Airsoft Magazines

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

EMG has teamed up with Lancer Systems to bring you a fully trademarked and licensed 5.56x45mm style magazine to give your Airsoft M4 AEG some serious style points! The mag features an ultra-modern aesthetic with the following trademarks:

• '5.56x45mm'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid-cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from a translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible. As with other mid-cap mags, a speed loader or loading tool is required to load the mag and loading is carried out through the fill/feed port at the top of the magazine body. If you're working on a 5.56x45mm-themed build and need modern magazines, these are perfect!

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you have an ARCTURUS AK in your arsenal and need some spare magazines for the battlefield, look no further! The ARCTURUS 30/130 Adjustable Mid-Cap for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

The magazine's capacity can be adjusted from a real capacity of 30 to a more fitting capacity for Airsoft, of 130 rounds. To adjust it, remove the magazine from the shell, and there is a switch that can be moved, one side for 30 rounds and one side for 130 rounds.

If you need more mags for your NUPROL Tango T96, Well MB-06 or ASG Urban Sniper Rifle, this is the one! The NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is a spring loaded low-capacity magazine which holds 24 BBs, loaded through the feed lips on the top either by hand or using a speed loader.

This magazine is compatible with the NUPROL Tango Series T96, ASG's Urban Sniper Rifle, the WELL MB-06 Spring Sniper Rifle and the Maruzen APS SR2 Sniper Rifle on which the design is based. If you need more mags to keep your bolt-action in the fight, the NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is ideal!

If you're running a WELL MB441 Series sniper such as the WELL MB4418-2 WELL MB4418-3, you need a couple of these. The WELL 30rd Low-Cap magazine for WELL MB441 Series Sniper Rifles is constructed with a steel shell, polymer internals and a steel feed spring, showcasing realistic mock reinforcement grooves on each side, just like real steel sniper magazines.

This mag holds 30 BBs and is loaded through the fill/feed port at the top front of the magazine body using a speed loader or loading tool. If you want to keep your Sniper Rifle in the fight for longer, these spare magazines are the key!

This polymer P90 magazine is compatible with any TM-based P90 AEG, including brands like CYMA and Novritsch. It has a translucent brown design with mock bullets visible through it, giving your SMG an extra sense of realism as you charge through the Airsoft site.

The sturdy steel feed spring makes this a mighty fine magazine that will last you a long time. This magazine can hold approximately 70 BBs, not a large amount for full auto spraying and praying, but more than enough for a game of CQB, so long as you aren't too trigger happy...

If you're rocking an MG 26(T) for that extra retro vibe on the battlefield, you'll need some of these to keep it fed! The Snow Wolf 110rnd Mid-Cap Magazine is specifically designed for the Snow Wolf MG 26(T) Light Machine Gun Replica AEG and is constructed with a steel shell, polymer internals and a steel feed spring.

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real steel MG 26(T)  magazine, these mags are rather massive. Due to their unique size and design, you'll need to find an appropriately sized magazine pouch to fit them!

If you have an ARCTURUS AK in your arsenal and are tired of constantly having to reload after every fight, you need this! The ARCTURUS 550rnd Hi-Cap Magazine for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine. Simply fill it with BBs at the fill window on top of the magazine and spin the wheel on the bottom to load the BBs.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 105rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 105bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

Stay in the fight for longer with the WELL 30rnd Low-Cap Magazine for MB02/03/07/10 Sniper Rifles! This magazine is made with an alloy shell, polymer internals and a steel feed spring and is designed for WELL-branded VSR-10 clones such as the MB02/03/07/10 series.

This mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. Compatibility-wise, this mag will work in any WELL or WELL PRO VSR-10 clone rifle and may also work in VSR-10 clones made by other brands. If you're running out of rounds before you're back at respawn, grab some WELL 30rnd Low-Cap Magazines for MB02/03/07/10 Sniper Rifles to maximise your K:D ratio!

If you need more mags to keep your beastly Barrett in the battle, here you go! The Snow Wolf 100rnd Mid-Cap Magazine for EMG Barrett M82A1 AEG is compatible with the Snow Wolf/EMG M82 and M107 Barrett AEGs but won't work with the spring-powered versions. The mid-cap mag features an alloy shell and polymer internals with a steel feed spring, and thankfully, it isn't as heavy as a real Barrett mag!

This magazine can be loaded with BBs through the fill/feed port on the top using a speed loader or loading tool. Being a mid-cap, the BBs are fed using spring pressure, which means no high-cap style battle rattle to give you away as you stalk through the woods. If you're hitting the field with a Barrett AEG, one of Airsoft's mightiest platforms, the Snow Wolf 100rnd Mid-Cap Magazine for EMG Barrett M82A1 AEG is essential!

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 60rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 60bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you need to carry some extra rounds for yourSRC SR-SP GBB Pistol, you need a couple of these! Like most Airsoft pistol magazines, it features a double-stacked design, capable of holding up to 25 rounds. Ammunition can be loaded from the front either by hand or using an Airsoft speed loader, once the BB guide has been pulled to the bottom of the magazine.

This magazine can be filled with gas via the valve on the bottom through the base plate, which is removable, allowing easier access for any maintenance and can be replaced should the magazine become damaged. On closer inspection of the magazine, subtle Raven logos have been engraved into the bottom of the base plate, a tasteful finishing touch.

If you're running an M82A1 AEG and need to keep it well fed for more in-game kills, the Snow Wolf 500rnd High-Cap Magazine for M82A1 AEGs should be on your shopping list! This mag has a whopping 500 BB capacity and is wheel-wound from the bottom. With this mag on board, you won't need to reload any time soon!

To fill this high-cap, simply open the fill window on the top of the magazine body and pour your BBs in. With this done, wind the wheel on the baseplate until the noise changes and you're ready to rock. Constructed with a metal shell and polymer internals, thankfully, this mag is far lighter and easier to carry than a real Barrett mag!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

A  spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and  WE Europe's G-Series of gas blowback Airsoft pistols. 

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

A STANAG type magazine which is designed to fit any Airsoft AEG rifle which accepts this style of magazine, such as M4, L85, 416, SCAR-L and more.

This magazine is the perfect purchase for any Airsoft skirmisher due to its low price and high quality, with the added bonus that should you one day visit a low-cap only site it can be quickly changed to suit your needs.

Perfect for any Airsofter wielding an Airsoft pump action shotgun; this pack of Airsoft shotgun shells contains 3 red and 3 black shells, each capable of holding 30 rounds of 6mm Airsoft BB ammunition.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft  Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds.