Search results for 'inner barrel'

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

If your AEG needs a bit of extra accuracy to get the job done, a tightbore inner barrel will do the trick! This Stainless Steel Tightbore Inner Barrel from ZCI has a 6.02mm bore, meaning a slight rise in FPS using the same mainspring and improvements in accuracy at long range. 

These barrels are designed to fit any Tokyo Marui spec AEG and are constructed from stainless steel for maximum rigidity and to retain straightness in the long term. Ideal for an AEG DMR build or any other AEG-based build which requires accuracy and more long range performance, the ZCI Tightbore will have your AEG shooting at its very best!

If you want to start your Airsoft adventure with a realistic full metal platform or you have your eye on an MK18 MOD.1, the Delta Armory MK18 MOD.1 ALPHA™ should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups. 

Being an AEG of the ALPHA™ line, this MK18 MOD.1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. 

With more Picatinny rails than you'll ever need, a unique modern receiver design and the impressive Delta Armory battery stock, the MK18 MOD.1 ALPHA™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

If you put realism above all and appreciate an immersive firing experience, the Umarex BERETTA PMX will be an asset to your arsenal. This unique SMG was only revealed in the real steel world a handful of years ago and is derived from the iconic Beretta M12 SMG but redressed for 21st-century combat.

The PMX boasts ambidextrous controls across the design, a high density polymer upper and lower receiver with an aluminium sub-receiver, ambidextrous steel sling points and the front and rear and a rock solid side folding stock which combines the best aspects of other folding stock designs. The highlight of the PMX is its gas blowback action, providing immersive recoil with each shot and a 100% realistic manual of arms, meaning racking the charging handle before the first shot and hitting the bolt catch after a satisfying reload. If you love the challenge of working a GBBR under pressure and appreciate snappy and violent recoil, you'll love the Umarex BERETTA PMX.

The Master Mod R-Hop Inner Barrel Set is a revolutionary design allowing you to install the set with ease in either your AEG or your GBBR! Yes that's right, it works in both. It's time to upgrade your airsoft gun with the high quality internals it deserves.

The Master Mod R-Hop Inner Barrel Set is a revolutionary design allowing you to install the set with ease in either your AEG or your GBBR! Yes that's right, it works in both. It's time to upgrade your airsoft gun with the high quality internals it deserves.

If you are looking for a lightning-fast PDW which marries superb build quality and impressive internals with licenced trademarks, check out the EMG TROY SOCC PDW M4/AR-15 AEG! This compact, full-metal AR platform boasts full licenced trademarks from Troy Industries and a slick modern design at the cutting edge of ergonomics. 

The handguard is a fantastic replica of the real steel Troy 7.6" M-LOK handguard, the muzzle device is a dead-on match for the hyper-aggressive Troy Medieval Flash Suppressor and the stock is based on the real steel SB Tactical SBA3 Brace but with a rubber butt plate so it can be shouldered like a proper stock. Those who like the latest civilian tactical platforms from the real steel world are going to love this!

On the inside, things are equally impressive, boasting a pre-upgraded version 2 gearbox fitted with 8mm bushings, a polymer piston with a full steel tooth rack, steel ball-bearing spring guide and an in-line MOSFET to improve trigger response, electrical efficiency and trigger contact lifespan. If a compact AR is on the cards for your next purchase and you like the elite real steel look, the TROY SOCC PDW should suit you perfectly!

If you have a sneaky playstyle a MK23 belongs in your arsenal! This phenomenally quiet Airsoft NBB pistol has been the sidearm of choice for Airsoft snipers since it was released, and it isn't hard to see why! 

The MK23 is super quiet thanks to its non-blowback action, and is exceptionally accurate and long ranged for a pistol in this price bracket. For those who simply must upgrade every Airsoft gun they own, the MK23 is compatible with VSR-10 style inner barrels and HOP-up buckings, meaning the accuracy potential for this pistol is practically limitless! 

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

If you are looking to get the absolute maximum performance from your VSR, Action Army has got you covered. This 6.01mm Tightbore inner barrel is constructed from stainless steel and features a flawless internal finish for perfect shots every time. The 6.01mm is one of the tightest possible inner barrels that can be installed to get the most potential from your rifle and stay ahead of the competition.

The barrel measures 430mm and can be any rifle with a VSR-compatible HOP up, for those of you wanting to improve the air seal and overall efficiency of your rifle. With the barrel being so tight, make sure to keep it clean for maximum performance.

If your collection is missing a shotgun, now would be the time! The CYMA CM.360LM M3 Super 90 Long is based on the legendary Tokyo Marui tri-shot shotgun design but with full metal construction and a few added details to refresh the old but proven tri-shot design. This is the Long variant of the M3 Super 90, known amongst Airsofters for its role in the movie Heat (1995) and known in the real steel world as one of the most advanced and high quality military/law enforcement shotguns ever devised.

Working with a shotgun, whether you are indoors or outdoors, has its own set of challenges; ideal for the CQB pro who is bored of getting easy kills with their AEG. Like the sniper in the woods, the shotgun-wielding skirmisher must choose their shots and time their reloads just right, though the shotgun provides the advantage of having a higher hit probability thanks to its tri-shot configuration and a faster first shot when entering a room. If you are ready to get your pump on, you can't do much better than CYMA's full metal tri-shot range!

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

A kit which allows you to increase your FPS and Accuracy of your Gas Blowback WE Europe Pistols by extending your Pistol's Inner barrel.

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.

If you are looking for a pump action shotgun to lay down the law in CQB this is one of our favourites! The CM.360M M3 Super 90 from CYMA is a spring-powered pump action shotgun which uses the Tokyo Marui Tri-shot system, meaning with each trigger pull you get 3 BBs headed downrange from 3 separate inner barrels, improving hit probability by providing a shotgun-like spread pattern.

We have seen Tri-shot shotguns before, and even M3 Super 90 style ones, so what makes this so special? Well, it is full metal, giving it a solid feel in the hands and a decent but not over-the-top weight, and CYMA has added a few frills to this ancient TM design to add extra realism for those that seek it, most notably the moving mock bolt carrier and charging handle, which has been omitted from Airsoft M3 Super 90 shotguns until now. If you have a taste for realism and you need a spring tri-shot to expand your arsenal this would be a great pick!

An upgrade Airsoft 6mm BB Gun Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units. The barrel is constructed from Alloy, then Hard Coated via an Anodising Process.

A replica of the MC51 rifle with a 20mm Picatinny railed handguard to give the old gun a fresh feel and bring it into the modern era. The Picatinny handguard allows mounting of all manner of accessories and the rifle comes complete with a receiver scope mount; this thing is just begging to be laden down with mission essentials!

Upgrade your M4/M16 AEG. with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 301 to 400mm.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

Upgrade your M4/M16 AEG. with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 451 to 550mm.

For those of you that like going Commando! Lancer's M933 is a replica of the lesser-seen Commando length M4/AR15, rocking a tightbore inner barrel, quick change spring system and threaded outer barrel as well as adjustable stock and removable railed sights. Bridging the gap between outdoor and CQB environments.

Upgrade your AEG with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder is constructed from high-strength steel and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 251 to 330mm.

This is for you techies looking to get the maximum performance from your VSR or gas blowback Airsoft rifle. This Prometheus inner barrel is 370mm in length and 6.00mm in diameter, that's right - 6.00mm! Truly the tightest of bores!

Prometheus is a well known brand that has been in the Airsoft game for a long time and the quality has always stood at a consistently high level.

Constructed from stainless steel and, the small diameter reduces as much possible air loss and allows for maximum performance and a higher FPS to be reached, although check with your site's FPS limit before bringing your newly upgraded Airsoft rifle to skirmish. Due to the minimal diameter of this barrel, make sure to use high-quality BBs such as the G&G BB range, to avoid potential jamming of BBs.

Whether you are a fan of Novritsch or you just appreciate a fantastically performing Airsoft pistol, the SSP18 is one to watch! This full metal GBB pistol is designed by Novritsch's team in Vienna, Austria, and boasts some of the most essential enhancements an EU18 platform needs to perform at its best.

Inside, you will find a 6.01mm tightbore inner barrel which is stabilised with O-rings and sits inside a fixed FXB outer barrel. This means the realistic tilting barrel action of the EU18 is gone, but in its place comes accuracy and range a normal EU18 can only dream of. The pre-installed HOP-up bucking is the exceptional Maple Leaf Autobot 50° bucking, providing an incredibly strong HOP-up effect suitable for 0.32g BBs and higher. To make things all the sweeter, the SSP18 definitely stands out next to a comparatively boring EU18, boasting a redesigned "Timberwolf" style frame, serrated and ported slide and a light enhancing front iron sight.

With unique and eye-catching looks, phenomenal range and accuracy and fully automatic capability, the SSP18 can do it all and will be equally effective both up close and at long range!