Specna Arms SA-E11-L EDGE™ M4/AR-15 SD AEG w/Light Ops Stock

If you've been eyeing up all the suppressed AR options, the SA-E11-L is worth a second look. This full metal M4/AR-15 platform rocks the "SD" look with its integral suppressor and wide 20mm Picatinny quad-railed handguard, giving it a unique style which sets it apart from other sneaky beaky ARs.

As with the other AEGs of the EDGE™ range, the SA-E11-L is equipped with a 6.03mm tightbore inner barrel, rotary HOP-up unit, reinforced ORION™ V2 gearbox and an alloy receiver with Specna's "Nanocoating" finish and realistic Rock River Arms trademarks engraved in. Where this differs is the inclusion of Specna's latest low profile stock design, known as the "Light Ops Stock".

The Light Ops stock improves on existing low-profile M4/AR-15 stocks with a rubberised cheekpiece, a super grippy rubber butt pad and QD sling points on either side. The look of the Light Ops stock matches the overt aggression of the SA-E11 perfectly, and is one of the most comfortable stock options we have handled yet!

Starting at the front end we can find a pre-installed compact suppressor which covers the 280mm 6.03mm tightbore inner barrel, mounting to the 7-inch alloy outer barrel. This gives the SA-E11-L the "Honey Badger" style integrally suppressed look and a mid-length front end for superb handling in any scenario. The suppressor mounts to 14mm CCW male threading but due to the inner barrel length, a barrel extension will be required to mount a tracer unit.

Surrounding the suppressor we have a wide profile 20mm Picatinny quad-railed handguard with 20mm rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm accessories you choose to add to complete your mission. The upper rail runs back and meets the receiver rail seamlessly to allow for longer optical sights to be mounted, including red dot sight and magnifier combinations. Included with the SA-E11-L is a compact vertical foregrip which can be mounted to the 6 o'clock rail for improved handling, though if you have a preferred grip, the SA-E11 is ready for it!

The widened handguard gives the SA-E11 a front-end look not unlike the legendary MP5 SD but with much more accessory mounting space and lower weight at the front end. A widened handguard is a realistic choice for an integrally suppressed AR as slimmer handguards often cause issues with heat build-up in real firearms which can make them quite spicy to hold.

The receiver of the SA-E11-L follows the familiar M4/AR-15 format and is constructed from zinc/aluminium alloy with the Specna Arms Nanocoating finish applied, and Rock River Arms trademarks engraved on the left side of the magazine well. The finish on the receiver is smooth and consistent and is strong enough to resist scratches more effectively than a standard paint finish but thin enough to show all the details through. The trademarks are crisply engraved and visible yet discrete, elevating the realism of this EDGE™ series replica above others with white laser-etched markings.

The fire selector can be found on the left side, positioned just above the pistol grip for fast access from a firing grip. The selector provides 3 modes of fire; Safe, semi-auto and full auto, with a 90-degree throw between each mode. The modes are all indicated in classic M4/AR-15 style, with engraved markings in block capitals matching real MilSpec M4 receivers. The magazine release is on the right side of the magazine well and is easily reached from a firing grip with the trigger finger, allowing for super swift emergency reloads and the enviable handling the M4/AR-15 platform is known for.

The mock bolt catch of the SA-E11-L is located in the centre of the left side of the receiver, and while this is a dummy control which doesn't provide a function it is nonetheless a separate part to maintain the realistic appearance and avoid the tell-tale signs of being a replica. The dummy forward assist is present on the right side of the upper receiver, right where it should be. This control does nothing on an AEG, and some real AR shooters argue it does nothing on the real thing, but it is included on the SA-E11 to keep the rifle faithful to real M4/AR-15 rifles.

The charging handle is located at the top rear of the receiver and doesn't need to be pulled before the first shot. It instead serves to retract the mock bolt carrier and open the dust cover on the right side of the upper receiver, giving us access to the rotary HOP-up unit inside. The HOP-up allows you to tune the flight path of your BBs and set the SA-E11 up for different ammo weights, looking for the flattest trajectory possible. The use of the rotary adjuster style is a nice touch from Specna and futureproofs the SA-E11-L with the most modern HOP-up design for the M4/AR-15 platform, boasting an improved ability to hold its setting under the vibrations of firing and being adjustable in finer increments than the older "gear" adjuster design.

The pistol grip of the SA-E11 sits right in line with Specna's leaning towards ultra-modern furniture and boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Each flank of the pistol grip includes fine Specna texturing, matching that on the stock and magazines, and the front has linear texture to ensure you have a firm grip on the SA-E11 in any weather conditions. The trigger guard is the standard M4/AR-15 flat style, and the trigger has a curved MilSpec style trigger profile which will keep those with a Milsim leaning happy.

At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees no matter what you choose to mount to the plethora of 20mm rails on the SA-E11, the sling plate will be strong enough to support the weight.

To the rear of the sling plate, we come to the M4/AR-15 buffer tube, which is constructed from zinc/aluminium alloy and finished with the same flawless Nanocoating as the receiver. The buffer tube offers 6 positions of adjustment for the "Light Ops" stock and also serves as the battery compartment for the SA-E11-L. To access the battery compartment you will need to pull the adjustment pin of the stock out slightly (located on the bottom of the stock). With the pin held in this position, you can slide the stock off the buffer tube to the rear, and connect your battery to the Deans connector inside the buffer tube. For the SA-E11 we recommend a 7.4V 1300mAh LiPo stick battery for a perfect fit and optimal performance.

Bringing up the rear of the SA-E11 we have the Specna Arms Light Ops stock which is part of Specna's new SAAS (Specna Arms Accessory System) line. This stock is based on existing low-profile M4/AR-15 stocks but with some choice refinements for improved comfort. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

The butt plate is constructed entirely from rubber with deep linear serrations and an angled profile to more effectively grip the user's shoulder when wearing body armour. Either side of the stock boasts QD sling sockets, meaning if you add a QD sling swivel you can add and remove your sling in a matter of a second or less. The low profile adjustment lever of this stock is well out of the way and immune from snags, and has texture on its surface to allow for ease of use in wet conditions. This stock not only looks unique but functions fantastically, and the solid high density polymer it is constructed from feels like it could be used to beat whales to death.

Internally the SA-E11 is equipped with the same reinforced components present in the other replicas of Specna's EDGE™ line, including the Gate X-ASR MOSFET. The X-ASR functions as a "smart fuse", regulating the current draw from the battery and bypassing the trigger contacts to prevent corrosion and reduce resistance. The X-ASR is also protected against reverse polarity and helps raise the rate of fire and trigger response of the SA-E11 by more directly delivering power to the motor. The SA-E11 is also equipped with a 6.03mm tightbore inner barrel and the ORION™ gearbox which has a reinforced shell, the ESA™ quick change spring system, and a laundry list of reinforced parts to ensure the SA-E11 maintains its high performance for a lifetime of use.

If you like the integrally suppressed AR look but want something with a less common rail system, cutting-edge pistol grip and stock combo and reinforced internals packed with pre-upgraded parts, the SA-E11-L M4/AR-15 SD AEG should suit you perfectly. The Light Ops stock added to the EDGE™ formula is a match made in heaven and a perfect fit for this compact and agile AR!

Features

• Full metal construction
• 6.03mm Tightbore inner barrel - Great accuracy potential
• Integral suppressor - Sneaky looks, inner barrel runs through
• 14mm CCW Male threaded outer barrel - Suppressor ready, tracer ready with a barrel extension
• Quad 20mm Picatinny railed handguard - Ready for 20mm Picatinny grips, lasers and flashlights
• 20mm Picatinny railed receiver - Ready for a red dot sight or scope
• Rotary adjustable HOP-up unit - Accessible with the charging handle held to the rear
• Enlarged charging handle - Easy access to the HOP-up unit when wearing gloves
• Flip-up iron sights pre-installed - Rail mounted, modern low-profile aperture sight design
• Ergonomic Gunfighter Mod.3 style pistol grip - Comfortable and modern design
• Steel ambidextrous sling plate - Add a single-point sling on either side
• 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type and loadout
• Specna Arms Light Ops Stock pre-installed - Unique Specna low-profile stock, fantastic design
• Rubber butt plate - Grips firmly onto your shoulder, body armour or not
• QD sling sockets on either side of the stock - Ready for QD sling swivels
• Rear wired: Deans battery connector - Recommended battery: 7.4V 1300mAh LiPo in stick config.
• Compatible with M4/AR-15 AEG Magazines - Specna Arms S-MAG recommended - Mid-cap | High-cap
• 2 x 125rnd S-MAG Mid-caps included - Generous!

Package Includes

• Specna Arms SA-E11-L EDGE™ M4/AR-15 SD AEG w/Light Ops Stock
• 2 x 125rnd S-MAG Mid-cap magazines
• Stubby vertical foregrip
• User manual (Online QR Code)
• Cleaning rod