Airsoft Under £75

The Patrol Base Airsoft Gift Card has no set value so that you can pick larger values as you require them!

As the time approaches for birthdays, Christmas and special occasion gifts, it can be a bit nerve-wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique bunch; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it!

We've created our Airsoft Gift Card for this very situation. These can be purchased and redeemed against any product offered on our website or in our showroom. Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they're saving up for!

For Terms and Conditions please see our Terms and Conditions Page.

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

This Pre-Two Toned Pistol from Vorsk is another in a long line up of high quality Airsoft Replicas that are pre-painted, so that beginners don't need to wait whilst we paint their Gun, and can be ordered without any Airsoft Defence or Membership. It is constructed to a realistic standard using Alloy and Polymer, and features awesome custom external furniture that is a cut above competing out-of-the-box Pistols. If you're a beginner with your heart set on a 1911 Platform Gas Blowback Airsoft Pistol, then this is a very good choice indeed.

If you're after a realistic, compact tracer unit with muzzle flash functionality, the Strike Industries Linear Compensator; FLARE Mono Tracer from EMG is the way to go! A licensed design based on the real steel Strike Industries Pistol Linear Compensator and Oppressor Universal Blast Shield, this Linear Comp is rocking Strike Industries' trademarks across the design, ideal for realism fans!

Inside, the Linear Comp is fitted with the internals from EShooter's Flare Mono tracer unit, offering muzzle flash and tracer functionality, a "shake to wake" mode, an internal rechargeable battery and the ability to mount to either 14mm CCW male barrel threads or 11mm CW female barrel threads using the included adapter. If you're after a highly functional muzzle flash tracer which looks the business on either a pistol or rifle platform, the EMG Strike Industries Linear Compensator; FLARE Mono Tracer is a fantastic choice!

A full metal M203 style Airsoft Grenade Launcher by Double Bell, designed to fit onto either a 20mm RIS rail or the underside of your M4A1 / M16 this 203 launcher adds a uniquely menacing look to your gun!

If you want some awesome, realistic-looking 5.56 mags and you're running a CYMA CGS or TM MWS system GBBR, you should check these out! The EMG 30rnd 5.56 Style Magazine for CGS & MWS GBBRs is compatible with both the CYMA CGS and Tokyo Marui MWS M4 systems. It is a green gas magazine, and the fill valve is on the bottom of the polymer Lancer Systems L5 AWM Magazine-style body.

This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these magazines include the bolt stop components, which lock the bolt open at the end of a magazine, and each magazine holds 30 BBs.

If you want some awesome, realistic-looking 5.56 mags and you're running a CYMA CGS or TM MWS system GBBR, you should check these out! The EMG 30rnd 5.56 Style Magazine for CGS & MWS GBBRs is compatible with both the CYMA CGS and Tokyo Marui MWS M4 systems. It is a green gas magazine, and the fill valve is on the bottom of the polymer Lancer Systems L5 AWM Magazine-style body.

This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these magazines include the bolt stop components, which lock the bolt open at the end of a magazine, and each magazine holds 30 BBs.

If your primary has a 1913/20mm Picatinny stock adapter and you like the idea of a folding stock, the Airsoft Artisan 1913/20mm Picatinny M4/AR-15 Folding Stock Tube Adapter is exactly what you need. This high-quality aluminium adapter comes with a steel mounting bolt and buffer tube.

The buffer tube is machined to allow for wire routing in rear-wired setups. The main perk of this stock adapter is its low weight, tipping the scales at 323g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock-equipped AEG or GBBR, this is perfect for the job!

If your primary has a 1913/20mm Picatinny stock adapter and you like the idea of a folding stock, the Airsoft Artisan 1913/20mm Picatinny M4/AR-15 Folding Stock Tube Adapter is exactly what you need. This high-quality aluminium adapter comes with a steel mounting bolt and buffer tube.

The buffer tube is machined to allow for wire routing in rear-wired setups. The main perk of this stock adapter is its low weight, tipping the scales at 323g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock-equipped AEG or GBBR, this is perfect for the job!

If you're looking for a way to enhance your AK, AR36, AUG or SMG-5K AEG, the GATE ASTER™ SE V3 MOSFET; Expert Firmware is a fantastic option for a reasonable price! This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes, and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

It offers a fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™, so if you're not confident, we suggest seeking a technician to carry out the installation process for you. This, the V3 model, is intended for version 3 AEG gearboxes found in AK, AR36, AUG and SMG-5K AEGs. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

If you're after a compact, lightweight pistol flashlight which doesn't compromise on functionality, the WADSN SS Foxtrot2R Pistol Flashlight is a great option. Made with an aluminium housing, steel mounting bolt and polymer activation switches, the Foxtrot2R mounts to 20mm Picatinny rails, equipped with ambidextrous rocker switches which provide momentary on, constant on and strobe mode. 

The unit is powered by a single CR123A cell (not included) and also features a safety/lockout mode, helping you maintain light discipline and save battery power. The set also includes an alternative rail adapter for G-series and other off-spec rails, along with a set of alternative switch paddles so you can perfect ergonomics with whatever pistol it's living on. If you're seeking a slim, modern tactical flashlight with all the functionality of bigger units, the WADSN SS Foxtrot2R Pistol Flashlight will do the trick!

If you're after a compact, lightweight pistol flashlight which doesn't compromise on functionality, the WADSN SS Foxtrot2R Pistol Flashlight is a great option. Made with an aluminium housing, steel mounting bolt and polymer activation switches, the Foxtrot2R mounts to 20mm Picatinny rails, equipped with ambidextrous rocker switches which provide momentary on, constant on and strobe mode. 

The unit is powered by a single CR123A cell (not included) and also features a safety/lockout mode, helping you maintain light discipline and save battery power. The set also includes an alternative rail adapter for G-series and other off-spec rails, along with a set of alternative switch paddles so you can perfect ergonomics with whatever pistol it's living on. If you're seeking a slim, modern tactical flashlight with all the functionality of bigger units, the WADSN SS Foxtrot2R Pistol Flashlight will do the trick!

If you're wielding a spring or gas-powered tri-shot shotgun and need a battle-ready loadout, the Tri-Shot Shotgunner Starter Rig is the way to go! This set includes the 8Fields Tactical MOLLE Plate Carrier Vest w/ Mock Insert, 3 x 5-round Shotgun Shell Panels for MOLLE webbing and 3 packs of 6 30-round Shotgun shell magazines, giving you the protection needed to cope with stinging close-range shots with enough shells on tap that you'll never need to faff around with a speed loader in the thick of it. 

If you want to personalise your new rig, see our range of Morale and ID patches to add a touch of humour and personality. If you need assistance mounting your MOLLE pouch to your plate carrier, check out our MOLLE Guide.

If you want a real-steel look with adjustable length, the EMG Gemtech Lunar 9 Mock Suppressor is a great choice for pistols, DMRs, and everything in between. Made from CNC-machined aluminium, it features faithfully reproduced Gemtech trademarks and a branded Gemtech logo end cap.

Sleek yet aggressive in design, the Lunar 9 looks right at home on 9mm and .300 Blackout platforms, though being airsoft, anything goes. The suppressor’s length is adjustable by removing the front section and refitting the Gemtech front cap, giving you a full length of 19cm or a compact 13cm configuration.

Both setups offer enough internal space to house a tracer unit, making it ideal for CQB and low-light games. It mounts to the common 14mm CCW, making it appropriate for any Airsoft platform from pistols to DMRs!

If you're styling up your SCAR and need more stock options, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG should be on your shopping list! Made from flawlessly machined aluminium with a hard-wearing anodised finish applied, this adapter fits WE and VFC SCAR replicas, both the L and H models, in both GBBR and AEG flavour.

The set includes the adapter itself, with integral QD sling sockets on each side, and a GBBR-style buffer tube with a steel castle nut. The included buffer tube offers 6 adjustment positions and should fit most M4/AR-15 sliding stocks on the market. If you're sick of the Ugg boot stock and want all the options under the sun for your SCAR, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG will do the trick!

If you're styling up your SCAR and need more stock options, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG should be on your shopping list! Made from flawlessly machined aluminium with a hard-wearing anodised finish applied, this adapter fits WE and VFC SCAR replicas, both the L and H models, in both GBBR and AEG flavour.

The set includes the adapter itself, with integral QD sling sockets on each side, and a GBBR-style buffer tube with a steel castle nut. The included buffer tube offers 6 adjustment positions and should fit most M4/AR-15 sliding stocks on the market. If you're sick of the Ugg boot stock and want all the options under the sun for your SCAR, the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG will do the trick!

If your CM.098 lower receiver is looking worse for wear, this original replacement will have it looking factory-fresh! The CYMA Alloy Lower Receiver for CM.098 AEG is made from alloy, packaged with a magazine release, bolt catch and ambidextrous fire selectors. 

Compatibility-wise, this lower is designed specifically for the CM.098 AEG series and is unlikely to work with other brands' SR-25 AEGs. Whether your lower is a bit scratched or it's taken a massive impact and cracked, the CYMA Alloy Lower Receiver for CM.098 AEG is the key to fixing it up!

If you are sick and tired of your goggles fogging at a critical moment, here is the solution! The ExFog XT Antifog System is a revolutionary anti-fog device designed to attach to helmets in its basic form, but can also be worn as a headband setup. The Exfog Cold Air Unit will provide constant cold air to your lenses to stop fogging of your goggles or helmet via food-grade PVC tubes and has an adjustable fan speed so you can adjust the anti-fog effect to suit the situation.

This is the newest generation of ExFog Cold Air Unit, known as the "XT". The new unit is more powerful than before with the same low noise performance, and now charges via USB-Type C. The XT version also includes the ExFog Universal Magnetic Goggle Adapters, so you can easily remove your goggles from the unit in seconds, with no need for tools.

Power is provided by an internal rechargeable battery, and the device mounts via a choice of velcro or the Tband or Headband kit. If you want goggle fogging to be a thing of the past, the Exfog is one of the few devices which guarantee this!

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A CO2 Gas Blowback Airsoft Pistol, which is a stunning replica of the Desert Eagle .50AE, and is made to the usual high standard that Cyber Gun pride themselves on. Officially licensed and made using Alloy with a brushed steel effect, this Pistol feels great and kicks like an absolute Mule. This is NOT one to miss.

If you're in the market for a micro tracer unit but you want muzzle flash, the Eshooter FLARE M Tracer Unit with Muzzle Flash is your best bet. This ultra-compact tracer unit rivals the smallest on the market, measuring approximately 5.4cm long with a 2.8cm diameter and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE M is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE M is intended to be mounted on 14mm CCW male threaded outer barrels and includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare M. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter and you can rock the FLARE M too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE M charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE M is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

If you're done with ringing ears after taking a grenade hit, the EARMOR M32 Plus MOD3 Electronic Communication Headset is what you need. This headset not only looks the business but offers active hearing protection and communications functionality, allowing you to hear your environment clearly while staying protected against loud bangs.

Active noise cancellation reduces the volume of sudden, loud bangs and increases the volume of environmental noises, making this headset the perfect countermeasure for a grenade-happy enemy team. The M32 Plus also offers Communications functionality when combined with the EARMOR M52 PTT and a radio. This means that you will be able to hear the whispers of the enemy team in the next room but if a grenade comes around the corner your ears will be well protected, subject to nothing more than a dull thud. Even if you don't run comms, active noise cancellation is the ideal counter to grenades in tight spaces!