MLOK Rail & Attachments

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 4'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

Looking for something to kit out your M-LOK or Keymod handguard? The MGPCQB PPG-S Hand Stop is an excellent unique option! This high-density polymer attachment is a comfortable place to rest your hand and prevent it from sliding forward in front of the barrel.

It has a slightly angled design so your hand sits in the optimal position for quickly switching between targets. It mounts to M-LOK and Keymod thanks to its T-link mounting system. If you need a multi-use handstop that can be used between attachment interfaces, the MGPCQB PPG-S Hand Stop is the best choice for you!

Looking for something to kit out your M-LOK or Keymod handguard? The MGPCQB PPG-S Hand Stop is an excellent unique option! This high-density polymer attachment is a comfortable place to rest your hand and prevent it from sliding forward in front of the barrel.

It has a slightly angled design so your hand sits in the optimal position for quickly switching between targets. It mounts to M-LOK and Keymod thanks to its T-link mounting system. If you need a multi-use handstop that can be used between attachment interfaces, the MGPCQB PPG-S Hand Stop is the best choice for you!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

The CYMA Low-profile Polymer M-LOK handstop is a simple but effective upgrade for players who want better front-end control without adding bulk. Designed to mount directly onto M-LOK rail systems, it provides a firm index point for your support hand, helping maintain consistent grip placement during fast transitions and rapid fire.

Constructed from high-quality polymer, it keeps weight to a minimum while remaining durable enough for regular skirmish use. The low-profile design prevents snagging on gear or obstacles, making it ideal for CQB builds, lightweight rifles and players who prefer a streamlined setup.

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

For those who like a traditional horizontal grip but require a bit more to hang on to, MGP have the perfect accessory for you! Introducing the PPG Hand Stop, a uniquely designed accessory providing the functionality of a hand stop but with a slight angle, also offering the benefits of an AFG. The part is constructed from high density polymer and can be mounted to either M-LOK or KeyMod rail systems using the included steel attachment screws. 

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

If you're searching for a tactical vertical foregrip with slick styling and flawless handling, the PTS Syndicate EPF-M Modular Foregrip is perfect! Ot comes with grippy texturing and a low-profile design for reduced snagging, giving you ample traction without the risk of it getting caught on the terrain.

The EPF-M mounts to M-LOK rails via its aluminium mounting apparatus. The inside is hollow, which reduces the overall weight of the foregrip, keeping your front end easy to move between targets. If you want more control over your primary when sweeping rapidly between targets, the PTS Syndicate EPF-M Modular Foregrip is perfect for the task!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

Flash light cables dangling and snagging your sling? WADSN has got you and your cables covered! This is a rail cover for M-LOK rail system with a textured exterior for that bit of extra friction and grip. But the real use of this rail cover is that it has a number of recesses for which to run cables through, keeping them confined and tidy.

So if you find yourself with loose cables from tactical devices such as battery wiring, pressure switches and other cables, this is what you need to keep them out of the way and minimize snagging.

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between.