- IP67 Waterproof
- Pressure Equaliser
- Pick and Pluck Foam
If you need an indestructible Laptop/Tablet Case for every day use that can survive the harshest environments, including Temperatures from -20°C to 90°C, submersion in water up to 1m for 30 minutes, and with protection from Dust, Extreme Temperatures and Pressure, then the Hammerhead Tablet Case with Carry Strap is just the thing.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Hammerhead Waterproof Tablet Case is designed to be indestructible but also easy to carry, and has been thoroughly tested by third party quality-assurance company Intertek. With an IP67 Waterproof Rating, full protection from the ingress of Dust, Extreme Temperature and Impacts, as well as a valve to control the internal pressure of the case without compromising its' waterproof seal, this is the ultimate Tablet Case for those who need peace of mind.
The Hammerhead Case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with a thick pick and pluck layer, allowing you to customise the shape of the foam to achieve the perfect fit around your Tablet. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to keep their Tablet in perfect condition, even when rough handling from say, Airport Ground Crews is involved.
The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.
The case features a large heavy duty front clasp that snaps to lock the case shut, and has integrated slots on either side for the use of padlocks, should you want to keep the contents free from prying eyes. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.
The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.
If you need total piece of mind when transporting, carrying or storing your Tablet; whether you're scaling the Himalayas, sailing the Bahamas or navigating the flora and fauna of Gatwick Airport, then the Hammerhead Waterproof Tablet Case won't let you down.
Features
- Design to protect Tablets
- Convenient Carry Strap
- Ideal for travelling or everyday use
- Tablets sized ABS hard case
- Great for compact, long term storage
- Eggshell foam lid insert
- Pick and Pluck storage insert
- Base separator foam piece protection
- Easily slides under beds, or fits in cupboards
- IP Rated up to IP 67
- Dust Tight Case to protect the contents
- Protected against water submersion up to 1m for 30 mins
- Rubber seal for an extra tight seal when closed
- Secured using single large clasp
- Padlock holes for securing case
- Impact Resistant
- Protects in low temperatures down to -40°c
- Protects in high temperatures up to 90°c
- Stainless steel hinge pins
- Manual pressure air valve which resists water
- Heavy Duty ABS construction
- Transport equipment with peace of mind
Package Includes
- PARRA No. 291 Hammerhead Waterproof Tablet Case
- Egg-shell foam lid insert
- Foam Separator base insert
- Pick-Pluck foam storage insert
Specification
General
|
Black
|
---|---|
|
ABS
|
Product Length
|
Approx. 32.8cm
|
Product Width
|
Approx. 23.9cm
|
Product Height
|
Approx. 4.5cm
|
Case Related
General
|
Tablets
|
---|
Case Features
Ratings
|
IP67
|
---|---|
|
Intertek
|
|
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
|
Protection
|
Waterproof
|
---|---|
|
Yes
|
|
Yes
|
|
-20°c
|
|
90°c
|
Padding
|
Yes
|
---|---|
|
Soft Foam
|
|
|
Latches
|
Single Movement Clasp
|
---|---|
|
1
|
Handles
|
No
|
---|
Wheels
|
No
|
---|
Dimensions & Weight
Weight
|
Approx. 0.75kg
|
---|---|
|
0.792kg
|
External
|
Approx.32.8cm
|
---|---|
|
Approx.23.9cm
|
|
Approx.4.5cm
|
Internal
|
Approx.5.61mm
|
---|
Base
|
Approx.1.9cm
|
---|---|
|
Approx.30.5cm
|
|
Approx.22.5cm
|
|
Approx.31.6cm
|
|
Approx.23.3cm
|
Lid
|
Approx.2cm
|
---|---|
|
Approx.30.2cm
|
|
Approx.23.7cm
|
|
Approx.31.5cm
|
|
Approx.23.3cm
|