Umarex Heckler & Koch G36C Sportsline AEG; EyeTrace Version

Whether you're an H&K fan or after a lesser-seen primary packed with ergonomic perks, the Umarex Heckler & Koch G36C Sportsline AEG; EyeTrace Version will put a big smile on your face! A detailed replica of the real steel G36C, the compact version of the German Bundeswehr's G36 rifle, this licensed build is bristling with H&K trademarks, the perfect primary for a UK Armed Police loadout.

Inside, this G36C stands out thanks to its integral EyeTrace tracer unit, fitted to the adjustable HOP-up. This removes the need for a barrel-mounted tracer unit, leaning into the strengths of this compact G36 and allowing you to corner like a pro while still benefiting from improved instinct aiming in dark conditions and intimidation factor up close.

If you love a lightweight, rock-solid primary with ambi controls and plenty of rail space for accessories, the Umarex Heckler & Koch G36C Sportsline AEG; EyeTrace Version should be in your sights!

Starting at the front, we can find a polymer G36C four-prong flash hider at the tip of the alloy outer barrel. The flash hider isn't threaded, but if you remove the grub screw on the left side, it can be pulled straight off, revealing 14mm CCW male barrel threading beneath. The barrel threading means you can mount tracer units and suppressors to customise your G36 build.

Please note that suppressors with a particularly wide diameter (32mm +) may require a short barrel extension to clear the handguard. The grub screw is hard to access with the handguard installed, so if you need to switch muzzle devices, we recommend removing the handguard by pushing its retention pin out and sliding it off towards the front of the platform.

Removing the handguard also provides access to the G36C's battery compartment, which is well-suited to a slim nunchuck-configuration battery. The pre-installed connector is the Deans type, and we recommend a 7.4V 1300mAh LiPo for an easy fit and great performance.

The handguard itself is made from high-density polymer, keeping the build in line with the materials used on the real G36C. At the front, we can find a hand stop which features sling points on either side, ready for a two-point sling. On the bottom and sides, the handguard is equipped with 20mm Picatinny rails, allowing accessories to be fitted wherever you need them. The rails can also be removed if you prefer a sleeker look and a lighter-feeling front end.

Next up, we arrive at the receiver, made from high-density polymer with ambidextrous controls throughout. This makes the G36C platform a fantastic choice for left- or right-handed shooters, offering mirrored or centrally placed fire controls so you can operate the platform with ease from either shoulder.

The fire selector switch is just above the pistol grip, offering 3 fire modes: safe, semi-automatic and fully automatic, with a 45-degree throw between each. This makes the selector switch fast and easy to operate under pressure, whether you prefer to work the selector with your trigger finger or thumb.

Each mode is denoted with iconic H&K pictograms, with a crossed-out projectile in white to indicate safe mode, a single red projectile in a closed box for semi-auto and a line of projectiles in an open box for fully automatic. These pictograms have been used on all H&K firearms since the venerable MP5, and are a big part of the Heckler & Koch aesthetic.

The magazine release is centrally positioned at the rear of the magazine well, a paddle-style release which works similarly to an AK. Its central position makes it easy to access from either side, and the paddle design allows for "mag-flip" emergency reloads, provided you're okay with potentially damaging your mags.

The trigger guard is built into the trigger pack/grip assembly, boasting an enlarged design which allows easy access to the trigger, even when wearing full-finger gloves. The trigger itself is a curved design which closely matches the real steel G36, and just in front of the trigger, we're equipped with a mock bolt lock button. This button doesn't serve a function in an Airsoft replica, but in the real steel, it allows the user to lock the bolt back for malfunction clearance and chamber inspection.

Mounted to the top of the receiver, we are treated to a lengthy 20mm Picatinny rail mounted to the G36's unique receiver lugs. This rail means you can mount a 20mm Picatinny-compatible optical sight setup of your choice, from magnified rifle scopes to red dot and magnifier combos. The receiver lugs beneath the rail also allow you to swap it out for alternative G36 optics rails and built-in scopes, with plenty of slick-looking options to choose from.

The rail also features built-in aperture iron sights, with a fixed front post covered by a protective ring and an adjustable rear aperture with two aperture sizes to choose from. Adjustments for windage are applied using the Allen bolt on the right side of the rear sight, and elevation adjustments are input using the screw on the top.

Between the rail and receiver, we can find the ambidextrous charging handle. This design can be folded to either side, but by default, it sits in line with the barrel to reduce snags when not in use. Pulling the charging handle back will retract the mock bolt carrier, revealing the rotary HOP-up adjuster on the right side.

Turning the HOP-up adjuster allows you to vary the amount of backspin applied to your BBs. We recommend adjusting until the trajectory is as flat as possible with your chosen ammo weight.

This HOP-up unit also has a unique trick up its sleeve. Built into the unit itself, we have Umarex's EyeTrace technology, meaning you can use tracer BBs without adding a threaded tracer unit. Tracer BBs are great for instinct aiming, especially in low light and CQB scenarios, and with this build, you don't need to pay extra or swap parts to really light the enemy team up!

At the tail end of the G36C, we can find its side folding stock, a skeletonised design made from high-density polymer with a grippy rubber butt plate. To fold the stock, press the button on the left side, after which you can swing the stock around to the right side, where it will lock in place over the mock shell deflector. The stock locks nice and firmly, so you can fold it for a more compressed firing position in CQB without worrying that it will flop around.

The stock also features a sling point at the toe, ideally suited to HK hook-style sling hardware. If you find your sling hook doesn't fit the loop, we recommend using a keyring or paracord loop to provide a bit of extra flexibility for different sling mounting hardware.

Inside, the G36C EyeTrace is equipped with an alloy version 3 gearbox with 18:1 ratio steel gears and a quick-change spring guide for easy power tuning. Also inside is an inline FCU MOSFET, which improves electrical efficiency and trigger response while providing diagnostics via its LED indicator lights.

The highlight is obviously the EyeTrace integral tracer unit, letting you send glowing BBs downrange without hindering the agile, compact nature of the G36C by adding a threaded tracer muzzle device and increasing its overall length. The EyeTrace is also functional with both red and green tracer BBs, ideal for any preference!

If you love a lesser-seen platform with licensed trademarks and unique party tricks, the Umarex G36C Sportsline AEG; EyeTrace Version is a solid choice. A versatile, agile and modern design with ambidextrous controls, loads of rail space for accessories and a strong, forgiving build ideal for new skirmishers, this G36C ticks all the boxes!

Features

• High-density polymer build - Just like the real G36
• Licensed by Heckler & Koch via Umarex - H&K trades across the design
• FCU In-line MOSFET pre-installed - Prevents trigger lock-ups and provides diagnostics
• Integral tracer HOP-up unit - No need to mount a threaded tracer unit!
• 14mm CCW male threaded outer barrel - Ready for a suppressor
• 20mm Picatinny handguard rails - Add 20mm accessories or remove the rails for a sleeker look
• Hand stop with built-in sling points - Keeps your hand behind the muzzle, sling loops on either side
• Front wired: Deans connector - Recommended battery: 7.4V 1300mAh LiPo
• 20mm Picatinny railed receiver - Ready for a red dot sight or scope, or swap it out for a G36 integral scope
• Rotary adjustable HOP-up unit - Adjust the trajectory of your BBs for different ammo weights
• Ambidextrous charging handle - Easy HOP-up access from the left or right side
• Ambidextrous magazine release - Centrally positioned, AK style
• Ambidextrous fire selector switches - Easy mode changes for left or right-handed shooters
• Aperture iron sights - Adjustable for windage & elevation, two apertures to choose from
• Receiver sling point - On the left rear of the receiver, well-suited to HK hook sling hardware
• Side folding stock - Press the button on the left side to fold the stock to the side
• Rubber butt plate - Plenty of grip for wet-weather operations
• Additional sling points on the stock - Plenty of sling options built-in
• Version 3 Gearbox:
  • Alloy shell
  • 18:1 Steel gears
  • In-line FCU MOSFET
  • Quick-change spring guide
• Compatible with most AR36/G36 AEG magazines

Package Includes

• Umarex G36C Sportsline AEG; EyeTrace Version
  • 360rnd High-cap magazine

Special Instructions

The integral EyeTrace tracer HOP-up unit is powered on as soon as you connect your battery. This means it is very important that you don't leave your battery installed when the AEG is not in use. Failure to disconnect the battery will drain it fully and potentially render it useless.