Lancer Tactical LT-19 Gen.2 M4/AR-15 KeyMod NSR AEG

If you love a lightweight, lengthy and sleek build, the Lancer Tactical LT-19 Gen.2 M4/AR-15 KeyMod NSR AEG should be in your sights. This predominantly high density polymer build has recently been revamped, boasting a modernised receiver inspired by real steel "billet" receivers, ambidextrous fire controls and the super-slick "NSR" stock and pistol grip package, inspired by the latest and greatest real steel parts.

Inside, the LT-19 is based around Lancer's proven Gen.2 internals, featuring an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm bushings, a polymer piston with a full steel tooth rack and a quick-change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with a rotary-style HOP-up unit, providing competitive range and excellent accuracy potential when used with high-quality BBs. If you like a lightweight build for outdoor work, the Lancer Tactical LT-19 Gen.2 M4/AR-15 KeyMod NSR AEG will be a true asset!

Starting at the front, we can see an alloy three-prong "SF" style flash hider mounted to the 14mm CCW male threading at the tip of the 14.5-inch alloy outer barrel. The outer barrel's 14mm CCW threading means the LT-19 is ready to be kitted out with a tracer unit for CQB specialists or a suppressor for the sneaky skirmisher, though the pre-installed muzzle device adds a stylish touch to the build.

Next up, we come to the handguard assembly, a sleek free-float style design based on real steel KeyMod handguards. The handguard is made from lightweight ABS polymer equipped with 20mm Picatinny rails at 3, 6, 9 and 12 o'clock, ready for 20mm Picatinny accessories to be mounted, from vertical and angled foregrips to laser aiming devices and tactical flashlights. While it is styled to match KeyMod, the handguard is not KeyMod compatible, though this hardly matters as you can move the pre-installed side and bottom rails to wherever you need them or remove them entirely, giving you the slick, modern styling and most of the benefits of KeyMod without the extra cost!

The upper rail of the handguard meets the receiver rail seamlessly, providing a massive 15.5 inches of uninterrupted rail space along the top; perfect for optical sights of any length. Pre-installed on the top rail, the LT-19 has a set of polymer flip-up aperture iron sights designed to mount to the top rail, which are fully adjustable and can either serve as primary sights to tide you over until you get a red dot on this bad boy, or left flipped down to act as backup sights to your primary sight. The spring-assisted deployment of these sights makes them especially useful as BUIS, as you can simply press the tab on each of the sights to have them snap up and into place in an instant, ready to take the shot!

The receiver of the LT-19 is significantly styled up to match real steel "Billet" receivers, providing modern looks to pair with its ambidextrous fire controls. The fire selector is positioned just above the pistol grip on either side and offers 3 modes of fire: SAFE, SEMI and AUTO, with a 90-degree throw between each mode. This makes the selector easy to switch, but not so easy that it can be knocked out of position accidentally. The fire selector is also an enhanced design, and this, paired with its ambidextrous functionality, makes it fantastic for use in all weather, with or without gloves, left or right-handed!

The magazine release is on the right side of the magazine well and is also an extended design with a secondary mag release on the opposite side, accessible for either left or right-handed users with the tip of the trigger finger. The charging handle, located at the top rear of the receiver, is also ambidextrous, allowing it to be pulled from either side with a single finger, in line with modern AR-15 shooting doctrine. Ambidextrous controls are the primary improvement in Lancer's Gen.2 NSR line, providing a more advanced look and ensuring left-handed shooters are at no disadvantage.

Pulling back the charging handle will open the dust cover and retract the mock bolt carrier to allow access to the rotary HOP-up adjuster. This is the latest HOP-up unit design for the M4/AR15 and provides finer increments of adjustment and holds its setting more effectively when compared to the older gear-style HOP-up unit.

The trigger is a flat-style trigger, pairing well with the modernised "billet" style receiver. The trigger guard is an enlarged and built into the receiver, which allows easy access to the trigger when wearing gloves and improves the overall strength of the receiver. The pistol grip is a modern ergonomic design with a filled backstrap and a reduced grip angle, allowing for more comfortable shooting in CQB when you are running the stock fully collapsed.

The LT-19 also includes a dummy forward assist button to keep the rifle looking faithful to the real MK18 MOD.1. Present on the right side of the upper receiver, the forward assist is a separate moving part which can be pressed in but does not affect the function of the AEG.

At the rear of the receiver, we are treated to an ambidextrous sling plate, which is constructed from steel, providing ample strength to support the LT-19 on a single-point sling. This sling point can also be paired with a front sling point (available separately) if you prefer a two-point sling setup for better stability when moving with the rifle stowed. The high-density polymer AR buffer tube mounts directly following the sling point, offering 6 positions of adjustment for the Lancer Tactical "NSR" stock, making it suitable for any body type.

The NSR stock can be adjusted by holding the adjustment lever on the bottom of the stock and pulling the stock out to the desired length. A modern, low-profile design with a rolled toe for ease of use with body armour, the NSR is a fantastic stock, taking inspiration from some of the latest and greatest real steel designs. The butt plate is rubber, offering plenty of grip for wet-weather skirmishes, and the adjustment lever has texture on it to ensure you can make effective stock adjustments in the field.

The battery compartment of the LT-19 is inside either the buffer tube or the crane stock, and the choice of which you use depends on your battery. If you are using the buffer tube, a 7.4V 1200mAh LiPo stick battery is ideal, though you may need to leave the stock extended in order to fit it comfortably. To get into the buffer tube, simply pull the stock adjustment lever out, and with it held in place, the stock can be slid off entirely to the rear.

The other option is to make use of the battery compartment inside the stock itself, which can be accessed by pressing the two protruding tabs at the toe of the stock and then pushing them through. With this done, the butt plate can be lifted free, revealing a mini-Tamiya battery connector to which you mount your battery. If you are stowing your battery inside the NSR stock, you can fit a 7.4V 1300mAh LiPo in nunchuck configuration. Included in the set, we are also treated to a 9.6V 1600mAh NiMh battery to get you going, though you will need a NiMh charger to charge it.

If you prefer a longer platform but require a lightweight build to stay agile in game, the Lancer Tactical LT-19 Gen.2 M4/AR-15 KeyMod NSR AEG is a fine choice. Rock solid yet light as a feather and ready to be kitted out with accessories, the LT-19 will never hold you back!

Features

• High density polymer build - Alloy outer barrel
• 6.03mm Tightbore inner barrel - Great accuracy potential
• Rotary HOP-up unit - The latest design for the M4/AR-15
• 14mm CCW male threaded outer barrel - Alloy construction, ready for a tracer!
• High density polymer receiver and buffer tube - Lightweight and scratch-resistant
• 6-Position M4/AR-15 buffer tube - Compatible with aftermarket M4/AR-15 stocks
• Mock KeyMod handguard - Removable 20mm Picatinny rail sections pre-installed
• 20mm Picatinny railed receiver - Ready for a red dot sight or scope
• Modernised "Billet" style receiver - Mimics the looks of the latest real steel AR-15s
• Ergonomic pistol grip with refined grip angle - Greater comfort with the stock collapsed
• Enlarged trigger guard - Built into the receiver, extra room for gloves
• Ambidextrous fire selector switch - Easy mode changes for left or right-handed shooters
• Ambidextrous charging handle - Easy HOP-up access from either side
• Ambidextrous magazine release - Extended design, drop mags from the left or right side
• Ambidextrous sling plate - Steel construction, perfect for a single-point sling
• Flip-up aperture iron sights pre-installed - Spring-assisted for rapid deployment
• Rolled stock toe - Ideal for modern shooting stances
• NSR battery stock - A modern stock design which takes crane-style batteries
• QD Sling socket on the NSR stock - Ready for a QD sling swivel
• Rubber butt plate - Ample grip, with or without body armour
• Version 2 Gearbox:
  • Reinforced alloy shell
  • 18:1 Steel gears
  • 8mm Bushings
  • Polymer piston with full steel tooth rack
  • Quick-change spring system
• Rear-wired: Mini-Tamiya connector - Recommended battery: 7.4V 1300mAh LiPo in nunchuck config.
• Compatible with M4/AR-15 AEG magazines - Plenty of spares available!
• 9.6V 1600mAh NiMh Battery included - NiMh battery charger required

Package Includes

• Lancer Tactical LT-19 Gen.2 M4/AR-15 KeyMod NSR AEG
  • 120rnd Medium capacity magazine
  • Flip-up iron sights (pre-installed)
  • Removable 20mm Picatinny rail sections x 3 (pre-installed)
  • 9.6V 1600mAh NiMh Battery