All Airsoft Batteries

If you're looking for a compact battery for an HPA engine, the OVERLANDER 11.1V 350mAh 40C LiPo Block Battery; XT30 is the right tool for the job. Measuring 4.8 x 1.5 x 2.4cm approximately, with 4.5cm wire length, this block configuration battery is pre-wired to an XT30 connector and LiPo balance connector. 

If you're looking for a real beast of a battery to power your build all day long, the NUPROL 11.1V 3000mAh 20C LiPo Battery (Deans) is ideal! A massive 11.1V LiPo battery with an incredible 3000mAh capacity, this battery is pre-wired to a Deans battery connector and balance connector, with a wire length of approximately 10cm.

Each of the 3 cell groups measures 13 x 2 x 5cm approximately, and the resulting battery is rather large, so make sure you measure up before ordering. Like other LiPo batteries, we recommend charging this bad boy in a LiPo Safe Charging bag, never leaving it on charge unattended and always charging with the balance connector (the small white plug) connected to your charger. If you need 11.1V speed and the capacity to last all day, the NUPROL 11.1V 3000mAh 20C LiPo Battery (Deans) is the way to go!

A LiPo Crane Stock battery designed to fit in stocks and small spaces which other large batteries do not fit. The battery is also know as a Nunchuck battery, with the cells connected via the wires allowing them to be placed down the side of barrels or in an M4 Crane Stock.

A LiPo stock tube battery designed to fit in buffer tubes and small spaces which other large batteries do not fit.

An 11.1v 1450mAh 30C LiPo in a stick configuration, which features a Deans connector instead of the standard small Tamiya.

A ultra-thin and lightweight battery wired to a mini-Tamiya connector, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c, giving it a 20w output.

A High voltage Airsoft LiPo Battery designed to give your weapon the highest rate of fire possible, in addition to lasting as long as possible, reducing the amount of time players spend changing batteries on a Skirmish day. 

A LiPo battery for Airsoft, RC Cars and many other hobbies, which comes in a Crane Stock/Butterfly configuration with a Deans connector. This battery is perfect for rear wired crane stocks and front wired handguards.

A Lithium Polymer battery for Airsoft, RC Cars and many other hobbies which comes as a Crane Stock configuration with a Deans connector. This battery is perfect for rear wired Crane Stocks and front wired handguards, and especially AEGs that require an 11.1v battery.

This LiPo battery from Gens Ace is designed to fit into compact and slim battery compartments, such as the M4/AR15 buffer tube and the AK47/74 top cover. The battery connects to your AEG via a mini-Tamiya connector and provides 1000mAh capacity with a 25C discharge rating. The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 8.5cm, allowing some flexibility when squeezing the battery into small spaces. This battery would be great for any Airsoft gun which requires a 7.4V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

A compact block style battery from GFC Energy. The battery is comprised of 8 1.2V cells, providing 9.6V total voltage. This battery is ideally shaped for use inside an AR36 polymer handguard, a solid stock battery compartment in an SMG5, or a vertical grip battery box. This battery is wired to a mini-Tamiya connector, and can also be used for RC vehicles or other electronics hobbies.

If you're running a CYMA MOSFET-equipped AEP or the Novritsch SSE18 AEP, this is how you keep your electric pistol in the fight all day! The IPower 7.4V 680mAh 20c LiPo Battery For CYMA MOSFET AEPs is designed specifically for the CM.1xxS MOSFET-equipped AEP series and also fits the Novritsch SSE18, pre-wired to a mini-Deans connector and balance plug. Please note, this battery will NOT fit standard AEPs.

The battery can be charged and recharged using a standard LiPo balance charger, and the balance lead MUST be connected to ensure the battery is charged safely. We also recommend charging in a battery charging bag for maximum safety.

The VP Racing 8.4v 1600mAh crane stock battery is a highly popular NiMH battery that is identical to most free batteries included with Airsoft weapons.

A stick 7.4v 1100mAh LiPo designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries, intended to allow Airsofters to get the best possible performance from their Airsoft Electric Guns.

Tried and true, everyone has use for NiMh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Mini-Tamiya connector.

This NiMh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most commonly seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells, with a wire length of roughly 8cm.

If you're after a slim stick battery for a top-wired AK, the Giant Power 11.1V 1500mAh 25C LiPo Slim Stick Battery will do the trick! Ideal for slim and long battery compartments in top-wired AK replicas, this LiPo battery measures approximately 16.5cm x 1.5cm x 1.6cm, with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks and AR buffer tubes, though you will be unable to collapse the stock when installed in a standard buffer tube. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

This LiPo battery from Gens Ace is designed to fit into compact and slim battery compartments, such as the M4/AR15 buffer tube and the AK47/74 top cover. The battery connects to your AEG via a Deans connector (AKA T-Plug) and provides 1400mAh capacity with a 25C discharge rating. The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 8.5cm, allowing some flexibility when squeezing the battery into small spaces. This battery would be great for any Airsoft gun which requires a 7.4V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

A spare or replacement NiMH Battery for Airsoft Electric Pistols, such as the CYMA CM and Tokyo Marui series, perfect for staying in the fight for longer. If you want to play for longer during an Airsoft Game without having to return to the safe zone, then stock up on spare batteries today.

If you need a battery for your M4/AR-15 buffer tube or your top-wired AK AEG this should be perfect! The VAPEX 7.4v 1300mAh 20C LiPo Stick Battery measures 14 x 1.2 x 1.8cm approximately with a wire length of 9cm, making it a good fit in rear wired M4s with a buffer tube battery compartment, SMG-5K AEGs or AK AEGs in the top-wired configuration.

The pre-installed battery connector is the common mini-Tamiya type and the battery has a discharge rate of 20C, making it ideal for Airsoft applications but also useful for those needing a compact power source for electronics or R/C projects.

If you're looking for a safer alternative to LiPo batteries without compromising on trigger response or rate of fire, the 9.6V 1600mAh NiMH Crane Stock Battery from Delta Armory is a great choice. This 8-cell NiMH battery comes pre-wired with a mini-Tamiya connector and is arranged in two cell groups - commonly known as a "nunchuck" or "crane stock" configuration. This layout makes it ideal for fitting into the side compartments of crane stocks and similar designs like the Delta Armory Stock and PTS EPS Stock.

As with all NiMH batteries, it must only be charged using a suitable NiMH charger, and it should never be left unattended while charging. For added safety, we strongly recommend charging your batteries inside a Battery Safe Charging Bag. With a capacity of 1600mAh, this battery can keep most AEGs with a mini-Tamiya connector running strong for several hours of high-intensity play. However, if you're expecting to be out all day, carrying a spare is a smart way to ensure you don't miss any of the action!

A super thin triple crane stock 11.1v 1300mAh 25C LiPo, which features a Deans Connector instead of the standard Mini Tamiya. 

A 9.6v 1600mAh NiMh battery in stick configuration, often used within Airsoft AK AEGs. With a slow charge you can expect up to a whole day of Airsoft action from one charge.

This LiPo battery from Gens Ace is designed to fit into flat and long battery compartments, such as those found inside the handguards of an AR36 or SMG-5. The battery connects to your AEG via a mini-Tamiya connector and provides 1300mAh capacity with a 25C discharge rating. The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 8cm, allowing some flexibility when squeezing the battery into small spaces. This battery would be great for any Airsoft gun which requires a 7.4V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

A triple crane stock 11.1v 1450mAh 25C LiPo, which features a Deans connector instead of the standard small Tamiya.

A large stick type battery, designed to output a high power for fast trigger response and rate of fire for up to three quarters of a day on a slow charge.

A high quality 1300mAh 7.4V LiPo battery suitable for Airsoft and RC use - perfect for fitting down stock tubes and areas with a small amount of space.

A large stick type LiPo battery, ideally suited to fitting inside an M4 or M16 type AEG stock tube.

If you need a slim stick battery for your ASG Scorpion, M4/AR-15 AEG buffer tube or top-wired AK AEG this will do the trick! The Gen's Ace 7.4v 1200mAh 25C LiPo Stick Battery measures approximately 13x1x2cm which makes it perfect for rear wired M4 platforms with the standard buffer tube battery compartment, top wired AKs which house their battery beneath the top cover and SMG-5K platforms. The battery is pre-wired to a Deans connector and the length of wire between the cell group and the connector is approximately 6cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C, making it great for almost any Airsoft AEG and a perfect fit for the ASG Scorpion EVO 3A1, though make sure you measure before ordering!

This LiPo battery from Gens Ace is designed to fit into flat and long battery compartments, such as those found inside the handguards of an AR36 or SMG-5. The battery connects to your AEG via a Deans connector (aka a T-Plug) and provides 1300mAh capacity with a 25C discharge rating. The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 8cm, allowing some flexibility when squeezing the battery into small spaces. This battery would be great for any Airsoft gun which requires a 7.4V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

A Pack of two CR123A batteries that are used to power most Airsoft accessories. The battery provides 3V of power, and 1400mAh of charge.