Valentines Day 2021: Cool bits under £50

Whether you're looking for high-quality work gloves or want to add a bit of high-end style to your Airsoft loadout, Mechanix The Original® Gloves are a fine choice. Ideal workwear, skirmish-wear or multi-purpose hand protection, Mechanix The Original® Gloves are a proven design, the legendary glove style which put Mechanix on the map all those years ago.

Along with the iconic Mechanix aesthetic, The Original® Gloves offer superb dexterity and are extremely rugged, with a 0.8mm synthetic leather palm which works perfectly with touch screens, allowing you to stay connected while you work hard or play hard! The upper palm is made from Mechanix's proprietary TrekDry™ material, keeping your hands cool while wicking away sweat and moisture.

The Original® Gloves are secured with a Thermoplastic Rubber (TPR) wrist strap, keeping them firmly on and allowing for adjustment at the wrist. We are also treated to a robust carrier loop on each glove, allowing you to keep your gloves on your belt or tethered together using a carabiner, Grimloc or glove clip. For cycling, workwear, Airsoft and anything else, Mechanix The Original® Gloves are leaps and bounds above the rest!

Whether you're looking for high-quality work gloves or want to add a bit of high-end style to your Airsoft loadout, Mechanix The Original® Gloves are a fine choice. Ideal workwear, skirmish-wear or multi-purpose hand protection, Mechanix The Original® Gloves are a proven design, the legendary glove style which put Mechanix on the map all those years ago.

Along with the iconic Mechanix aesthetic, The Original® Gloves offer superb dexterity and are extremely rugged, with a 0.8mm synthetic leather palm which works perfectly with touch screens, allowing you to stay connected while you work hard or play hard! The upper palm is made from Mechanix's proprietary TrekDry™ material, keeping your hands cool while wicking away sweat and moisture.

The Original® Gloves are secured with a Thermoplastic Rubber (TPR) wrist strap, keeping them firmly on and allowing for adjustment at the wrist. We are also treated to a robust carrier loop on each glove, allowing you to keep your gloves on your belt or tethered together using a carabiner, Grimloc or glove clip. For cycling, workwear, Airsoft and anything else, Mechanix The Original® Gloves are leaps and bounds above the rest!

Whether you're looking for high-quality work gloves or want to add a bit of high-end style to your Airsoft loadout, Mechanix The Original® Gloves are a fine choice. Ideal workwear, skirmish-wear or multi-purpose hand protection, Mechanix The Original® Gloves are a proven design, the legendary glove style which put Mechanix on the map all those years ago.

Along with the iconic Mechanix aesthetic, The Original® Gloves offer superb dexterity and are extremely rugged, with a 0.8mm synthetic leather palm which works perfectly with touch screens, allowing you to stay connected while you work hard or play hard! The upper palm is made from Mechanix's proprietary TrekDry™ material, keeping your hands cool while wicking away sweat and moisture.

The Original® Gloves are secured with a Thermoplastic Rubber (TPR) wrist strap, keeping them firmly on and allowing for adjustment at the wrist. We are also treated to a robust carrier loop on each glove, allowing you to keep your gloves on your belt or tethered together using a carabiner, Grimloc or glove clip. For cycling, workwear, Airsoft and anything else, Mechanix The Original® Gloves are leaps and bounds above the rest!

Whether you're looking for high-quality work gloves or want to add a bit of high-end style to your Airsoft loadout, Mechanix The Original® Gloves are a fine choice. Ideal workwear, skirmish-wear or multi-purpose hand protection, Mechanix The Original® Gloves are a proven design, the legendary glove style which put Mechanix on the map all those years ago.

Along with the iconic Mechanix aesthetic, The Original® Gloves offer superb dexterity and are extremely rugged, with a 0.8mm synthetic leather palm which works perfectly with touch screens, allowing you to stay connected while you work hard or play hard! The upper palm is made from Mechanix's proprietary TrekDry™ material, keeping your hands cool while wicking away sweat and moisture.

The Original® Gloves are secured with a Thermoplastic Rubber (TPR) wrist strap, keeping them firmly on and allowing for adjustment at the wrist. We are also treated to a robust carrier loop on each glove, allowing you to keep your gloves on your belt or tethered together using a carabiner, Grimloc or glove clip. For cycling, workwear, Airsoft and anything else, Mechanix The Original® Gloves are leaps and bounds above the rest!

If you're in search of the perfect middle ground between protection and dexterity, Mechanix M-Pact® 0.5mm Gloves are what you need. Boasting a seriously slick, aggressive look with Thermoplastic Rubber (TPR) knuckle and finger guards, M-Pact® 0.5mm Gloves also make use of Mechanix 0.5mm AX-Suede™ palms for a precision feel, touchscreen compatibility and a more intimate relationship with the controls of your Airsoft gun, motorbike or power tool. 

M-Pact® 0.5mm Gloves are absolutely bristling with thoughtful features, ideal for tactical applications, workwear, motocross and cycling. On each thumb, we have a polyester sweat wipe designed to allow you to wipe your brow without removing your glove. The trigger finger includes pre-stitched seams, designed to allow you to cut the finger off for improved trigger control and avoid material fraying. M-Pact® gloves are also machine washable and rated EN 13594 for impact protection, making them great for motorcycling and other activities which require extra protection for the knuckles and fingers. 

If you need hard-wearing, robust gloves with an aggressive yet discrete aesthetic, Mechanix M-Pact® 0.5mm Gloves are exactly that. Flawlessly made with advanced, proprietary materials and designed with plenty of well-thought-out features, there is a reason Mechanix M-Pact Gloves are so well regarded amongst real operators, motorcyclists, technicians and Airsofters alike!

An Alloy constructed Holographic Red Dot Sight designed for 20mm RIS/RAS, making it compatible with every Airsoft Gun with a 20mm/Picatinny rail. The sight provides a multi-function reticle with 10 levels of brightness adjustment and the choice of Red or Green illumination, allowing for both precise shooting and ultra-fast snap shooting.

An Alloy constructed "Holographic Red Dot Sight" which is designed for 20mm RIS/RAS, making it compatible with almost every Airsoft Gun. It has tactile Rubber buttons on the side to control the brightness and colour of the classic reticule which these sights are known for.

Looking for something to safely transport and store your expensive guns? Here you have it. Made from high-strength polymer with eggshell-style foam filling, the Rifle hard case from Evolution Airsoft has been specifically designed with Airsoft replicas in mind, providing the necessary protection without breaking the bank. 

If you're searching for a unique balaclava, the Ghost Anonymask Balaclava is a fantastic option! Made from lightweight polyester, this balaclava is a single-hole design with a Guy Fawkes-style look, perfect for fans of V for Vendetta or rebellious hackers. 

Balaclavas make great base layers for Airsoft face protection, especially in windy or cold weather. Whether you want your face protection to stand out or you're looking for something special to rock for a Halloween skirmish, the Ghost Anonymask Balaclava will give you a venerable, valiant veil as you violently vanquish villains! 

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

If you need a slight FPS boost but don't want to change your spring, the APS PUD Power-Up Muzzle Device is what you need! Constructed from alloy and compatible with any 14mm CCW male threaded outer barrel, this mock suppressor contains an inner barrel extension instead of the usual foam filling or tracer module. If installed correctly, this should boost FPS but your results will depend on your cylinder volume and other aspects of your internal setup. 

Compatibility-wise, the PUD is ideal for rifles and SMGs, mounting to 14mm CCW male threaded outer barrels. While it may fit, we don't recommend this device for GBB pistols due to its weight; this will reduce gas efficiency and risk damage to the barrel itself in tilting barrel pistol designs. If you're looking to squeeze a bit more FPS from your rifle or SMG build with minimal effort, the APS PUD Power-Up Muzzle Device was made with you in mind!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you're after ergonomic improvements for your AK, look no further than the CYMA Enhanced Pistol Grip for AK AEGs! This pistol grip is constructed from high density polymer with an ergonomic design and textured surfaces; a massive improvement over most stock AK grips. 

This grip is compatible with VFC spec AK AEGs, meaning it will fit CYMA CM.04x, CM.05x, Double Bell and Arcturus AK AEGs but won't fit AKs with the original TM AK-47 AEG build style (CYMA CM.028, CM.522, JG AK AEGs etc.). Whether you want to add a modern touch to your AK or you can't stand the original AK grip, this Enhanced Pistol Grip for AK AEGs will give your AK a new lease of life!

If you like to switch sling styles depending on the environment, the HASTA Adaptive Mission Sling Gen.3 has your back! This highly versatile sling mounts via locking crocodile clasps and can be quickly switched between a single-point and two-point configuration. 

To run it as a single-point sling, simply connect the locking clasp to the D-ring style loop on one end and mount the other clasp to your sling point. To use the Adaptive Mission Sling in a two-point config, simply disconnect the locking clasp from the D-ring and affix it to your second sling point. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments. 

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 146cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry. If you're after an affordable sling which works for multiple platforms and environments, the HASTA Adaptive Mission Sling Gen.3 does just that!

If you like to switch sling styles depending on the environment, the HASTA Adaptive Mission Sling Gen.3 has your back! This highly versatile sling mounts via locking crocodile clasps and can be quickly switched between a single-point and two-point configuration. 

To run it as a single-point sling, simply connect the locking clasp to the D-ring style loop on one end and mount the other clasp to your sling point. To use the Adaptive Mission Sling in a two-point config, simply disconnect the locking clasp from the D-ring and affix it to your second sling point. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments. 

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 146cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry. If you're after an affordable sling which works for multiple platforms and environments, the HASTA Adaptive Mission Sling Gen.3 does just that!

If you like to switch sling styles depending on the environment, the HASTA Adaptive Mission Sling Gen.3 has your back! This highly versatile sling mounts via locking crocodile clasps and can be quickly switched between a single-point and two-point configuration. 

To run it as a single-point sling, simply connect the locking clasp to the D-ring style loop on one end and mount the other clasp to your sling point. To use the Adaptive Mission Sling in a two-point config, simply disconnect the locking clasp from the D-ring and affix it to your second sling point. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments. 

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 146cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry. If you're after an affordable sling which works for multiple platforms and environments, the HASTA Adaptive Mission Sling Gen.3 does just that!

If you run a platform with QD sling sockets and want the ability to quickly switch between a single-point and two-point sling setup, the HASTA Adaptive Mission Sling Gen.4 will do the trick! Made using strong Nylon webbing, steel QD sling swivels and a mixture of alloy and polymer fittings, the Adaptive Mission Sling Gen.4 mounts to QD sling sockets found on many modern Airsoft platforms, allowing it to be disconnected quickly if you need to ditch your primary double time.

To run it as a single-point sling, simply connect the QD sling swivel to the socket on the alloy D-ring style loop on one end and mount the QD swivel to your platform's QD sling socket. To use the Adaptive Mission Sling in a two-point config, simply disconnect the QD swivel from the D-ring socket and affix it to the second QD socket on your platform. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments.

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 138cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry.

If you run a platform with QD sling sockets and want the ability to quickly switch between a single-point and two-point sling setup, the HASTA Adaptive Mission Sling Gen.4 will do the trick! Made using strong Nylon webbing, steel QD sling swivels and a mixture of alloy and polymer fittings, the Adaptive Mission Sling Gen.4 mounts to QD sling sockets found on many modern Airsoft platforms, allowing it to be disconnected quickly if you need to ditch your primary double time.

To run it as a single-point sling, simply connect the QD sling swivel to the socket on the alloy D-ring style loop on one end and mount the QD swivel to your platform's QD sling socket. To use the Adaptive Mission Sling in a two-point config, simply disconnect the QD swivel from the D-ring socket and affix it to the second QD socket on your platform. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments.

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 138cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry.

If you run a platform with QD sling sockets and want the ability to quickly switch between a single-point and two-point sling setup, the HASTA Adaptive Mission Sling Gen.4 will do the trick! Made using strong Nylon webbing, steel QD sling swivels and a mixture of alloy and polymer fittings, the Adaptive Mission Sling Gen.4 mounts to QD sling sockets found on many modern Airsoft platforms, allowing it to be disconnected quickly if you need to ditch your primary double time.

To run it as a single-point sling, simply connect the QD sling swivel to the socket on the alloy D-ring style loop on one end and mount the QD swivel to your platform's QD sling socket. To use the Adaptive Mission Sling in a two-point config, simply disconnect the QD swivel from the D-ring socket and affix it to the second QD socket on your platform. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments.

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 138cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry.

If you want to make your AK AEG easier to manipulate in game, this is the key! The CNC Aluminium Fire Selector for AK AEGs from 5KU is patterned after an enhanced selector design from the USA, boasting a unique look and extended surfaces to allow easy fire mode changes using your trigger finger. 

This means you can keep your hand on the pistol grip during mode changes, transforming the AK to be more inline with modern shooting techniques. The CNC Aluminium Fire Selector for AK AEGs should fit most AK AEGs but as always, a certain amount of expertise will be required to install it. If you want to switch modes faster while keeping your eyes on targets downrange, this enhanced fire selector will give you the edge you need!

Speed up your reloads with the 5KU CNC Aluminium Quick Release AK Magazine Catch! This machined aluminium Airsoft upgrade allows you to quickly release your magazine without having to take your finger off the trigger. The extended design sits under the trigger guard and provides you with a paddle that can be pressed down to defeat the magazine catch. However, it still provides the classic ambidextrous paddle on the bottom if you fancy an iconic mag flip reload every now and then.

This product is designed for CYMA AK platforms but may fit other brands with modification. It includes all the necessary screws and pins for installation. Enhance your battlefield experience with effortless magazine changes!

If you need a backpack with plenty of space, and we mean plenty of space, then the 8Fields Tactical 3-Day Assault Backpack; 36L is perfect for you! This massive bag, as stated by the title, is ready for 3 days' worth of kit, at least. This bag is packed full of storage space, exactly what you need for a long day of skirmishing.

Made from 1000D Polyester with a water-resistant PU finish, this multipurpose bag is compatible with hydration bladders thanks to its internal hook, hydration hose route and hose retainers on each of the dual shoulder straps. Each shoulder strap also features a polymer D-ring for carrying extra kit with carabiners and a stomach strap to distribute weight more effectively for improved comfort.

MOLLE Loops are present on the front pockets and the sides, meaning you can add extra capacity with MOLLE pouches when needed. The additional pouches that come preinstalled are fitted via MOLLE webbing and can be removed if you need a bit of extra agility on the battlefield. If you're looking for a bag that is easy to carry, with plenty of space and is perfect for both Airsoft and everyday use, the 8Fields Tactical 3-Day Assault Backpack; 36L is the bag for you!

If you need a backpack with plenty of space, and we mean plenty of space, then the 8Fields Tactical 3-Day Assault Backpack; 36L is perfect for you! This massive bag, as stated by the title, is ready for 3 days' worth of kit, at least. This bag is packed full of storage space, exactly what you need for a long day of skirmishing.

Made from 1000D Polyester with a water-resistant PU finish, this multipurpose bag is compatible with hydration bladders thanks to its internal hook, hydration hose route and hose retainers on each of the dual shoulder straps. Each shoulder strap also features a polymer D-ring for carrying extra kit with carabiners and a stomach strap to distribute weight more effectively for improved comfort.

MOLLE Loops are present on the front pockets and the sides, meaning you can add extra capacity with MOLLE pouches when needed. The additional pouches that come preinstalled are fitted via MOLLE webbing and can be removed if you need a bit of extra agility on the battlefield. If you're looking for a bag that is easy to carry, with plenty of space and is perfect for both Airsoft and everyday use, the 8Fields Tactical 3-Day Assault Backpack; 36L is the bag for you!

If you need a backpack with plenty of space, and we mean plenty of space, then the 8Fields Tactical 3-Day Assault Backpack; 36L is perfect for you! This massive bag, as stated by the title, is ready for 3 days' worth of kit, at least. This bag is packed full of storage space, exactly what you need for a long day of skirmishing.

Made from 1000D Polyester with a water-resistant PU finish, this multipurpose bag is compatible with hydration bladders thanks to its internal hook, hydration hose route and hose retainers on each of the dual shoulder straps. Each shoulder strap also features a polymer D-ring for carrying extra kit with carabiners and a stomach strap to distribute weight more effectively for improved comfort.

MOLLE Loops are present on the front pockets and the sides, meaning you can add extra capacity with MOLLE pouches when needed. The additional pouches that come preinstalled are fitted via MOLLE webbing and can be removed if you need a bit of extra agility on the battlefield. If you're looking for a bag that is easy to carry, with plenty of space and is perfect for both Airsoft and everyday use, the 8Fields Tactical 3-Day Assault Backpack; 36L is the bag for you!

If you need a backpack with plenty of space, and we mean plenty of space, then the 8Fields Tactical 3-Day Assault Backpack; 36L is perfect for you! This massive bag, as stated by the title, is ready for 3 days' worth of kit, at least. This bag is packed full of storage space, exactly what you need for a long day of skirmishing.

Made from 1000D Polyester with a water-resistant PU finish, this multipurpose bag is compatible with hydration bladders thanks to its internal hook, hydration hose route and hose retainers on each of the dual shoulder straps. Each shoulder strap also features a polymer D-ring for carrying extra kit with carabiners and a stomach strap to distribute weight more effectively for improved comfort.

MOLLE Loops are present on the front pockets and the sides, meaning you can add extra capacity with MOLLE pouches when needed. The additional pouches that come preinstalled are fitted via MOLLE webbing and can be removed if you need a bit of extra agility on the battlefield. If you're looking for a bag that is easy to carry, with plenty of space and is perfect for both Airsoft and everyday use, the 8Fields Tactical 3-Day Assault Backpack; 36L is the bag for you!

If you need a backpack with plenty of space, and we mean plenty of space, then the 8Fields Tactical 3-Day Assault Backpack; 36L is perfect for you! This massive bag, as stated by the title, is ready for 3 days' worth of kit, at least. This bag is packed full of storage space, exactly what you need for a long day of skirmishing.

Made from 1000D Polyester with a water-resistant PU finish, this multipurpose bag is compatible with hydration bladders thanks to its internal hook, hydration hose route and hose retainers on each of the dual shoulder straps. Each shoulder strap also features a polymer D-ring for carrying extra kit with carabiners and a stomach strap to distribute weight more effectively for improved comfort.

MOLLE Loops are present on the front pockets and the sides, meaning you can add extra capacity with MOLLE pouches when needed. The additional pouches that come preinstalled are fitted via MOLLE webbing and can be removed if you need a bit of extra agility on the battlefield. If you're looking for a bag that is easy to carry, with plenty of space and is perfect for both Airsoft and everyday use, the 8Fields Tactical 3-Day Assault Backpack; 36L is the bag for you!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!