- 6.03mm Tightbore inner barrel
- High density polymer construction
- Spenca's featherweight AR-9 offering
If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.
The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.
Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Specna Arms FLEX™ line was designed with the objective of outdoing Specna's renowned CORE™ line in the lightweight, low-cost AEG game. Specna has maintained the robust, reliable and simple internals that made the CORE™ series such impressive and dependable platforms and has replaced some of the alloy components present in the CORE™ line with fibre-reinforced polymer parts, even further reducing the overall weight of the rifle and increasing its resistance to scratches.
The SA-FX01 is Specna's first AR-9 style FLEX™ AEG, borrowing the unique aesthetic from its high end brethren, the SA-X01 EDGE 2.0™ and combining it with the rock-solid FLEX™ internals and high density polymer construction to keep things lightweight and agile, not to mention cost effective. As with previous FLEX™ releases, the SA-XF01 is kitted out with a 6.03mm tightbore inner barrel straight out of the box, giving you a free upgrade to keep this lightweight and agile platform competitive with rival platforms.
Starting at the tip of the 8.5-inch outer barrel we can find an M4/AR-15 birdcage flash hider mounted to 14mm CCW male threading. The outer barrel is constructed from alloy to provide a strong backbone and keep the tightbore inner barrel nice and straight for perfect accuracy. If you want to mount a tracer unit, suppressor or alternative muzzle device all you need to do is unscrew the flash hider and mount your preferred device thanks to the common 14mm CCW threading at the tip of the barrel.
The handguard is equipped with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions, ready for any M-LOK accessories to be directly mounted. M-LOK is one of the latest accessory interfaces to hit the market, both for real steel and Airsoft, allowing you to fit M-LOK vertical or angled grips directly, or mount 20mm Picatinny rail adapters for M-LOK to make use of 20mm Picatinny grips, flashlights and laser units.
Also present on each side of the handguard is a pair of QD sling sockets; one at the front and a second at the rear. This allows you to fit QD sling swivels, meaning you can quickly remove your sling and reconfigure it without needing to untangle yourself! The QD sockets are available on either side, meaning both left and right-handed shooters can mount a sling setup to suit them with ease.
With a 20mm Picatinny rail at the 12 o'clock position, the handguard also provides a mounting point for the included flip-up aperture iron sights which can either be left flipped down or removed entirely if you prefer to use a red dot sight or scope. The irons can be raised and lowered by hand, with no need to press buttons or fiddle with catches, and are fully adjustable for both windage and elevation.
The handguard's upper Picatinny rail meets the 20mm rail on the receiver seamlessly, allowing large optical sights and red dot sight + magnifier combos the extra space they need to be mounted easily. The receiver itself is constructed from fibre-reinforced high density polymer with a beautiful matt finish and a high quality textured feel, keeping the weight low and the strength high, with added scratch resistance so the odd mid-skirmish bump or scrape doesn't mean your pride and joy looks scruffy.
When it comes to the controls, the SA-FX01 is patterned after the M4/AR-15 platform, offering comfortable and well placed controls which are easy to master for almost any user. The fire selector switch can be found on the left side of the receiver, just above the pistol grip, offering 3 modes of fire; SAFE, SEMI-AUTOMATIC and FULL AUTO, with a 90-degree throw between each mode. The selector is a modernised design with an updated aesthetic to match the visual language of the SA-FX01 and is also far easier to use than the original M4/AR-15 selector design thanks to its raised profile and textured surface.
The magazine release is located centrally, just behind the magazine well, making it easy to operate for both left and right-handed shooters. This magazine release is definitely not one you will struggle to find in the heat of the moment; its prominent design and serrated contact surface mean fast reloads are a breeze, even with the adrenaline pumping!
Magazine compatibility-wise, we are happy to report that the SA-FX01 accepts Specna Arms S-MAG Mid-caps for the SA-X series, PTS Syndicate EPM-AR9 magazines and G&G ARP9 magazines, even the seriously intimidating G&G 1500rnd Drum Magazine. We think perhaps a drum mag might compromise the agility of the SA-FX01 slightly, but who can argue with 1500 BBs on tap? The SA-FX01 comes with a 200 BB high-capacity magazine included, so while extra mags are available, you get a bit of a head start on capacity straight out of the box.
The trigger is the standard "mil spec" design, with a curved face to keep your finger positioned properly and prevent bad habits from developing. The trigger guard is enlarged and built into the receiver, offering strength improvements when compared to the standard M4/AR-15 modular trigger guard and allowing easy access to the trigger for users wearing full-finger gloves. Gloves are very much necessary for Airsoft, especially CQB where a finger or knuckle shot can be absolutely eye-watering. Thankfully, the SA-FX01 accounts for this and will not punish you for being well prepared for the battlefield!
The charging handle can be found at the top rear of the receiver and features an extended latch which protrudes on the left side for fast access and one-handed operation. When the charging handle is pulled, the mock bolt carrier will retract and lock at the rearmost position, revealing the rotary HOP-up unit within the mock ejection port. The rotary HOP-up unit is the latest design for the M4/AR-15 platform and improves on the older "gear" unit with finer increments of adjustment and improved ability to hold its setting under the vibrations of full auto fire.
The HOP-up allows the user to adjust the amount of backspin applied to the BB and tune it to provide optimum range and a stable flight path with various weights of BBs. For the SA-FX01, we recommend 0.25g for the best combination of projectile speed, wind resistance, and range. When you have adjusted your HOP-up you can press what is known as the "bolt catch", the ping-pong paddle shaped control on the right side of the receiver. This will release the mock bolt carrier and send it forward with a satisfying clank, keeping dust and debris out of this sensitive internal part, even if you like the odd mud bath at your local woodland site!
The pistol grip is located at the bottom of the receiver and is a very modern, ergonomic design based on the real steel "Gunfighter" style grip. The grip has crackle texture on each side and linear serrations at the front, providing perfect grip in any weather condition, even if you take your chances without gloves. The angle of the "gunfighter" style grip is slightly more vertical than the typical "A2" M4/AR-15 grip which improves comfort and eliminates wrist fatigue when shooting in modern shooting stances with the stock fully collapsed. The grip also has a filled-out backstrap, effectively supporting the web of the hand to keep your shooting position consistent for repeatability and accuracy.
At the rear of the receiver, we come to the M4/AR-15 buffer tube which is constructed from high density polymer and offers 6 positions of adjustment so you can adjust the stock to suit your body type and loadout perfectly. The buffer tube also serves as the battery compartment, and to access the battery compartment you will need to pull the adjustment pin of the stock out slightly (located on the bottom of the stock). With the pin held in this position, you can slide the stock off the buffer tube to the rear, revealing a mini-Tamiya battery connector inside. We recommend a 7.4V 1200mAh LiPo in stick configuration for the SA-FX01 for an easy fit and perfect performance.
Bringing up the rear of the SA-FX01 we have the Specna Arms Light Ops stock which is part of Specna's new SAAS (Specna Arms Accessory System) line. This stock is based on existing low profile M4/AR15 stocks but with some choice refinements for improved comfort. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.
The butt plate is constructed entirely from rubber with deep linear serrations and an angled profile to more effectively grip your shoulder if you use Airsoft body armour or a bulky tactical vest. Either side of the stock boasts QD sling sockets, meaning if you add a QD sling swivel you can add and remove your sling in a matter of a second or less. The low profile adjustment lever of this stock is well out of the way and immune from snags, and has texture on its surface to allow for ease of use in wet conditions. This stock not only looks unique but functions fantastically, and the solid high density polymer it is constructed from feels like it could be used to beat whales to death.
Whether you are just starting your Airsoft adventure or you are a seasoned skirmisher looking to expand your arsenal with a platform with a high speed leaning, the SA-FX01 would be a great platform for you. With rock-solid high density polymer construction, a unique look, pre-upgraded parts and considerately designed ergonomic furniture, you will never move faster in game than with the SA-FX01 by your side!
Features
- 6.03mm Tightbore inner barrel - Great accuracy and range potential
- High density polymer construction - Alloy outer barrel and flash hider, alloy and steel trim parts
- 14mm CCW Male threaded outer barrel - Ready for a tracer unit or suppressor
- M-LOK handguard - M-LOK slots at 3, 6, and 9 o'clock, 20mm up top, ready for M-LOK or 20mm accessories
- 4 QD sling sockets on the handguard, 2 on the stock - Ready for QD sling swivels to be mounted
- Flip-up aperture iron sights pre-installed - Adjustable for windage and elevation, 2 apertures to choose from
- 20mm Picatinny railed receiver - Ready for red dot sights, PEQ lasers or scopes to be mounted
- Rotary adjustable HOP-up unit - The latest M4/AR-15 design, holds its setting well and allows for fine adjustment
- Ergonomic pistol grip - Textured with a filled-out back strap, a more vertical design for modern shooting stances
- Enlarged trigger guard - Built into the receiver, very strong and plenty of room for gloved use
- 3-Position fire selector switch - SAFE, SEMI AUTO & FULL AUTO, 90-degree throw between each mode
- Extended charging handle - Fast access to the HOP-up unit for quick mid-game adjustment
- Functional mock bolt catch - Send the mock bolt home after HOP-up adjustment by hitting the bolt catch
- 6-Position M4/AR-15 buffer tube - Adjust the stock quicky and easily to suit your body type or loadout
- Specna Arms Light Ops stock pre-installed - Comfortable and modern stock design with QD sling sockets built-in
- Version 2 Gearbox - Alloy shell, steel gearset, 8mm bushings and ESA quick change spring system
- Rear wired - Mini-Tamiya battery connector inside the buffer tube, accessible with the stock removed
- Recommended battery: 7.4V 1200mAh LiPo battery in stick configuration
- Compatible magazines: Specna Arms S-MAG For X-Series | PTS Syndicate EPM-AR9 | G&G ARP9 Magazine
- Drum Magazine available here: G&G Armament 1500rnd Drum Magazine
Package Includes
- Spenca Arms SA-FX01 FLEX AR-9 SMG AEG
- 200rnd High-capacity magazine
- User manual (QR code for online manual)
- Cleaning rod
- Specna Arms stickers
Specification
General
 |
Submachine Gun
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 290fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Starter
|
Weight and Dimension
 |
Approx. 1.821kg
|
|---|---|
 |
67cm
|
 |
75.5cm
|
Construction
 |
Black,
 |
|---|---|
 |
Alloy outer barrel, receiver end plate & trim parts. Steel mock bolt carrier & QD sling sockets. High density polymer handguard, receiver, buffer tube, stock & pistol grip. Rubber butt plate.
|
|
|
Polymer
Alloy
Rubber
Steel
|
 |
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
AR Platform, Long Gun, Submachine Gun, AR-9,
|
 |
Long Gun Magazine, Submachine Gun, PTS EPM-AR9, Specna Arms S-MAG for SA-X series,
|
 |
   |
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Behind mock bolt carrier, accessible when the charging handle is pulled and the mock bolt is locked to the rear.
|
Furniture
 |
|
|---|---|
 |
20mm Railed Receiver, M-LOK Rail system,
|
 |
Sliding , Multi-Position ,
|
|
|
6 Position
|
 |
Iron Sights , Aperture Iron Sight,
|
 |
Stock , Handguard , QD , Loop ,
|
Barrel
|
Outer Barrel Length (in)
|
8.5''
|
|---|---|
 |
Male
|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
6.03mm
|
 |
230mm
|
Magazine Specific
 |
High Capacity, AEG,
|
|---|---|
 |
Approx. 200 Rounds
|
 |
Fill Window
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V2 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
 |
No
|
 |
No
|
Motor
 |
Standard
|
|---|
Battery Specific
 |
 |
|---|
Compatible Battery
 |
Li-Po
|
|---|---|
 |
Stick
|
 |
7.4v
|
Product Testing Data
 |
290 FPS +/-10%
|
|---|---|
|
|
0.2g ASG BLASTER
|
|
|
29/09/2023
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Tolerance: 5.95mm +/- 0.01mm
- Biodegradable BBs
- 0.25g Weight - 2200 or 6000rnd options
If you are looking for biodegradable BBs for use in both CQB skirmishes and out in the glorious woods, NUPROL have just the thing! The RZR 0.25g Precision BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are constructed from a biodegradable polymer, meaning they will be allowed on even the strictest Airsoft sites and no need to worry about cleaning up after shooting!
- 12g Capacity
- Single CO2 Bulb
- Steel Construction
A 12g CO2 Bulb Capsule Single, sold individually these 12g bulbs can be used for both Airsoft and Air rifles.
- Special Putty
- Oils & Degreasers
- Cleaning Tools Included
A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport.
- 4x Fixed Zoom
- 4x32 Rifle Scope
- Scope Rings Included
A Scope designed for Airsoft Weapons designed to allow the user to place accurate shots at range, and allows you to follow the trajectory of BBs as they are fired.
- White In Colour
- Heavyweight BBs
- Improve Range & Accuracy
The BBs that Airsoft snipers have been waiting for: the ultimate heavyweight, precicsion made 0.43g Airsoft BBs, designed to offer users enhanced range and accuracy.
- High Power Gas
- Metal Fill Nozzle
- Contains UPL+ Lubricant
Abbey Predator Ultra GAS is the perfect propellant for any gas weapon from pistols to high tech sniper rifles. It contains UPL+ lubricant which is designed to stay permanently mixed with the propellant.
- Check and dot pattern texture
- 150rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for an ultra-modern styled mid cap, this is the one you're after!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Weaker Than Ultra Gas
- Ideal Summer Gas
- 700ml Content
A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity.
Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.
- 1kg bulk bag
- Choice of BB Weights
- High quality - Great value!
For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!
- 14mm CCW or 14mm CW threads
- "Brrrrt" markings - 40mm Diameter version
- Foam filled for slight sound dampening
If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.
This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 30ml Content
- Great Lubricant
- Easy Drip Nozzle
Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.
- 1kg Bag of BBs
- Approx. 3550 BBs
- Standard White 0.28g
Developed by Evolution Airsoft these 1Kg Bag of 0.28G BBs are great standard BBs for regular Skirmishers and Airsoft players who are looking to get great performance from their Airsoft gun. 0.28g BB are commonly used as a Regular to Advanced Player weight of BB, and are great for outdoor gameplay, allowing them to punch through bushes, grass, and more stable in wind. These BBs are perfect for use in Airsoft guns operating over 320fps, or for upgraded guns with an effective hop-up unit.
The BBs come in a 1kg Bag, with the bag containing approx. 3550 BBs, and is resealable to ensure that your BBs stay as fresh as possible, and prevents them from spilling once the bag has been opened.
- White in Colour
- 1000 BBs Per Pot
- Improve Accuracy & Range
The BBs everyone has been waiting for! A White Airsoft Sniper 6mm BB pellet that also works!
- Green Gas
- 520ml Contents
- 90% Propane / 10% Butane
Green Gas designed for use on gas powered Airsoft pistols, Rifles and Shotguns. The gas comes in a lightweight aluminium can and has a heavy duty metal nozzle meaning it won't snap.
- Low Powered Gas
- Silicone Lubricants
- For Polymer Pistols
A bottle of Low Powered Gas designed by NUPROL as part of their Green Gas Range, designed to be used with Plastic Bodied Weapons and Small Submachine Guns which require lower powers to operate.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!
- Integrated optical sight
- Front 20mm RIS rail
- Bullpup configuration
Bullpup rifles, you either love 'em or you hate 'em. But assuming you've found your way to this page, we're guessing you're on team rear mag. This variant features a shorter barrel so the compact nature of the AUG is augmented further, giving you a long hidden inner barrel with a vastly reduced footprint when held against your person.
With an integrated scope and front para 20mm rail with pistol grip included, this variety of AUG is great for both CQB and longer range outdoor skirmishing alike, giving you the best of both worlds. With a sturdy and compact design, bullpup fans, you may have just found your new favourite primary.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Tactical Appearance
- Alloy M-LOK Handguard
- Hi-tech Internal Enhancements
The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- Thread adaptor and rail
- Extended base plate
- Light enhancing sights
Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.
The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.
- Square Ironsights
- CO2 Compatible
- Textured Grip
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.
This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!
- Revolver Grenade Launcher
- Can fire 6x MOSCARTs in rapid succession
- The ultimate Airsoft firepower!
If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.
The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!
The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.
Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!
- Full metal construction
- 6.01mm Steel tightbore inner barrel
- An AK dressed for 21st century combat
If you are a fan of the AK platform but want something that can be equipped like a modern AR, the ARCTURUS AK74 TWS M-LOK Carbine should satisfy your needs! This AK is built like a tank, much like ARCTURUS's other AK offerings, but is equipped with a 20mm railed receiver cover and M-LOK/Picatinny hybrid handguard to allow a wide range of modern western accessories to be mounted seamlessly, with no need for adapters or improvised solutions.
On the inside, we are equally well equipped with the AK74 TWS. This AEG has a 6.01mm steel tightbore inner barrel, a modern rotary style AK HOP-up unit and some well chosen internal upgrades focussing on reducing friction and improving the efficiency of the system, and the result is impressive performance with little to go wrong. Those after an AK that can do everything an AR can, this one is for you!
- Full metal construction
- 20mm Picatinny frame rail
- Phrobis Navy "Dolphin" style slide
If you have a thing for the B9 design, you are not alone. The issue is, the B9 platform is becoming more and more popular, and it is hard to find a real head turner with B9 styling. Well...until now! Introducing the Vorsk VM9 OSIRIS, a B9 variant you probably haven't seen before! Based on a pistol designed for the US Navy SEALs, the OSIRIS is a B9 with a new strengthened slide design with its own unique style and a hidden full-auto fire mode!