- Nano Coating
- GATE X-ASR MOSFET
- Quick Change Spring
An Airsoft Electric Gun from Specna Arms' Edge series of up-rated rifles, which offer much more out of the box than you would expect.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Edge series are a new line of replicas from Specna Arms which combine their usual hardy build-quality on the externals with uprated internals, and a Gate MOSFET as standard to squeeze every drop of performance out of these rifles. The RRA replicas feature full licensed trademarks of the firearms manufacturer Rock River Arms. The MOSFET is an X-ASR module from Gate which serves to protect your circuits and batteries, and allows basic troubleshooting on the board thanks to status indicator LEDs. The Edge series also feature an ESA™ quick change spring system which dramatically reduces the amount of time to change the output power of your rifle, by allowing you to change the main spring via the Buffer Tube. This is a great feature for those who want something that can do it all.
The externals are made from a mix of Aluminium and Zinc Alloy which undergo a rigorous course of Sand Blasting, Powder Coating and then Anodising to achieve a world-class finish on their metal-work. This finish is then protected by a 'Nano Coating' finish that reduces scratches. The external trim parts of the rifle such as structural screws and supports are made from Steel to ensure a long-life performance. The Polymers used throughout are an exceptional quality and feel really good in the hands, the Pistol Grip being textured to promote grip in all conditions. The pistol grip has a neat design which allows you quick access to the motor without the need for tools.
At the muzzle end of the replica, the flash hider can be screwed off to reveal a 14mm CCW thread underneath. This lets you attach Suppressors, Tracer Units, Muzzle Brakes or any compatible muzzle device to further enhance the looks or performance of your AEG. The top of the receiver features a 20mm rail which is ready to take any RIS compatible sights or scopes once the carry handle is removed. Adaptor rails are available to mount an optic on the carry handle as a throwback to the days of old. The six position sliding stock at the rear is where the battery is housed, and connects to a Deans connector, and you will also notice an Ambidextrous Sling Plate for left and right handed sling users.
The quality continues internally with a wealth of parts which would be considered an 'upgrade' on any other AEG. A rotary Hop Unit gives you fine and precise control over flight path, and being coupled with a precision 6.03mm barrel makes for a very pleasant firing experience. The 'ORION Gearbox' featured inside has a reinforced frame to handle high power springs and is designed around their quick change spring system. Other perks of the ORION Gearbox are: Reinforced Polymer Piston with Steel rack, Aluminium sealed Nozzle, Aluminium double sealed Cylinder Head, Aluminium double sealed Piston Head w/ bearings, Steel Gears and 8mm Bearings. All of this comes together to seal the perfect package for those who want the best of external and internal quality.
Included in the box are two Mid Cap 125rnd Magazines of P-Mag design, which has tiny Specna Arms logos used as a stippling pattern which looks absolutely fantastic! Also included is a Mini Tamiya to Deans adaptor, ID lanyard, an instruction manual and a certificate of testing from the manufacturer.
Features:
- Part of the Specna Arms Edge Series
- Branded by Rock River Arms, and built based on their designs
- Electric battery powered Airsoft AEG
- Safe, semi, and fully automatic fire modes
- Pre-upgraded with a MOSFET and updated Gearbox
- Pre-installed Specna Arms ORION Gearbox
- Pre-installed GATE X-ASR 4th Generation MOSFET
- Two 125rnd mid-cap spring fed 'S-MAG' magazines included in the box
- Uniqe serial number for each replica
- Rotary Hop-Up chamber for improved range and accuracy
- Easy to adjust Hop-Up unit thanks to the rotary adjustment wheel
- Upgrade 6.03mm Inner Barrel for improved accuracy over standard barrel
- QD Pistol Grip design
- Removable birdcage flash hider
- Removable carry handle
- 14mm CCW threaded outer barrel
- 20mm RIS / RAS railed receiver for sight and scope setups
- Classic A1 style Polymer handguard
- Integrated & adjustable ironsights
- Flat trigger guard
- Six position Adjustable Stock
- Battery stored in the weapons stock
- QD sling loop points on the stock
- Rubberised butt plate to prevent slippage
- ESA™ quick change spring system
- Rear ambidextrous sling plate for single point sling setups
- Sand Blasted, Powder Coated, Anodised and Nano Coated
- Rear wired V2 Orion upgraded gearbox
- Reinforced piston with full steel teeth
- Aluminium seal nozzle
- Aluminium double seal cylinder head
- Aluminium double seal piston head
- Spring guide with bearing
- Steel gears for performance and reliability
- 8mm ball bearing
- Quick change spring system
- Mock charging handle which reveals the hop-up unit
- Mock forward assist
- Branded:
- 'Rock River Arms'
- 'COLONA, IL'
- 'CAL. 5.56MM'
- 'LAR-15'
- 'P1TR0LB5E'
- 'AIRSOFT REPLICA'
- 'LICENSED TRADEMARKS'
- 'OF ROCK RIVER ARMS'
- 'SPECNA ARMS INDUSTRIES'
Package Includes:
- Rock River Arms SA-E01 Edge Carbine
- 2 x 125rnd Mid Cap Magazines
- Instruction Manual
- Testing Certificate
- ID Lanyard
Special Instructions:
The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.
Specification
General
 |
Assault Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 310fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Regular Player
|
Weight and Dimension
 |
Approx. 2.6kg
|
|---|---|
 |
80cm
|
 |
88cm
|
Construction
 |
Black,
 |
|---|---|
|
|
Black
|
 |
No
|
 |
Aluminium & Zinc Alloy, Steel & Polymer
|
|
|
Polymer
Alloy
Steel
|
 |
Polymer
Alloy
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
M4 / AR15 / M16
|
 |
STANAG
|
 |
   |
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Behind mock bolt plate when charging handle to the rear
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS
|
 |
Sliding
|
|
|
6 Position
|
 |
Iron Sights
|
 |
Buffer Plate , Stock , Handguard ,
|
Barrel
 |
Male
|
|---|---|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
6.03mm
|
Magazine Specific
 |
Medium Capacity , AEG,
|
|---|---|
 |
Approx. 125 Rounds
|
 |
Speed Loader
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V2 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
Battery Specific
 |
  |
|---|
Suggested Battery
 |
Li-Po
|
|---|---|
 |
Crane
|
 |
7.4v
|
Product Testing Data
 |
310FPS
|
|---|---|
|
|
ASG Blaster 0.20g BBs
|
|
|
07/03/19
|
Need ideas for something extra?
- 30/125 Rnds Selectable
- Lightweight & Tough
- Modern Design
A lightweight Polymer mid-capacity Airsoft magazine for M4/M16 variant rifles, with the neat trick that you can switch between a maximum capacity of 30 or 125 BBs.
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 3 MOA Target Dot
- 1 MOA Adjustment
- Waterproof & Rugged
A T-1 style optic which is protected by tough Rubber Armour, has eleven levels of brightness on its' 3 MOA Target Dot and comes included with both a high and low profile 20mm mount. Enjoy real-steel quality at Airsoft prices.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- Lightweight & Tough
- 350 Round Capacity
- Ridged & Textured
A lightweight Polymer high capacity wheel wound magazine for Airsoft M4/M16 variants that will be accepted by 99% of M4 based Airsoft weapons.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Foam Filled
- Spring Core
- 14mm CCW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
- Hex Pattern
- 140rnd Mid Cap
- Orange Follower
This is a Polymer constructed Magazine for Airsoft M4/M16 Platform Airsoft Guns, that holds a total of 140rnds and has an awesome hex pattern which looks great in any stock or custom gun. The Magazine also features '5.56x45mm NATO' markings for another layer of realism.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- For 14mm CCW
- Steel Construction
- Acetech Tracer Unit
A highly realistic Suppressor for Airsoft Guns with a 14mm CCW Thread, that has an Acetech Tracer Unit hidden inside to illuminate Tracer BBs on their way to the target. This helps you aim your shots, and confirm what you have hit more easily in the dark. Featuring an internal Rechargeable Battery, this Tracer/Suppressor is charged using an included Micro USB Cable, just as you would your Mobile Phone.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Slide Forward to Open
- Available in Multiple Sizes
- 40mm MOSCART Launcher
Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.
- Mechanical Recoil
- 14mm CCW Thread
- KeyMod Handguard
A seriously tough and good-looking AR/M4 platform replica which is powered by electric, features a KeyMod rail system complete with handstop and rail adaptor, and comes packaged with the Bolt Recoil Shock System for a hard-kicking mechanical recoil.
- Metal Receiver
- Folding Solid Stock
- Polymer Hand Guard
A modernised AK-74 6mm Airsoft AEG Replica, with a ergonomic polymer Hand Guard, Moulded Grip and folding Solid Stock. The Rifle is constructed with an Alloy body, with Polymer Hand Guard, Grip and Stock.
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Accurate Replica
- All Alloy Construction
- Period Authentic Replica
A realistic gas blowback Airsoft replica B9 handgun constructed from alloy and with accurate controls, it is perfect for skirmishing.
- Low Light Ironsights
- Threaded Outer Barrel
- Integrated Red Dot Sight
From one of the hottest new brands on the scene, VORSK, comes a 4.3 Hi-Capa which offers a realistic Gas Blowback action as well as an Integrated Red Dot Sight, Threaded Outer Barrel, Low Light Ironsights and much more. This is the perfect sidearm for those who love the Hi-Capa platform but want a more compact backup.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.