airsoft alloy for a stronger, more long-lasting external build. As we might expect, the machining quality is absolutely flawless, as are the authentic licenced PROARMS trademarks precisely engraved on each side of the modernised receiver.
At the heart of the PAR MK3, we are treated to Delta Armory ALPHA ETU series internals, meaning reinforced SHS parts sit side by side with a CNC aluminium piston head and cylinder head and a CNC steel spring guide and cylinder, powered by a high torque Neodymium magnet motor and kept in check by the Delta Armory programmable ETU/MOSFET system. Whether you build it out into a high FPS DMR or keep it stock, the Delta Armory PROARMS® PAR MK3 16" will be an asset to any long-range objective!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you're looking for a DMR base gun that stands out as something unique, the Delta Armory DA-PAR-16 PROARMS® PAR MK3 16" is exactly that. Constructed primarily from CNC 6063 aluminium with alloy and steel parts, the PAR is built like a tank and this being the 16-inch barreled version, is ideal for long-range duties.
The real PAR originates in the Czech Republic as a military/civilian AR-15 design offered to both military and police units and competitive shooters. The real deal's receiver is made from CNC aluminium rather than the usual forged and machined AR receivers, giving it a unique modern look at the cutting edge of rifle design.
The Airsoft version is no different, rocking a 6063 aluminium receiver and handguard with some of the most precise engraved trademarks we have ever seen on an Airsoft gun. The internals are similarly sweet, boasting the best internal parts from the Delta Armory ALPHA ETU series, including reinforced parts from SHS, a high torque Neodymium magnet motor and a programmable MOSFET/ETU system.
There are plenty of cutting-edge ARs out there with fancy handguards but the PAR MK3 breathes new life into the entire build of the ageing AR platform with a full external overhaul and the result is absolutely jaw-dropping!
Starting at the front, we can find a birdcage flash hider mounted to the 14mm CCW male threads at the tip of the lengthy 16" outer barrel. The birdcage looks great, but can easily be replaced with a tracer unit for an instinct-aiming edge in low light or a suppressor for the stealthy aesthetic. The 16" barrel makes this version of the PAR MK3 ideal for a DMR build base gun but equally capable of being used as it is in outdoor skirmishes requiring extra range.
Moving rearwards, we come to the CNC 6063 aluminium handguard; equipped with 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm Picatinny accessories you choose to mount. The handguard is similar in profile to the HK416, being slightly taller than a standard M4/AR-15 handguard to match the real thing. The front end of each rail is dynamically bevelled and oblong ports punctuate the rail surfaces to reduce weight for improved handling and easier target-to-target transitions. The handguard of the 16" version measures a healthy 12 inches in length, meaning you have all the room you could ever need to mount a massive rifle scope, bipod, PEQ or DBAL and much more!
On the top of the handguard, we can find our front flip-up iron sight which is spring-loaded, requiring a press on the textured surface at the rear to deploy. The rear sight is mounted to the receiver rail and functions the same way; simply press the button and up it pops. Elevation adjustments are applied on the front sight using an AR-15 front sight adjustment tool and windage on the rear sight via the dial on the right side. The rear sight also features two apertures, a fine one for bright conditions and accurate semi-auto fire and a wider one for low light scenarios and full auto.
Following the handguard, we come to the receiver which is also CNC machined from high-grade 6063 aluminium, making it a significant step up from the usual alloy receiver. The machining is absolutely immaculate, with sharp details and precisely engraved PROARMS trademarks on both the left and right side of the magazine well. Using real steel images for reference, the Delta Armory PAR 16" is bang-on perfect, with all the correct angles, protrusions and the combination forward assist/brass deflector budge machined exactly like the real thing. While it may not be an H&K, there is no compromise to be found in the PAR!
The layout of the controls matches other M4/AR-15 platforms, meaning no need to retrain if you are used to a standard AR despite the unique receiver of the PAR MK3. The fire selector is positioned just above the pistol grip and offers 3 modes of fire; SAFE, SEMI and AUTO, with a 90-degree throw between each mode. This makes the selector easy to switch, but not so easy that it can be knocked out of position accidentally. Each mode is denoted with crisply engraved bullet pictograms but the full auto mode is unmarked as the real PAR MK3 is semi-automatic only. No need to worry, the full auto mode on the Delta Armory PAR MK3 is still present in the third selector position as with any other M4. The magazine release is on the right side of the magazine well and is accessible for a right-handed user with the tip of the trigger finger.
Pulling back the charging handle, located at the top rear of the receiver will open the dust cover and retract the mock bolt carrier to allow access to the rotary HOP-up adjuster. This is the latest HOP-up unit design for the M4/AR-15 and provides finer increments of adjustment and holds its setting more effectively when compared to the older gear style HOP-up unit. The charging handle has an extended latch for easier access, allowing even those with thick gloves to access the HOP-up unit, though you may need to take off a glove to turn the adjuster!
The pistol grip of the PAR MK3 boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Based on the real steel "Gunfighter mod.3" grip, a modern ergonomic design, each flank of the pistol grip includes fine texturing for perfect wet weather handling. The trigger is known by Delta Armory as the CNC Type A Flat trigger, offering a flat serrated front surface with a short finger ledge, ideal for rapid double taps.
At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees even if you mount a massive rifle scope, PEQ box and RunCam, the sling plate will be strong enough to support the weight. Following the sling plate, we come to the good old AR buffer tube, constructed from alloy and offering 6 adjustment positions for the pre-installed stock, or any other M4/AR-15 AEG stock you choose to mount!
The stock itself is a crane-inspired design with a slimline form and a comfortable angled cheek rest, featuring a QD sling socket on either side, together with conventional "footman loops", aka sling slots. With a rubber butt plate featuring lattice checkering, this slimline crane stock stays solidly in your shoulder in any weather conditions but can be swapped for alternative M4/AR-15 AEG stocks if you want to change up the looks or have a preferred stock in mind for your build.
The buffer tube also serves as the battery compartment for the PAR MK3. To access the battery compartment, you will need to pull the stock adjustment lever (located on the bottom of the stock) out and hold it in place, after which you can slide the stock off the buffer tube, revealing a Deans/T-Plug battery connector inside. We recommend a 7.4V 1300mAh LiPo in stick configuration for the PAR MK3 though you may need to keep the stock extended to fit this battery inside. Delta Armory recommends a LiPo battery measuring 1.4 x 1.9 x 10 cm approximately for full functionality of the sliding stock.
Inside the version 2 gearbox, we are treated to CNC 18:1 ratio steel gears running on 7mm ball bearing bushings, an SHS piston with a full rack of steel teeth, an SHS tappet plate for reliable feeding, and a CNC aluminium piston head, cylinder head and nozzle for maximum long term durability. The cylinder is also CNC machined from steel, as is the spring guide.
These ultra-strong CNC parts are powered by a high-torque motor with Neodymium magnets, kept in check by the ETU/MOSFET system. The result is an incredible trigger response and rate of fire paired with an extra range advantage in the 16" version thanks to its impressive 410mm long 6.03mm tightbore inner barrel. The party trick of the ETU/MOSFET is the ability to program the fire controls for burst mode, binary trigger and pre-cocking, allowing you to improve hit probability at long range without wasting ammo with full auto.
If you're looking for a long ranged AR that cannot be built from aftermarket parts, the Delta Armory PROARMS® PAR MK3 16" fits the bill! With absolutely gorgeous externals rivalling the best and respectable pre-upgraded internals which give you a fantastic foundation for a DMR build, the PAR MK3 16" is the perfect modern alternative to MK12 SPR and other ageing AR DMR platforms!
Features
- Full metal construction - CNC 6063 alu receiver & handguard
- 6.03mm Tightbore inner barrel - Awesome accuracy potential
- Programmable MOSFET/ETU Pre-installed - Burst mode, binary trigger & pre-cocking options
- 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
- 16" Barrel length - Great for long range or a DMR build
- 20mm Picatinny quad rail - Ready for 20mm Picatinny accessories at 3, 6, 9 or 12 o'clock
- Flip-up aperture iron sights pre-installed - Adjustable and spring-loaded for fast deployment
- Unique PROARMS receiver design - Ultra modern, looks like nothing else out there!
- PROARMS trademarks engraved on each side of the magwell - Flawless, sharp engraving
- Rotary adjustable HOP-up unit - Accessible through the ejection port when the charging handle is held back
- Ambidextrous sling plate - Steel construction, ready for a single-point sling
- Ergonomic pistol grip - Gunfighter Mod.3 style, comfortable with a reduced grip angle
- Enlarged trigger guard - Easy access to the trigger when wearing thick gloves
- Flat "CNC Type A" trigger - Great for rapid semi-auto shooting
- 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type and loadout
- Slimline crane style stock pre-installed - QD sling point on each side, buffer tube battery compartment
- Rear wired: Deans/T-Plug battery connector - Recommended battery: 7.4V 1300mAh LiPo in stick config
- MOSFET/ETU programming instructions are available via the QR code on the wiring inside the buffer tube
- Compatible with M4/AR-15 AEG magazines - Plenty of spares available
Package Includes
- Delta Armory DA-PAR-16 PROARMS® PAR MK3 16" M4/AR-15 AEG
- 120rnd Mid-cap magazine
- User manual
Specification
General
|
Assault Rifle , DMR Type ,
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Approx. 330fps ± 10%, using 0.20g BB
|
|
Yes
|
|
Yes
|
|
Magazine
|
|
Regular Player
|
Weight and Dimension
|
Approx. 2.809kg
|
---|---|
|
83cm
|
|
91cm
|
Construction
|
Black
|
---|---|
|
CNC 6063 Aluminium handguard & receiver. Alloy outer barrel, gas block, buffer tube & trim parts. Steel body pins, sling plate & dust cover. High density polymer stock & pistol grip
|
|
Polymer
Alloy
Aluminium
Steel
|
|
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
AR, M4 / AR-15 / M16, Assault Rifle, PROARMS PAR MK.3,
|
|
STANAG, Long Gun Magazine, Assault Rifle, M4 / AR Platform,
|
|
Safe
Semi Automatic
Full Automatic
Programmable
|
|
Trigger Lock
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Behind mock bolt carrier, accessible when the charging handle is pulled and held to the rear.
|
Furniture
|
|
---|---|
|
20mm RIS / RAS , 20mm Railed Receiver,
|
|
Sliding , Multi-Position ,
|
|
6 Position
|
|
Iron Sights , Aperture Iron Sight,
|
|
Buffer Plate , Stock , QD , Loop ,
|
Barrel
Outer Barrel Length (in)
|
16''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.03mm
|
|
410mm
|
Magazine Specific
|
Medium Capacity , AEG,
|
---|---|
|
Approx. 120 Rounds
|
|
Speed Loader
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
V2 Gearbox
|
---|---|
|
Rear Wired
|
|
Yes
|
|
Yes
|
|
No
|
Motor
|
High Torque
|
---|
Battery Specific
|
Deans
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Stick
|
|
7.4v
|
Product Testing Data
|
330 FPS +/- 10%
|
---|---|
|
0.2g ASG BLASTER
|
|
12/02/2024
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |