PARRA No. 9374 Sabre Waterproof Hard Case

PARRA
Code: PRA-937
£134.99
  • Pick & Pluck Foam
  • Third Party Certified
  • IP67 Water / Dustproof

This tough Hard Case is designed for longer items like Rifles and Shotguns, but can be put to any use thanks to the Pick and Pluck Foam inside, which is made to be cut to shape and perfectly protect your items by offering them the perfect slot to sit in. The Polypropylene (PP) and Glass Fibre mix used for construction makes it resistant to crushing, impacts and even extreme temperatures from -40°C to 90°C, but is still lightweight enough to easily carry (or wheel) around with you.

Full description

Description

The Sabre Waterproof Hard Case is an extremely large Rifle Case made from very tough Polypropylene (PP) and Glass Fibre mix material which is the secret to its' Impact and Extreme Temperature resistant design, but is also a lightweight compound that makes this Case easy to move around. The external design of the Case is such that it is very easy to stack multiple Cases together, and a set of Integrated Wheels and Grab Handles makes them very easy to manoeuvre about. Inside the Case is multiple Pick and Pluck Foam layers, meaning you can cut out slots for your equipment to sit in, and stop them moving about in transit. The edge of the Case has a Rubber Seal that protects the contents from the ingress of Water (1m up to 30 minutes) and Dust. A Pressure-Relief Valve can also be found to control the internal Pressure of the Case without compromising the Waterproof Seal.

The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with two thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as a large collection of Scopes and Magazines sat next to your Rifle.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with six strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features four pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

Whether you need to safely transport, store or protect your Firearms, or you're looking for a Hard Case that can fit a huge variety of kit inside, whilst also protecting the contents from everything the environment has to offer, then the Sabre Waterproof Hard Case is the one for you.

Features

  • Perfect for Rifles and Shotguns
  • Ideal for the travelling shooter
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Two Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using six dual movement clasps
  • Folding low profile carry handle
  • Integrated Travel Wheels
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) and Glass Fibre mix construction
  • Transport equipment with peace of mind

Package Includes

  • No. 9374 Sabre Waterproof Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Two Pick-Pluck foam storage inserts

Specification

General

Colour Wheel Greyscale
Item Colour
Black
Material Icon
Material
  • Polypropylene
  • Fiberglass
Product Length
Approx. 119cm
Product Width
Approx. 53cm
Product Height
Approx. 21cm

Case Related

General

Recommended For
  • Assault Rifle
  • Shotgun
  • Sniper Rifle
  • Pistol
  • Light Machinegun
  • Submachine Gun
  • Helmet
  • Rigs / Vests
  • Tools
  • Camera
  • Drones & Equipment
  • Sights
  • Attatchments
  • Riflescopes

Case Features

Ratings
IP Rating
IP67
Certificate Issuer
Intertek
Certificates
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
Protection
Waterproofing
Icon - Waterproof
Waterproof
Dust Proof
Yes
Crush Proof
Yes
Shockproof
Yes
Air Valve
Yes
Rubber Seal
Yes
Minimum Temperature
-40°c
Maximum Temperature
90°c
Padding
Padded
Yes
Padding Material
Soft Foam
Padding Type
  • Pick and Pluck Foam
  • Egg Shell Foam Lid Insert
  • Thin Base Separator Padding
Latches
Latch Types
Dual Movement Clasp
Latch Count
6
Handles
Grab Handle
Yes
Handle Type
Folding Carry Handle
Wheels
Has Wheels
Yes
Wheel Count
2
Security
Security Features
Padlock Holes

Dimensions & Weight

Weight
Weight KG Icon
Weight (KG)
Approx. 8.9kg
External
External Length
Approx.119cm
External Width
Approx.53cm
External Height
Approx.21cm
Internal
Internal Corner Radius
Approx.25mm
Base
Base Internal Depth
Approx.12cm
Base Internal Lower Length
Approx.112cm
Base Internal Lower Width
Approx.46.5cm
Base Upper Length
Approx.112cm
Base Upper Width
Approx.46.5cm
Lid
Lid Internal Depth
Approx.6cm
Lid Lower Length
Approx.112cm
Lid Lower Width
Approx.46.5cm
Lid Upper Length
Approx.112cm
Lid Upper Width
Approx.46.5cm

Need ideas for something extra?