Airsoft Magazine Base Plates, Sleeves & Accessories

If you need more capacity for your EMG/Golden Eagle Keltec KSG, the Airtac M4 AEG Mag Adapter for Keltec KSG Shotgun is the way to go. Designed to fit the EMG/Golden Eagle KSG Shotgun, this adapter allows for feeding from standard M4/AR-15 AEG magazines, giving you far more on-board capacity than the usual 30-round shotgun shell magazine. Airtac recommends PTS EPM1, NUPROL, ICS or KRYTAC magazines for optimal feeding.

Installation requires disassembly, so we only recommend this adapter for users familiar with disassembling the KSG. Installation instructions can be found on Airtac's Website.

If you need more capacity to make the most of your Gate PTX, the Angled M4 AEG Mag Adapter for Gate PTX HPA Pistol from Airtac is the key. Designed to allow the PTX HPA pistol to feed from standard M4/AR-15 AEG magazines, this adapter is set at a swept-back angle to improve ergonomics, enhance aesthetics and allow you to get lower in the prone position.

Airtac recommends PTS EPM1, NUPROL, ICS or KRYTAC magazines for optimal feeding, but other magazines advertised as "Fast Feed" should also work well (EPM Gen.2, etc).

If you're building out your Hi-Capa or SSP5 for speedsoft or HPA, the Airtac HPA Adapter for Hi-Capa GBB; M4 AEG Magazines is the icing on the cake! Made from high-density polymer, this Hi-Capa HPA adapter is designed for US-spec HPA setup and feeds from standard M4/AR-15 AEG mid-cap magazines, working best with PTS EPM 1-RX mags.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. It also enhances cold-weather performance, meaning you can still run your Hi-Capa to its full potential in winter, when the cold temperatures hold standard green-gas-in-mag pistols back.

While the HPA performance benefits are clear, this adapter also lets you boost mag capacity, meaning less reloading and a built which can compete with full-sized rifles on the field. If you want to run your Hi-Capa as a primary, for speedsoft or otherwise, the Airtac HPA Adapter for Hi-Capa GBB; M4 AEG Magazines is essential!

If you're a fan of the MAC-11 but wish it were a more effective primary, the Airtac HPA Adapter for MAC-11 GBB; M4/AR-15 AEG Mags is the key! Designed for GBB MAC-11 SMGs by KWA (NS2 System), KSC (System 7) and ASG,  this adapter is designed for US-spec HPA setup and feeds from standard M4/AR-15 AEG mid-cap magazines, working at its best with PTS EPM 1-RX mags.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. It also enhances cold-weather performance, meaning you can still run your machine pistol in winter, when all the green gas-fuelled MAC-11s are in hibernation.

This adapter also adds a lot of extra capacity to a MAC-11 setup compared to its original 42-round mag, meaning you can keep heads down with its stunning rate of fire without worrying about reloading 2 seconds after the trigger is pulled.

If you want more on-board firepower for your TM or Double Eagle ZET system GBBR, the Airtac HPA Adapter for MWS ZET System GBBRs; M4 AEG Magazines is a fine option. Designed for TM/DE MWS ZET System GBBRs, this adapter is designed for US-spec HPA setup and feeds from standard M4/AR-15 AEG mid-cap magazines, working best with PTS EPM 1-RX mags.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. It also enhances cold-weather performance, meaning you can still run your GBBR in winter, when GBBRs that run on green gas really start to struggle.

The biggest benefit of this adapter is a massive capacity increase compared green gas GBBR mags, meaning less reloading and more shooting for those who prioritise in-game effectiveness over realism. If you're fed up with hitting the safe zone to reload your magazines several times a day, this adapter will save you the hassle!

If you love the recoil of GBBRs but don't like all the reloading, the Airtac HPA Adapter for MWS ZET System GBBRs; M4 AEG Magazines is ideal. Designed for TM/DE MWS ZET System and CYMA CGS GBBRs, this adapter is designed for US-spec HPA setup and feeds from standard M4/AR-15 AEG mid-cap magazines, working best with PTS EPM 1-RX mags.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. It also enhances cold-weather performance, meaning you can still run your GBBR in winter, when GBBRs that run on green gas really start to struggle.

The biggest benefit of this adapter is a massive capacity increase compared green gas GBBR mags, meaning less reloading and more shooting for those who prioritise in-game effectiveness over realism. If you're fed up with hitting the safe zone to reload your magazines several times a day, this adapter will save you the hassle!

If you're after more capacity and better rapid-fire performance from your TM Saiga-12, the Airtac High Volume HPA Adapter for Saiga 12 GBB; M4 AEG Magazines is the key. Designed for Tokyo Marui's Saiga 12K and Saiga 12 SBS, this adapter is designed for US-spec HPA setup and feeds from standard M4/AR-15 AEG mid-cap magazines, working best with PTS EPM 1-RX mags.

HPA eliminates FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. It also enhances cold-weather performance, meaning you can still run your Saiga-12 in winter, when green gas really starts to struggle.

Whether you're having a hard time with the Saiga's challenging reload or you want more capacity to switch your GBB shotgun to "easy mode", the Airtac High Volume HPA Adapter for Saiga 12 GBB; M4 AEG Magazines will do the trick!

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

If you need more firepower for your tri-shot shotgun, this mag adapter is the key! The Battleaxe M4/AR-15 AEG Magazine Adapter for M870 Shotguns allows your tri-shot M870 shotgun to be fed from common M4/AR-15 AEG magazines, offering a significant capacity boost so you can stay in the fight for longer!

Like shotgun drum magazines, the installation of this adapter requires the removal of the shell port door of your shotgun. This can be a permanent mod on some M870 shotguns, so please bear this in mind before purchasing. With this adapter on board, you can feed your shotty with M4 AEG high-cap mags or mid-cap mags in a range of styles, giving you insane firepower on the field without the bulk of a drum mag!

Want to make your VMP-1 SMG magazines look great and far easier to handle? The VMP-1 GBB SMG Magazine cover is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and is designed to slip over the lower section of the VMP-1 magazine and make them easier to handle in wet and cold weather. Making the magazine look more in keeping with the cutting-edge external design of the VMP-1 itself is just a bonus! Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place.

Want to make your VMP-1 SMG magazines look great and far easier to handle? The VMP-1 GBB SMG Magazine cover is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and is designed to slip over the lower section of the VMP-1 magazine and make them easier to handle in wet and cold weather. Making the magazine look more in keeping with the cutting-edge external design of the VMP-1 itself is just a bonus! Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place.

An authentic looking Stripper Clip for the DBoys KAR98K Bolt Action Rifle. It holds a total of five shells, makes for a faster reload of the internal magazine, and is the ideal way to carry spare shells in the field.

A spare or replacement Fill valve for Golden Eagle branded Type 870 Gas Shotguns, namely the M8871, M8873 and M8874 models. If you have a leaking Fill Valve, or you just like to be prepared, a set of replacement Fill Valves is never a bad idea, should the worst happen.

A BB holding bottle, designed to allow you to store up to 1200 BB's and then dispense them using a foldable nozzle. 

If you need improvements in efficiency and capacity for your EU-series or AAP-01, the Airtac HPA Mag Adapter for M4/AR-15 AEG Magazines; EU-series/AAP-01 is the way to go! Made from an injection-moulded polycarbonate blend, this adapter is designed to mount to a stripped-down EU-series or AAP-01 GBB magazine and allow your pistol to feed from M4/AR-15 AEG magazines and be fuelled by High Pressure Air (HPA).

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. With this adapter on board, you also get a considerable capacity boost, allowing your EU-series or AAP-01 to be used as a primary and stay competitive with rifle builds. If you're going speedy with your EU-series or AAP, the Airtac HPA Mag Adapter for M4/AR-15 AEG Magazines; EU-series/AAP-01 is the advantage you need!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you would like to make your reloads faster and less of a fumble, a magazine grip assist/pull can help make your magazines easier to pull from pouches and prevent accidental drops at a critical time. The Skull Magazine Grip Assist from MGP is designed to slip onto the bottom of your magazine and provide additional grip at the sides, and a rubber loop below the baseplate to give you a little extra to grab onto during a reload. These magazine grip assists come in packs of 3 and are available in either 5.56 style (for STANAG magazines) or 7.62 style (for 7.62 STANAG - SCAR-H, SR25, AR10 etc.). 

If you plan to run your Tokyo Marui Hi-Capa GBB on HPA, the Army Armament HPA Adapter for M4/AR-15 AEG Magazines; GBB Hi-Capa will considerably improve your firepower!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. It allows standard M4/AR-15 AEG mags to be used along with a High-Pressure Air (HPA) power source, so you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your Capa!

The set includes an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will take your gameplay to the next level!