All Airsoft Gas Blowback Internal Parts

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you have a pile of leaky mags, now is the time to fix them up! The WADSN Gas Magazine O-ring Repair Set includes 10 O-rings of 7 different sizes, designed to replace the O-rings of the knocker valve and fill valve in most Airsoft gas magazines. The set is supplied in a clear polymer organiser case to keep everything neat and includes a set of polymer installation tweezers to make installation without damaging the O-rings considerably easier. If you have a lot of leaky mags gathering dust, this set is the key to giving them a new lease of life!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.

If you have dropped a mag mid game you probably have a set of broken feed lips, but fear not! The Army Armament Magazine Feed Lips for Hi-capa GBB is designed to replace the original feed lips of AA Hi-capa magazines whether they are cracked from an accidental drop or just getting a bit worn out. 

The Army Armament Green Gas Valve Kit for AA Hi-capa & 1911 GBB is what you need if your magazine leaks from the fill valve or knocker valve. The set includes replacements for both, complete with pre-installed rubber O-rings. 

This set should be suitable for most Hi-capa and 1911 GBB pistol magazines but is specifically designed for Army Armament R26, R27, R28, R29, R31, R32, R45, R501, R601, R603 & R604 magazines. We recommend a valve key for easy installation. Breath new life into your pistol or save money fixing an old mag instead of replacing it!

If you want to upgrade your Umarex Glock and build a sleeper of a long ranged pistol setup, this is the HOP-up unit you need! The Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is compatible with the Umarex/VFC Glock 17 Gen.5, Glock 19 Gen.4, Glock 19X and Glock 45 GBB pistols and is constructed from alloy for improved strength. The unit is supplied with two HOP-up arms with one pre-installed, giving you a spare to keep handy or modify for some experimental HOP-up setups. 

The tolerances of this unit are far more precise than the original, offering better air seal and gas efficiency, translating into better effect on target and better consistency. If you want to shock the enemy by landing a hit with your pistol at long range, the Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is the key!

A silicone rubber seal designed to fit on the bottom of your Hi Capa magazine internally, to replace old and work out seals and reduce leaks. With a properly fit and lubricated seal you should never experience a leak again, just ensure you coat the seal in silicone based lubricant prior to fitting it, and be gentle! These things may snap under too much tension.

If you've got some old MWS, CGS or Hi-Capa mags to refurbish, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve is what you need! This set is a complete replacement original knocker valve (aka output valve), the valve at the top of the magazine which is struck by the valve knocker. 

Compatibility-wise, this should fit Tokyo Marui MWS ZET System Mags, CYMA CGS GBBR magazines, Tokyo Marui Hi-Capa mags and some TM clone Hi-Capa magazines (though this is not guaranteed). Whether you like to keep spares on hand so you're always battle-ready or your mags are a bit tired and need a revamp, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve will do the trick!

If you want to take pure advantage of the inherent modularity of the VORSK VMP-2, these Complete Trigger Groups are the key! Available in semi-auto only for DMR builds or select fire (semi/full auto) for assault rifle setups, the VORSK Complete Trigger Group for VMP-2 Series is constructed from alloy with steel springs, pins and screws.

If you're rocking the VMP-2D or VMP-2MD, the select fire version will allow you to convert your DMR into an assault rifle, though you'll also need a low power nozzle to keep your build site legal. Installing the semi-auto only version in the VMP-2M will lock it to semi-auto, allowing you to pop a high power nozzle inside and run it as a compact DMR!

Each trigger group comes pre-built and equipped with ambidextrous fire controls, making it an almost literal "drop in" installation. No need to fiddle with small springs and awkward little screws installing these! Despite the super easy installation, any internal modification made will void the VMP-2's original 12-month warranty so we only recommend these for the pros!

If you're building out your Shadow 2 GBB and seeking more accuracy, the Maple Leaf Complete HOP-Up Chamber for KJW/ASG Shadow 2 GBB is an easy way to get there! This complete HOP-up chamber group is practically a drop-in fit and pre-built so you don't have to do any of the fiddly stuff!

The set includes a Maple Leaf 6.02mm Tightbore inner barrel made from stainless steel, the Maple Leaf HOP-up chamber and a Maple Leaf Autobot 60° HOP-up bucking paired with the much-lauded Maple Leaf I-Key. Compatibility-wise, the Complete HOP-Up Chamber should work flawlessly with both ASG and KJ Works CZ Shadow 2 GBB pistols. Installing this set should boost FPS and gas efficiency slightly thanks to tighter tolerances, improve accuracy potential and extend range, giving your sidearm-sized platform a primary-like punch!

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength. 

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines. 

If your Tokyo Marui ZET system M4/AR-15 needs some steel to keep it strong, the CYMA CGS Adjustable Trigger Box for TM ZET System M4/AR-15 GBBR belongs on your shopping list! This complete trigger box is ready to drop in and contains full steel trigger components which should last practically forever in normal use. The box is compatible with both CYMA's CGS M4/AR-15 GBBR series and Tokyo Marui ZET system M4/AR-15 GBBRs. 

Along with its steel construction, the extra perk of this box is its ability to adjust the hammer stroke strength, translating into adjustable FPS by varying the force with which the hammer strikes the valve knocker. As always, we recommend internal upgrades only for those who are confident in how to install them, but with this trigger box being pre-built, most of the hard work has been done for you!