PARRA No. 8428 Schimitar Hard Case

Code: PRA-843
Was £139.99
Save £21.00
  • Huge Hard Case
  • Water / Dust / Shockproof
  • Impact / Temp Protection

If you need a seriously big and beefy Hard Case that is fully certified to protect your most sensitive equipment, then you're in the right place. The Schimitar Hard Case is a generously-sized solution to all things storage. With three thick layers of Pick and Pluck Foam inside, you can perfectly customise the Case to your needs, and with a tough Polypropylene (PP) and Glass Fibre mix with multiple Dual Movement Clasps and Padlock Holes, you can be sure that nothing from nature or humankind will be able to get inside without your saying so.

Full description


The Schimitar Hard Case has very deep dimensions and a good width, which makes it extremely good at containing all your equipment in one space. Whether you're a Tabletop Gaming fanatic who needs to stuff an entire army away safely, Photographer with 93 different lenses that you definitely didn't tell the other half about, or you're preparing for the apocalypse by hoarding every Night Vision Unit you can find, then this Hard Case will suit you nicely. The Case is constructed from heavy duty Polypropylene (PP) and Glass Fibre mix which is lightweight yet extremely strong, with the reinforced sections lining up with small feet allowing you to stack the cases without them sliding around. The case is well thought out, with a breathable air valve as well as a durable rubber seal which protects the contents from dust and liquids. A Heavy Duty Grab Handle with Rubber Sleeve can be found on the side of the Case to assist with carrying it, which will fold away when not in use for extra-compact storage.

The Schimitar Hard Case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with three thick pick and pluck layers allowing you to customise the shape of the foam to make the perfect fit to the items you intend to store. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of Warhammer, Drone/Photography equipment or Microphones, for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with six strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. The case also features eight pad-lock holes to protect from tampering, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone wanting to try and get to the contents.

The case features an automatic pressure valve which equalises the pressure inside the case to be the same as outside, without allowing water into the case whilst keeping the internal pressure balanced. This is absolutely essential for those who will be travelling great distances and altitudes, as pressure changes can damage very sensitive equipment.

If you need a seriously well-constructed Hard Case that you can put your faith in to protect your most precious possessions, then you can't go wrong with the Schimitar Hard Case from PARRA. Be it Extreme Temperature, changes in Altitude, submersion in Water, ingress of Dust or just plain old heavy Impacts, the Schimitar Case has got you covered.


  • Perfect for storing Sights and other Attachments
  • Perfect for storing Hard Drives and Electronics
  • Ideal for a Tabletop Gaming Army
  • Ideal for Camera accessories and Drone equipment
  • Small enough to store in other cases and backpacks
  • Built from durable Polypropylene (PP) and Glass Fibre mix
  • IP Rated up to IP 67
  • Watertight design to prevent water leaks
  • Protected against water submersion up to 1m for 30 mins
  • Dustproof to protect contents
  • Crushproof build for transport
  • Reinforced exactly where needed
  • Secure dual movement clasps
  • Folding grab handle for compact storage
  • Rubberised grip handle to prevent slippage
  • Automatic pressure valve to balance interior pressure
  • Stainless steel hinge pins
  • Padlock holes for using a TSA lock or during storage
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c

Package Includes

  • PARRA No. 8428 Schimitar Hard Case
  • Wave Foam Lid Insert
  • Foam Separator base insert
  • Pick and Pluck Foam Storage Inserts



Colour Wheel Greyscale
Item Colour
Material Icon
  • Polypropylene
  • Fiberglass
Product Length
Approx. 67cm
Product Width
Approx. 50.8cm
Product Height
Approx. 35.5cm

Case Related


Recommended For
  • Pistol
  • Tools
  • Camera
  • Camera Lenses

Case Features

IP Rating
Certificate Issuer
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
Icon - Waterproof
Dust Proof
Air Valve
Rubber Seal
Minimum Temperature
Maximum Temperature
Padding Material
Soft Foam
Padding Type
  • Egg Shell Foam Lid Insert
  • Thin Base Separator Padding
  • Pick and Pluck Separator Foam x 3
Latch Types
Dual Movement Clasp
Latch Count
Grab Handle
Handle Type
Folding Carry Handle, Rubberised Folding Carry Handles x 3,
Has Wheels
Wheel Count
Security Features
Padlock Holes

Dimensions & Weight

Weight KG Icon
Weight (KG)
Approx. 10.73kg
Weight With Padding
External Length
External Width
External Height
Internal Corner Radius
Base Internal Depth
Base Internal Lower Length
Base Internal Lower Width
Base Upper Length
Base Upper Width
Lid Internal Depth
Lid Lower Length
Lid Lower Width
Lid Upper Length
Lid Upper Width