- Removable Rubber
- Water Resistant
- For SD Cards
A highly durable heavy duty miniature plastic hard case designed to protect your SD Cards and other small items for storage. This case has a wide variety of safety features made to ensure that your important data storage mediums stay safe even during the toughest conditions, making sure all photos and sensitive data arrives intact.
The case is IP rated and tested to give you the confidence you need to store your favourite bits of kit inside without worry. The case is fully dust resistant a water resistant, protecting the content from anything up to water jets, making the case rain safe, making it the perfect storage solution for anyone who wants to keep their valuables safe in a pinch.
This case is perfect for anyone travelling with SD cards for photography, or for those who want to keep small valuable items safe in a case which is easy to stash or hide.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The case features a super small profile, making it easier to stash or hide in other base and cases, or even to simply fit in your pocket and even worn around the neck with a lanyard. The case is rugged thanks to its high quality Engineer Resin shell and Rubber SD Card holder inserts and seals. The case can be stood on by accident and even dropped without any worry of the contents being damaged.
The case comes pre-fitted with four rubber SD card holder inserts which are molded from rubber which hold up to 8 SDS cards in place and protected during travel. Each of the individual panels can be removed to requirement, allowing you to store additional small items such as cables, an SD card reader and more, subject to requirement.
The case is fully IP dated to give you the confidence you need to put your trust in the case. The case itself is rated to IP65 standards, making it fully dust proof, and water resistant up to water jets. This means that the case is perfectly safe from dust ingress, keeping SD cards and other tools safe, as well as safe from water blasts which could damage electrical items. If you're on a long rainy walk your SD cards will remain dry and safe, or if left long term in a box will be protected from dust.
The case features a heavy duty clamping claps which holds the case secure, and is very easy to open and close with one hand. If you're worried about tampering the case also features two pad-lock holes, allowing for TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.
This case is perfect for anyone travelling with SD cards for photography, such as for Airsoft Photographers or Marshals who want to keep spare SD cards on them when taking photos of gamedays.
Features
- Removable Rubber Inserts
- Holds up to 8 SD Card
- Rubber Seal
- IP65 Rated
- Dust Tight design
- Water Resistant design
- Impact resistant
- Two loops for using padlocks and TSA locks
- Loop for attaching carrying lanyard
- Stackable design with interlocking ridges
- Perfect for SD cards, small batteries and even game cartridges
- Constructed from highly durable engineer resign
- Easy to stash or hide in other bags or cases
Package Includes
- Rugged Modular SD Card Hard Case (x8)
- Removable Moulded Rubber SD Card Section x4
Specification
General
 |
Black
|
|---|---|
 |
Engineer Resin
|
|
Product Length
|
Approx. 12.7cm
|
|
Product Width
|
Approx. 8cm
|
|
Product Height
|
Approx. 1.9cm
|
Case Related
General
 |
SD Cards
|
|---|
Case Features
Ratings
 |
IP65
|
|---|
Protection
 |
 |
|---|---|
 |
Yes
|
 |
Yes
|
Padding
 |
Yes
|
|---|---|
 |
Rubber
|
 |
Removable Custom Molded Rubber
|
Latches
 |
Single Movement Clasp
|
|---|---|
 |
1
|
Handles
 |
No
|
|---|
Wheels
 |
No
|
|---|
Security
 |
Padlock Holes
|
|---|
Dimensions & Weight
Weight
 |
Approx. 0.107kg
|
|---|---|
 |
0.062kg
|
External
 |
Approx.12.7cm
|
|---|---|
 |
Approx.8cm
|
 |
Approx.1.9cm
|
Internal
 |
Approx.0.95mm
|
|---|
Base
 |
Approx.0.7cm
|
|---|---|
 |
Approx.10.9cm
|
 |
Approx.5.87cm
|
 |
Approx.10.9cm
|
 |
Approx.5.87cm
|
Lid
 |
Approx.0.7cm
|
|---|---|
 |
Approx.10.9cm
|
 |
Approx.5.87cm
|
 |
Approx.10.9cm
|
 |
Approx.5.87cm
|