Refine results
Refine by
Viewing 30 of 32.
grid
list
£79.99
  • CNC Aluminium construction
  • KeyMod/20mm handguard for M4/AR-15
  • Available in 7, 9, or 12-inch lengths

If you have plans to give your M4/AR-15 an external overhaul, a new handguard is a great place to start. The HASTA NSR Free Float KeyMod Handguard for M4/AR-15 fits most M4/AR-15 AEG and GBBR platforms and is equipped with KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny up top, ready to be decked out!

The NSR Free Float is constructed from CNC machined aluminium with an aluminium barrel nut and steel attachment bolts and will require an M4/AR-15 armourers wrench or barrel nut tool to install. The included aluminium barrel nut is pre-installed inside the handguard itself and its aluminium construction helps save weight for improved handling and reduced in-game fatigue. 

Whether you are addicted to chopping and changing your AR or you have an old one that could do with modernisation, the HASTA NSR Free Float is a fantastic choice with a slick modern aesthetic!

£17.99
  • Fits KeyMod Rails
  • Set of Four Pieces
  • For G&G SR Series

A set of four Rubber-constructed Rail Covers for G&G SR Series KeyMod Handguards. If you own a G&G SR Series AEG and you want a comfortable hand-hold which provides good grip even when wearing gloves, you need a set of Rail Covers. This set is designed for the G&G SR Series; it may fit other KeyMod Handguards but it is designed for and fits best on the G&G Armament SR Series Airsoft Electric Guns. To install to a Handguard, simply push the slots into the desired KeyMod slot and then push the Rail Cover forwards to 'lock' it in place.

£17.99
  • Hexagonal texture
  • For KeyMod handguards
  • 4x 10cm Covers provided

If you love the slim feel of your KeyMod handguard, but it is a bit sharp, and a bit cold to grip during winter? G&G have the solution! These KeyMod rail cover panels are constructed from high-density polymer and feature a hexagonal texture on their surfaces to provide enhanced control over your KeyMod handguard in poor weather conditions and help prevent accidental cheese grating action from the KeyMod slots! The covers can be mounted quickly, with no need for tools, and are a great way to add comfort to your KeyMod setup or provide a visible and tactile index point to encourage a consistent grip on the rifle. The set includes 4 cover panels of 10cm in length which can also be cut down to cover smaller KeyMod surfaces if needed. Please note, we cannot accept returns on any rail panels which have been cut down.

£29.99
  • Set of Two
  • For KeyMod Rails
  • Provides 2 x 3" 20mm

A set of two Rail Pieces for KeyMod Handguards, which will provide 3" of 20mm RIS/RAS each. They are easy to install to any KeyMod Rail System, and are a great alternative to purchasing KeyMod compatible accessories.

£44.99
  • ALPHA Handguard
  • KeyMod compatible
  • Extremely light weight

Made from 6061 Aluminium with a matt black anodised finish, this ALPHA KeyMod handguard for AK47/AK74/AKM provides all the latest advantages to this venerable platform. With the real version of the ALPHA being in service with the Russian military, you can dress your AK like Spetsnaz with no gains in weight, owed to this handguards lightweight design. With 5 surfaces to mount your accessories, you can mod more keys onto this than your typical AR15 handguard!

Compatible with INOKASU, GHK, LCT and Tokyo Marui replicas.

£44.99
  • Lightweight design
  • CNC Machined Aluminium
  • Compatible with AKS-74U Krinkov

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

£79.99
  • Aluminium construction
  • 20mm Picatinny and KeyMod 
  • Modular construction - Various configurations possible

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

£3.99
  • 2'' KeyMod Panel
  • 20mm RIS / RAS
  • Lightweight

An Airsoft modular rail panel designed to fit onto KeyMod hand guards, providing a 2'' 20mm RIS / RAS rail. The product comes as a kit and is easily built and can quickly be installed to KeyMod hand guards to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is a perfect purchase for any Airsoft player who has got their hands on a new rifle and is looking to take their gun to the next level by attaching parts and accessories.

£4.99
  • Ten Pieces
  • Rubber Design
  • Textured Panels

A set of ten Rubber rail panels for KeyMod rail systems, which provides a protective and grippy surface to improve handling over the weapon, even when using gloves.

£4.99
  • Typhon style hex texture
  • Compatible with M-LOK & KeyMod
  • Includes 1 x 40mm, 1 x 80mm & 1 x 120mm covers

If you want to give your M-LOK or KeyMod rail a new look or keep your attachment slots protected, rail covers are what you need! The MGP PPG Rail Cover Panel for M-LOK and KeyMod are supplied as a set of 3 covers; one 40mm, one 80mm and one 120mm cover and are designed to attach to both KeyMod and M-LOK slots. Each cover has hex pattern texture on the surface, inspired by Kryptec Typhon camouflage. The texture both looks fantastic and provides excellent gripping qualities, improving the wet weather handling of your primary and making it look more unique.

The covers are constructed from Nylon reinforced polymer and as such are rock solid, with not a hint of flex to be found. The supplied T-nuts are constructed from steel to provide ample strength to keep the covers tightly fitted, even when heavily used. If you want to style up your primary and give it the custom looks, these covers will do just that and make your primary more ergonomic as a bonus!

£4.99
  • Typhon style hex texture
  • Compatible with M-LOK & KeyMod
  • Includes 1 x 40mm, 1 x 80mm & 1 x 120mm covers

If you want to give your M-LOK or KeyMod rail a new look or keep your attachment slots protected, rail covers are what you need! The MGP PPG Rail Cover Panel for M-LOK and KeyMod are supplied as a set of 3 covers; one 40mm, one 80mm and one 120mm cover and are designed to attach to both KeyMod and M-LOK slots. Each cover has hex pattern texture on the surface, inspired by Kryptec Typhon camouflage. The texture both looks fantastic and provides excellent gripping qualities, improving the wet weather handling of your primary and making it look more unique.

The covers are constructed from Nylon reinforced polymer and as such are rock solid, with not a hint of flex to be found. The supplied T-nuts are constructed from steel to provide ample strength to keep the covers tightly fitted, even when heavily used. If you want to style up your primary and give it the custom looks, these covers will do just that and make your primary more ergonomic as a bonus!

£5.99
  • QD system
  • Swivel adaptor
  • M-LOK / KeyMod system

MGP brings us a high quality Quick Detach (QD) sling adaptor, allowing you to connect your weapon of choice to a sling. The QD system is locked in place by 4 steel ball bearings which are lowered with a push of the centre button to lock in place and release, again by pressing down the same button.

This version supports M-LOK and KeyMod systems. Simply loosely screw the fixtures together using the Allen key included, then slide them into your KeyMod or M-LOK rail, then tighten to lock the fixture in place and voila! Now you can attach and detach your sling swivel with ease, allowing for a dynamic and efficient playstyle on the battlefield.

No more unslinging your rifle from your back or shoulders!

£7.98
  • For KeyMod Rails
  • Quick Detach System
  • Tough Alloy Construction

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

£8.99
  • Textured Surface
  • KeyMod Rail Foregrip
  • Low Profile Compact Grip

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

£8.99
  • Textured Surface
  • KeyMod Rail Foregrip
  • Low Profile Compact Grip

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

£11.99
  • For KeyMod Rail
  • Lightweight Alloy
  • Hand Stop Mount

A pair of KeyMod Rail panels, designed to be attached to KeyMod Railed Hand Guards and provide a Hand Stop point, using it to stop your hand from sliding down the front of the Handguard and stopping over reach.

£12.99
  • Various Lengths
  • 6 x Rails Included
  • For MLOK or KeyMod

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

£12.99
  • Various Lengths
  • 6 x Rails Included
  • For MLOK or KeyMod

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

£13.99
  • For KeyMod Rail
  • 6'' Rail Panel Set
  • Includes Two Rails

A 20mm RIS rail section that is compatible with the KeyMod Rail system, designed to be attached to KeyMod Railed Hand Guards and Provide a 6" 20mm RIS Rail for attaching various accessories.


£13.99
  • For KeyMod Rails
  • Alloy Construction
  • Included w/ QD Loop

An Alloy constructed sling mount for KeyMod rail systems, which comes included with a QD sling loop ready for any basic-clasp sling.

£15.99
  • Compact Grip
  • Brace Your Rifle
  • For KeyMod Rails

A tough constructed Polymer Foregrip which is compact and provides a forward point to brace against your rifle and achieve more stable manipulation of the muzzle. It is easily installed to KeyMod rail systems by loosening the Allen Bolt on the underside, sliding the grip into place and securing the Bolt again.

£15.99
  • Compact Grip
  • Brace Your Rifle
  • For KeyMod Rails

A tough constructed Polymer Foregrip which is compact and provides a forward point to brace against your rifle and achieve more stable manipulation of the muzzle. It is easily installed to KeyMod rail systems by loosening the Allen Bolt on the underside, sliding the grip into place and securing the Bolt again.

£15.99
  • Compact Grip
  • Brace Your Rifle
  • For KeyMod Rails

A tough constructed Polymer Foregrip which is compact and provides a forward point to brace against your rifle and achieve more stable manipulation of the muzzle. It is easily installed to KeyMod rail systems by loosening the Allen Bolt on the underside, sliding the grip into place and securing the Bolt again.

£16.99
  • 20mm Picatinny rail
  • Compatible with Krytac Maxim 9 GBB
  • Add a light or laser to your Maxim 9!

If you have plans to build out a Krytac Maxim 9 as a primary pistol you will want this! The Krytac SilencerCo Maxim 9 GBB Pistol 20mm Picatinny Rail Kit provides a single 20mm rail which can be mounted to the KeyMod slots on the bottom of the Maxim 9 suppressor, and is the perfect length to look just right.

20mm Picatinny rails allow you to mount a laser aiming module or a tactical flashlight to your silent killer and assist your efforts in cleaning up the CQB site. For those who see the potential in the Maxim 9 to be the ultimate CQB tool, this rail kit will be an asset! 

The Krytac Maxim 9 GBB 20mm Picatinny Rail Kit is currently available for pre-order. We expect our delivery to arrive by the end of next week (w.c 12/12/2022) at the earliest. Next Day Delivery is not currently available but stay tuned! 
£19.99
  • Aluminium Made
  • For KeyMod Rails
  • Convert to 20mm

An Aluminium constructed rail adaptor for KeyMod rail systems.

£21.99
  • Aluminium Made
  • For KeyMod Rails
  • Convert to 20mm

An Aluminium constructed rail adaptor for KeyMod rail systems.

£24.99
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

£24.99
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

£29.99
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

£34.99
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

About KeyMod Rail Attachments & Accessories

KeyMod railed Airsoft handguards are often lighter than their Picatinny counterparts thanks to the reduction in profile and the reduced amount of material used. The slimmer design of most KeyMod handguards provides improved ergonomics and a more comfortable feel, and the smaller KeyMod slots allow for mounting accessories at offset angles, something a 20mm quad rail would require an offset rail adapter to mimic. 

Accessories for KeyMod rail systems are becoming more and more widespread as negative space attachment systems take precedence over the already established 20mm Picatinny rail system. KeyMod has the advantage of offering reduced weight and a more integral look when attachments are mounted, with a smoother transition between the handguard/rail and the accessory itself. 

KeyMod accessories include vertical and angled foregrips, hand stops, bipods, flashlight mounts, sling points and 20mm Picatinny rail adapters which allow you to mount more common 20mm Picatinny accessories. Some accessories for KeyMod are also compatible with M-LOK and come with alternative bolts so you can switch between platforms easily. Whether you are upgrading your Airsoft gun with a KeyMod handguard or you are searching for KeyMod accessories and rail adapters, you'll find all your KeyMod needs met right here!