Airsoft Electric Parts - Hop-Up Rubber

A soft Hop Rubber for Marui compatible AEGs offering an air-tight design, which comes supplied with a nub and is a purple colour.

Whether you're building a DMR or simply want more range from your standard AEG, an R-HOP kit can make all the difference. Unlike other R-HOP kits on the market, the Trusight Tru-Hop Gen.3 is designed to be effectively a drop-in installation, with no need for adding patches of various sizes and includes both the HOP-up bucking and a concave HOP-up nub.

The set is designed to be widely compatible and should fit most Airsoft AEG spec inner barrels, though due to its enlarged contact patch, it will only work with inner barrels with a window measuring approximately 5mm in length x 1.7mm in depth. If you are happy to get stuck in with your AEG internals and you're looking for range and accuracy improvements, the Trusight Tru-Hop Gen.3 Hop-Up Rubber is what you need!

A set of pre-made R-HOP patches designed to take the stress out of r-hopping your hop-up unit. These patches are replacements for existing hop-up rubber, and are designed to be glued into the window on the barrel rather than sliding over it. This modification is for advanced Airsoft tech, and requires existing r-hop knowledge or experience.

A high quality 50 Degree silicone hop rubber designed to replace the current hop rubber in you weapon. This particular hop rubber is made to be compatible with all standard AEG type barrels and hop units.

If you have HOP-up woes with your SMG-5 this could be what you need to fix it up! The CYMA HOP-Up Chamber with Rubber and Nub for SMG-5 AEG is a replacement original part for the CM.027 SMG-5 series but should also work in any TM based SMG-5 AEG (not NGRS variants). The set includes a complete HOP-up unit with the HOP-up arm and also includes a basic HOP-up rubber and nub, giving you everything you need to replace the entire unit in a single package. 

This set is designed for the CM.027 which is a copy of the Tokyo Marui SMG-5 AEG and should also work with similar designs but is not compatible with the Classic Army SMG-5 or the later CYMA CM.041 series SMG-5 AEGs. 

If you're looking for accuracy improvements for your M4/AR-15 AEG, the Delta Armory TRINITY R-Hop Bucking Bundle for AEG is what you need to tighten your groupings. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the TRINITY bucking is diamond-shaped, similar to the Maple Leaf Super bucking, intended to improve accuracy by applying backspin more consistently. The advantage of using a TRINITY set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you're looking for tighter groupings from your Airsoft AEG, the TRINITY R-HOP Bucking Bundle is the one to go for!

Will fit almost all Airsoft AEG on the market. The rubber is made from Silicon and features a 50 Degree Nub, applying a moderate amount of hop to BBs. 

Master Mods are a new Internal Parts manufacturer bringing a whole new meaning to the term reliable. The Master Mods R-Hop Contact rubber is a hardened contact for use with heavier weight BB's, increasing accuracy & performance.

If you're building a DMR or accurised AEG, the Delta Armory BERSERKER R-Hop Bucking Bundle for AEG is what you need to achieve maximum range. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the BERSERKER bucking is shaped to fill the HOP-up window on your barrel, just like home-brewed R-HOP setups of old. The advantage of using a BERSERKER set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you use heavy BBs and need a range increase, this set will do exactly that!

We have stocked this particular AEG hop rubber set for years. One of our most popular, reliable and promising items you can install into your own Airsoft hop unit. 

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

A high-quality silicone hop rubber designed to replace the current hop rubber in your weapon. This particular hop rubber is made to be compatible with all standard AEG-type barrels and hop units.

A popular upgrade over standard hop rubbers. The Red Shark version has 3 fins inside compared to the all smooth Blue variant from MAD BULL. 

A replacement hop-up rubber and bucking for Airsoft AEG Hop-Up units. 

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

Replacement HOP rubber for AEGs using TM AEG hop units. This will work in the vast majority of AEG Rifles, Submachine Guns and Support Guns. Perfect to replace a torn rubber or to get ahead of the seasons and have your AEG perform well in the icy cold.

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Macaron bucking is no exception. The design of the Macaron bucking features a narrower entrance to help the BB feed in a consistent spot with each cycle, and a contact patch with a refined shape intended to provide more consistent lift across the entire upper surface of the BB for greater accuracy than standard HOP buckings.

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Macaron bucking is no exception. The design of the Macaron bucking features a narrower entrance to help the BB feed in a consistent spot with each cycle, and a contact patch with a refined shape intended to provide more consistent lift across the entire upper surface of the BB for greater accuracy than standard HOP buckings.

A high quality 60 Degree silicone hop rubber designed to replace the current hop rubber in you weapon. This particular hop rubber is made to be compatible with all standard AEG type barrels and hop units.

A 50 degree AEG hop rubber for standard AEG barrels and hop units, designed and manufactured to absolutely maximise range, accuracy and consistency.

A 60 degree AEG hop rubber for standard AEG barrels and hop units, designed and manufactured to absolutely maximise range, accuracy and consistency. 

If you want to get rid of the original polymer HOP-up unit from your VFC SCAR-H you have been SOL, until now! The AirsoftPro (AP) CNC Aluminium HOP-Up Chamber set for VFC SCAR-H is constructed from CNC machined aluminium and finished in gorgeous metallic red anodising. The set includes all the parts you will need to complete the HOP-up unit and also a HOP-up bucking/rubber and an H-nub. 

This HOP-up unit offers improved strength and air seal when compared to the original unit, and it does this while keeping the weight to an absolute minimum (only 16g!) thanks to its CNC machined aluminium construction. If you want better performance at long range out of your VFC SCAR-H this is the key!

A replacement hop up rubber and bucking designed for m130-150 springs, but can also be used for low FPS builds with heavyweight BB. 

A HOP rubber for AEGs which is compatible with, and allows you to install Crazy Jet GBB inner barrels in your AEG.