- Specially Designed Resin
- Pick and Pluck Foam
- IP67 Rated
A heavy duty plastic hard case with multiple layers of foam designed to allow you to carry multiple items, or tall items which require extra padding. This case has a wide variety of safety features made to ensure that your most prizes possessions stay safe even during the toughest conditions.
The case is IP rated, and fully tested to give you the confidence you need to store your favourite bits of kit inside without worry. The case is waterproof, dust-proof, and shock proof, making it the perfect storage solution for anyone who wants to keep their valuables safe in a pinch.
This case is perfect for any Airsoft kit which can be used on and off the field, such as for storing more expensive Airsoft accessories and attachments, and even large digital cameras and drones. The case could also be used in multiple layers, such as for storing magazines on the lower level, and pistols on the upper layer.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The case features a large design, with plenty of space for storing multiple items or larger precious electronics. The case is specially designed with reinforcement at all key stress points, with added strength thanks to its Polypropylene (PP) + Glass Fibre construction, giving it the durability it needs to allow you to feel safe storing even your most expensive property. The case can easily be stored in cupboards or in garages, and can be stacked on top of each other without slipping thanks to the bottom feet.
The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with two thick pick and pluck layer allowing you to customise the shape of the foam to make the perfect fit to the items you intend to store. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of electronics, or a pistol and magazines. You can cut different shapes into the two pieces, or match them up perfectly for larger items.
The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.
The case features heavy duty clasps designed to keep the case secure, with two strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.
The case features a fixed Air Valve which automatically balances the pressure inside the case to the outside pressure, whilst still keeping water out. This is great for keeping pressure sensitive equipment safe when transporting at height or via plane.
This case is perfect for anyone looking to keep their valuables safe, be it an Airsoft player looking to keep their guns, sights or gear safe, or someone simply looking for a secure method of storing their electrical equipment and laptops.
Features
- Perfect for storing larger Airsoft Equipment
- Perfect for storing Digital Camera and Filming Equipment
- Great for storing sensitive tools
- Heavy duty 6mm wall thickness
- Built from durable Polypropylene (PP) + Glass Fibre
- Rubber seal
- IP Rated up to IP 67
- Watertight design to prevent water leaks
- Protected against water submersion up to 1m for 30 mins
- Dustproof to protect contents
- Reinforced exactly where needed
- Secure Dual movement clasp
- Folding grab handle for compact storage
- Rubberised grip handle to prevent slippage
- Adjustable pressure valve to balance interior pressure
- Stainless steel hinge pins
- Padlock holes for using a TSA lock or during storage
- Protects in low temperatures down to -40°c
- Protects in high temperatures up to 90°c
- Retention holding lid hinge to hold it in place whilst accessing the contents of the case
- Removable customisable foam layers
- Two Pick and Pluck Foam Layers
- Eggshell foam lid insert
- Foam base separator insert
Package Includes
- No. 1812 Bulldog High Impact Hard Case
- Egg-shell foam lid insert
- Pick-Pluck foam base insert x2
- Foam Separator base insert
Specification
General
 |
Black
|
|---|---|
 |
|
|
Product Length
|
Approx. 41cm
|
|
Product Width
|
Approx. 33cm
|
|
Product Height
|
Approx. 21cm
|
Case Related
General
 |
|
|---|
Case Features
Ratings
 |
IP67
|
|---|---|
 |
Intertek
|
 |
Waterproof IP67-IEC60529 edition 2.2 Clause 13.6 and Clause 14.2.7
Impact resistance test - ATA300 Revision 8.0 B-2-5
Immersion test - MIL-STD-810 F Notice 3 Method 512.4
Low temperature test - IEC60068-2-1 Sixth edition
High temperature test- IEC60068-2-2 Fifth edition
|
Protection
 |
 |
|---|---|
 |
Yes
|
 |
Yes
|
 |
Yes
|
 |
Yes
|
 |
-40°c
|
 |
90°c
|
Padding
 |
Yes
|
|---|---|
 |
Soft Foam
|
 |
|
Latches
 |
Dual Movement Clasp
|
|---|---|
 |
2
|
Handles
 |
Yes
|
|---|---|
 |
Folding Carry Handle
|
Wheels
 |
No
|
|---|
Security
 |
Padlock Holes
|
|---|
Dimensions & Weight
Weight
 |
Approx. 3.293kg
|
|---|---|
 |
3.578kg
|
External
 |
Approx.41cm
|
|---|---|
 |
Approx.33cm
|
 |
Approx.21cm
|
Internal
 |
Approx.10mm
|
|---|
Base
 |
Approx.13cm
|
|---|---|
 |
Approx.17.8cm
|
 |
Approx.16.6cm
|
 |
Approx.17.8cm
|
 |
Approx.16.6cm
|
Lid
 |
Approx.4.5cm
|
|---|---|
 |
Approx.17.8cm
|
 |
Approx.16.6cm
|
 |
Approx.17.8cm
|
 |
Approx.16.6cm
|
Need ideas for something extra?
- Play For Longer
- For Omega CO2
- Holds 2 x 12g CO2
This is a spare or replacement CO2 Cradle for the Tippmann Omega PV Series with a CO2 Stock. It holds two 12g CO2 Sparklets which lasts for hundreds of shots, but will need refilling with CO2 once empty. Having a spare allows you to quickly change out the cartridge rather than opening it up and replacing the CO2 Bulbs. This is a direct replacement, that is exactly the same as the one supplied in the original box. If you want to stay in the field playing for longer, rather than sacrificing your sweet position and returning to the safe zone, then this is a must-have purchase.
- Green Gas
- 520ml Contents
- 90% Propane / 10% Butane
Green Gas designed for use on gas powered Airsoft pistols, Rifles and Shotguns. The gas comes in a lightweight aluminium can and has a heavy duty metal nozzle meaning it won't snap.
- 300g Contents
- Metal Fill Nozzle
- Dust Cover Included
A high performance gas, designed to operate at lower temperatures (between 3c - 20c) allowing to use your weapon all year round. Using this high power mix gives an increase in FPS, GBB efficiency and a harder kick.
- 300g Contents
- Metal Fill Nozzle
- Dust Cover Included
Designed to make your gas Airsoft RIF more consistent between every shot and work far better in colder conditions. You will also achieve an increase in FPS but you must let the gas settle in your magazine first!
- Weaker Than Ultra Gas
- Ideal Summer Gas
- 700ml Content
A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity.
Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.
- 3MOA Target Dot
- Special VE Warranty
- Super Clear Sight Picture
An ULTRA compact, Full Metal 20mm / Pistol Weaver red dot sight designed for use on pistols / short dots & LPVO's as an RMR or as a back up sight. It has a 3MOA target dot and auto adjusting brightness levels according to your environment lighting.
This product is covered by the Vector Optics Lifetime warranty, for more information please read below.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 3-9 x 40E Zoom
- High Mounts Included
- Illuminated Cross Optic
An upgraded optic over the traditional standard 3-9x40 alternative. The E version comes with illumination settings with adjustable Red levels of brightness. Also included is a 5cm long sun shade that comes pre fitted within the box.
- Approx. 3570 BBs
- Multi-Polish Process
- 1KG Bag of 0.28G BB
Match Grade BBs created for Airsoft guns and weapons, created with a multi-polish process to give an excellent finish. The BBs are constructed from PLA (Polylactide) material, and feature a 0.01mm +/- tolerance for improved consistency.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- Polymer construction
- 1200rnd Capacity
- Autowinding drum magazine for M4/AR15 AEG
Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an autowinding design which requires 3x AAA batteries to operate.
- Special Putty
- Oils & Degreasers
- Cleaning Tools Included
A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.
- Approx. 3330 BBs
- Multi-Polish Process
- 1KG Bag of 0.30G BB
Match Grade BBs created for Airsoft Guns and Weapons, created with a Multi-Polish Process to give an excellent finish. The BBs are constructed from PLA (Polylactide) Material, and feature a 0.01mm +/- Tolerance for improved consistency.
- 0.20g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.20g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport.
- 30ml Content
- Great Lubricant
- Easy Drip Nozzle
Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.