Refine results
Refine by
Viewing 60 of 201.
grid
list
£8.99
  • Alloy construction
  • Provides a 20mm Picatinny rail
  • For CYMA CM.039 & CM.039C Only

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

£29.99
  • Ergonomic Design
  • For 20mm RIS / RAS Rails
  • Officially licensed CQR Grip

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

£29.99
  • Ergonomic Design
  • For 20mm RIS / RAS Rails
  • Officially licensed CQR Grip

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

£34.99
  • Alloy construction
  • 20mm Picatinny rail & iron sights
  • For Novritsch SSR63 & AR36 AEGs
If you want to meet the man behind the Novritsch YouTube channel and the fantastic Novritsch Airsoft gun range, now is your chance! See our blog for more information.

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

£59.99
  • M-LOK Handguard, outer & inner barrel set
  • Compatible with Novritsch SSR63 A2 and SSR63 A3
  • Perfect for CQB and aggressive skirmishers
If you want to meet the man behind the Novritsch YouTube channel and the fantastic Novritsch Airsoft gun range, now is your chance! See our blog for more information.

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

£74.99
  • CNC Aluminium chassis
  • USW-style folding stock
  • For Novritsch SSP18 GBB Pistol
If you want to meet the man behind the Novritsch YouTube channel and the fantastic Novritsch Airsoft gun range, now is your chance! See our blog for more information.

If you want to take pure advantage of the upgraded internals of your SSP18 GBB, the Novritsch Minimalist Carbine Kit is what you need! This setup adds a CNC aluminium chassis to the SSP18 GBB pistol with a 20mm Picatinny rail up top, a high-density polymer side folding USW-style stock and a holster lug for the Novritsch Universal Holster on the left side.

This transforms the SSP18 from an impressive pistol into a uniquely functional GBB SMG with holster compatibility and the ability to mount a red dot sight or scope. The addition of a stock alone will allow for more accurate long-range shots and allow upgraded internals of the SSP18 to really shine through. Whether it is a sidearm or your primary, the Minimalist Carbine Kit paired with the SSP18 GBB is a phenomenal combination!

£3.99
  • QD system
  • Swivel adaptor
  • 20mm RIS / RAS system

MGP brings us a high quality Quick Detach (QD) sling adaptor, allowing you to connect your weapon of choice to a sling. The QD system is locked in place by 4 steel ball bearings which are lowered with a push of the centre button to lock in place and release, again by pressing down the same button.

This version supports 20mm RIS / RAS rail system. Simply loosely screw the fixtures together using the Allen key included, then slide them onto your RIS rail, then tighten to lock the fixture in place and voila! Now you can attach and detach your sling swivel with ease, allowing for a dynamic and efficient playstyle on the battlefield.

No more unslinging your rifle from your back or shoulders!

£4.99
  • Thumb Rest
  • For 20mm RIS
  • Allen Key Mount

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

£4.99
  • Vertical Grip
  • No Tools Required
  • Simple & Comfortable

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

£4.99
Was £6.99
Save £2.00
  • Vertical Foregrip
  • Bottom Screw Tightens
  • Tightly Locks into Place

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

£4.99
  • High density polymer construction
  • Folding grip - Use as a vertical or horizontal grip
  • Mount to 20mm Picatinny rails 

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

£5.95
  • For EOTech
  • Transparent
  • Protect Sights

A transparent Polymer lens protector designed for EOTech Style Sights, protecting your Sight from BB's and other projectiles designed as a first defence, protecting your lens.

£5.99
  • Rail Riser
  • 3.1cm Raise
  • 20mm RIS/RAS

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

£5.99
  • Low Profile Rings
  • For 25mm Optics
  • Fits 20mm RIS/RAS

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

£5.99
  • For 25mm Optics
  • Slim Profile Rings
  • High Profile Mounts

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

£5.99
  • 20mm Picatinny rail riser
  • 0.83"/2.2cm rail-to-rail height
  • Get a better view down your red dot!

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

£6.99
  • Folding Foregrip
  • Side Screw Tightens
  • Tightly Locks into Place

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

£7.99
  • Pack of Four
  • 16cm In Length
  • For 20mm RIS Rails

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

£7.99
  • Pack of Four
  • 16cm In Length
  • For 20mm RIS Rails

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

£7.99
  • Stippled
  • Low Profile
  • Small Compartment

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

£7.99
  • Stippled
  • Low Profile
  • Small Compartment

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

£7.99
  • Fits on 20mm RIS / RAS Rails
  • Cheaper than a new sight
  • Clear & Yellow Option

This lens protector is a must-have product for any Airsoft Skirmisher who intends to play in a CQB environment, protecting your sights and scopes from being shot out by stray BB. Guess what's cheaper: A new sight or lens protector? 

Ships with peel-off protective film so it arrives perfectly clear when you attach it to your RIF

£7.99
  • Angled Grip
  • For 20mm Rails
  • Textured Surface

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

£7.99
  • Angled Grip
  • For 20mm Rails
  • Textured Surface

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

£7.99
  • For 20mm Rails
  • Textured Surface
  • Easy to Use Screw

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

£7.99
  • For 20mm Rails
  • Textured Surface
  • Easy to Use Screw

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

£7.99
  • Fits 25mm Optics
  • For 20mm RIS/RAS
  • High Profile Mounts

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

£7.99
  • For 30mm Optics
  • Set of Scope Rings
  • Low Profile Mounting

A set of Alloy constructed Scope Rings for 30mm Optics, that has a 20mm Mount on each ring for easy installation to a 20mm RIS/RAS/Picatinny Rail System. They are Low Profile Rings, which will hold your Optic low against your rail rather than reaching for the sky.

£7.99
  • Swept-back vertical foregrip
  • Full length or short available
  • For 20mm Picatinny rails

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

£7.99
  • Polymer construction
  • Non-functional battery box PEQ15
  • For 20mm Picatinny rails

If you have a front wired AEG with a tiny battery compartment, we have just what you need! The PEQ15 Battery Container from Specna Arms is a stylish looking polymer box, designed to hide your AEGs battery and allow you to use PEQ style block batteries in a front wired AEG which is short on space. This battery box is realistically sized, and sports all the fine details of a real PEQ15, but in non-functional "dummy" form. Unlike many PEQ battery boxes out there, this one also includes mock lens covers with mirrored inserts and realistic warning labels in all the correct places, making this "dummy" PEQ hard to distinguish from the functional versions! This battery box should fit any battery designed for a "Micro PEQ" or "PEQ15" style battery box.

£7.99
  • Aluminium alloy construction
  • Provides a 7mm diameter sling loop
  • Fits 20mm Picatinny rails

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

£8.99
  • Durable Rubber
  • Can Be Cut To Size
  • For 20mm RIS / RAS

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

£8.99
  • Swept-back vertical foregrip
  • Full length or short available
  • For 20mm Picatinny rails

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

£9.99
  • Tool-Less Fitting
  • Offset Scope Mount
  • 30mm Diameter Ring

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

£9.99
  • High Profile Mounts
  • Raise Low Profile Scopes
  • Perfect For Full-Face Masks

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

£9.99
  • Easy To Mount
  • Lightweight & Durable
  • Internal Hidden Storage

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

£9.99
  • Easy To Mount
  • Lightweight & Durable
  • Internal Hidden Storage

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

£9.99
  • Ergonomic Design
  • Promotes Natural Grip
  • Internal Storage Compartment

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

£9.99
  • 20mm RIS Compatible
  • Spring Powered Bipod
  • Press Button To Deploy

A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.

£9.99
  • Dummy PEQ Box
  • For Hiding Batteries
  • Ideal For Front Wired

This is a Dummy PEQ Box that is designed to look like a Laser/Light Module, but is actually an empty shell that can be used to hide a Battery for your Airsoft Gun.

£9.99
  • Ridged vertical foregrip
  • Adjusted via side screw
  • For Picatinny rail system

This Russian style vertical grip is for those of you that like to hold your rifle the easy way for better stability. The grip features ridged extrusions on the front and back for additional friction and grip, so your hands won't slip.

Constructed from high density polymer, this grip can be mounted to any 20mm Picatinny railed surface, but works best when mounted to a 6 o'clock rail, unless you have an unconventional style! Loosened and tightened by the side nub/bolt to secure in place.

£9.99
  • High density polymer construction
  • 20mm Picatinny rails at 3, 6, 9 and 12 o'clock
  • For AK-47/74 AEG and GBBR assault rifles

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

£9.99
  • Quick Detach grip
  • Stubby - Good for modern shooting stances
  • Mounts to 20mm Picatinny rails 

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

£10.99
  • Flip Up/Down
  • Replacable Shield
  • Fits Any 20mm Rail

Designed to be fit to Airsoft Rifles Rails in front of expensive Sights and Scopes to deflect incoming BBs to prevent the Sights becoming damaged. 



£10.99
  • Vertical Foregrip
  • Bottom Screw Tightens
  • Tightly Locks into Place

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

£10.99
  • Vertical Foregrip
  • Bottom Screw Tightens
  • Tightly Locks into Place

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

£10.99
  • For M-LOK Rails
  • Alloy Construction
  • Converts to 20mm

An Alloy constructed rail adaptor for M-LOK handguards, which converts M-LOK slots into 20mm RIS/RAS rails.

£11.99
  • Tool Free Fitting
  • 5'' / 12.5cm Long
  • Raises by 1'' / 2.5cm

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

£11.99
  • Folding Foregrip
  • Compact Design
  • For 20mm RIS / RAS

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

£11.99
  • For M14/M1A
  • 20mm RIS Rail
  • Secure Mounting

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

£12.99
  • Heavy Duty
  • Excellent Grip
  • Very Thick Grip

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

£12.99
  • Bottom Storage
  • Vertical Foregrip
  • Lightweight Design

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

£12.99
  • For EU Series
  • Very Strong Mount
  • 20mm RIS/RAS Rails

A 20mm Railed Mount for EU Series Airsoft Pistols, simply sliding onto the Flashlight/Laser Slot on the underside of the frame, and providing you with both a 20mm Rail for a Sight or Scope, as well as an underside 20mm Rail for a Torch, Laser or other single slot accessory. Unlike other Frame Mounts, this one is push fit with a spring-loaded release button for easy installation and removal.

£12.99
  • Picatinny side mount
  • Offset at 45 degrees
  • M-LOK attached

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

£12.99
  • Aluminium construction
  • Mounts to the rear sight of AKS-74U rifles
  • Provides 8cm of 20mm Picatinny rail

If you want a red dot sight on your AKS-74U but aren't a fan of the Russian side rail, 5KU has what you need! The 20mm Rear Sight Rail for AKS-74U AEG/GBBR is designed to mount over the rear iron sight of AKS-74U rifles, both the AEG and GBBR variety, providing a length of 20mm Picatinny rail measuring 8cm approximately. 

The part is constructed from aluminium to provide a great balance of strength and low weight and should fit most AKS-74U Airsoft guns on the market, though some may require slight modification. If you want to mount a red dot sight for faster target acquisition but still want to be able to fold your stock for tight quarters, the 5KU 20mm Rear Sight Rail for AKS-74U AEG/GBBR is the key!

£13.99
  • Textured Grip
  • Extends Down
  • Folding Foregrip

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

£13.99
  • Adjustable size
  • Engraved & Stickered
  • Mock PEQ Battery Box

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

£13.99
  • Adjustable size
  • Engraved & Stickered
  • Mock PEQ Battery Box

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

£14.99
  • Replaces rear sight
  • Provides 8 Picatinny rail slots
  • Built-in white dot emergency backup sights

The AK series of rifles are famous for many things, having the best Iron sights is not one of them. This rail replacement for your rear iron sight retains basic functionality with its built-in emergency backup sights whilst providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

£14.99
  • Angled thumbhole foregrip
  • Fits 20mm Picatinny rails
  • High density polymer construction

If you are after a grip that is not quite as angular as most angular foregrips, but it's not perfectly vertical, you have found it! The Tactical Angled Grip from NUPROL mounts to any 20mm Picatinny rail, and provides a comfortable angled pistol grip style foregrip which sits in your hand like it was designed to do it (and it was)! The grip is constructed from high density polymer and is secured to your rail with a steel bolt. The grip is ergonomically shaped to fit all hands, is incredibly comfortable to hold, and would fit perfectly with any modern rifle or primary pistol build!

About 20mm Picatinny RIS/RAS Rail Systems, Attachments & Accessories

20mm Picatinny accessories are an Airsoft staple, offering you the opportunity to equip your primary with all the mission essential equipment real operators do. Everything from red dot sights and scopes to RunCam action cameras and PEQ laser units can be found in 20mm Picatinny compatible form; with 20mm Picatinny, your only limitations are the rail space on your gun!

If your Airsoft gun doesn't have Picatinny rails by default, you will almost certainly be able to find a 20mm Picatinny handguard, scope rail or handguard rail here, allowing you to give your gun the elite look with an optical sight, tactical flashlight and a vast variety of options when it comes to grips and rail covers. 

Whether you need a free-floated 20mm Picatinny railed handguard for your M4, a Russian side rail to 20mm Picatinny adapter for your AK, rails for your G36 handguard or you just need a 20mm scope rail mount for your Sniper rifle, you will find it all here!