Airsoft Gas / CO2 Magazines

If you need mags for your WE EU17/18 or Armorer Works VX7 Standard Slide, these will be useful! The Armorer Works 27rnd Green Gas Magazine for EU17/VX7 GBB is made with an alloy shell, polymer feed lips, a rubber gas route bucking and brass valves. 

Loading BBs is carried out through the feed lips on the top, or through the widened section of the follower channel on the front, by dragging the follower down. You can load with a speed loader, or by hand, depending on your deadline. The fill valve is on the bottom, and you'll need to invert the magazine to fill it with green gas.

This magazine is designed for both the WE EU17/18 and the AW VX7, but it will only work on standard slide models, not the optics-ready version.

If you need mags for your WE EU19 or Armorer Works VX9 Standard Slide, load up on these! The Armorer Works 23rnd Green Gas Magazine for VX9/EU19 GBB is made with an alloy shell, polymer feed lips, a rubber gas route bucking and brass valves. 

Loading BBs is carried out through the feed lips on the top, or through the widened section of the follower channel on the front, by dragging the follower down. You can load with a speed loader, or by hand, depending on your deadline. The fill valve is on the bottom, and you'll need to invert the magazine to fill it with green gas.

This magazine is designed for both the WE EU19 and the AW VX9, but it will only work on standard slide models, not the optics-ready version. It also won't fit EU17/VX7 or EU18/VX8 models, due to its shorter length.

If you need mags for your WE Apache GBB SMG, fill your rig with this for max capacity and easy loading! The WE 45rnd Green Gas Magazine for Apache GBBR; V2 is an open-front design, giving you access to the follower so you can load with ease through the widened front channel, just like a GBB pistol magazine. 

The fill valve is on the bottom, and as with all GBB mags, the magazine must be inverted to fill with green gas. Like the original mag supplied with the Apache, this magazine features a dry-fire mode, meaning you can deactivate the stop firing on empty feature for training, filming, or just playing around. To activate dry-fire mode, hold the switch on the rear down and flick the switch on the top forward.

Whether you're working on a GBBR DMR or you're running a historically accurate Vietnam primary, the CYMA 20rnd Green Gas VN Magazine for MWS/CGS GBBRs belongs in your rig! Made with a steel shell and polymer internals, this mag is far shorter than the standard AR mag, meaning you can keep your primary compact and get lower in the prone position.

Designed for CYMA's CGS GBBRs but also compatible with TM ZET System M4/AR-15 GBBRs, this short mag replicates the early issue 20-round M16 magazine first used in the Vietnam War but also found paired with MK12 SPR rifles in more recent history.

The fill valve is on the rear of the magazine body and must be facing upwards to fill with gas. Loading is carried out through the feed lips on the top. We recommend a speed loader with a GBB adapter to load this mag, as the spring is quite stiff.

A spare or replacement 20-round Airsoft magazine designed for use in both the RAVEN EU Series and WE Europe's G-Series of gas blowback Airsoft pistols.

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

Looking for spare magazines for the VORSK VMP-1 or VMP-2? You have found them! The VORSK 45rnd Magazine for VMP GBB Series is constructed from alloy with a steel feed spring and brass valves, holding 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. The fill valve is on the baseplate and as with all GBB mags, you'll need to invert the mag to fill it with gas.

Please note, these magazines do not include the polymer magazine sleeve, but you can grab them here: Sleeve for VMP-1 | Sleeve for VMP-2

Ideal for VMP-1 or VMP-2 users who need maximum capacity, this magazine is also compatible with ASG MP9 and KWA TP9 replicas. If you're gearing up to run the VMP-1 or any VMP-2 variant, these magazines are essential!

This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.

If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.

A spare or replacement Magazine for Army Armament branded 1911 series Gas Blowback pistols, holding a total of 25rnds and being compatible with R31 and R29 models. It has a flat baseplate so that it fits flush with the bottom of the Pistol Grip, and is reportedly compatible with Army, APS, KJ Works and Tokyo Marui models.

A replacement/spare gas magazine for the ASG / TM MK23 NBB pistols, which is manufactured to an OEM standard.

A replacement, spare or 'special treat' magazine for your gas-powered EU Series pistol, which holds a frightening 50rnds to keep your sidearm blazing throughout the day.

If you need spare mags for your WE EU/G-series GBB pistol, this will do it! The 25rnd Green Gas Magazine for EU17/18/19/34 GBB Pistols from WE is constructed from alloy with a steel feed spring, polymer feed lips and a polymer baseplate made in Gen.3/4 style. This mag should work in most EU-series and G-series GBB pistols which use a flat gas route bucking, but is ideally for WE-branded EU-series pistols. 

The magazine is loaded through the feed lips at the top or through the follower on the front, by pulling the follower down to the widened section. You can either load by hand or use a speedloader, depending on how quickly you need to get back online. To fill the magazine with green gas, there is a fill valve located on the bottom, recessed into the magazine baseplate. Invert the magazine and your gas can, hold the two together for 5-10 seconds, and you're filled up and ready to go!

Please note: If you're using this mag with an EU19 or EU23, it will protrude from the bottom of the grip when inserted.

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

If you are running the gorgeous Army Armament Sand Viper you will need some equally gorgeous magazines to feed it! The Army Armament 28rnd Magazine for TTI Sand Viper is intended for the Sand Viper, of course, and comes with a CNC machined Aluminium baseplate finished in bronze sporting the Taran Tactical Innovations logo. Being a Hi-capa-based design, this magazine should also fit and feed in most TM-compatible Hi-capa pistols.

The magazine follows the standard GBB pistol mag layout, with the gas fill valve located on the baseplate, requiring both the magazine and your gas can to be inverted to fill. The mag can be loaded through the feed lips or through the feed channel on the front when the follower is pulled down, either by hand or using an Airsoft speed loader. If you want to load up on mags for your Sand Viper but you need the matching baseplates, here you go!

A CO2 powered 21rnd magazine for the KWC/Cyber Gun CO2 powered Desert Eagle.

A Gas Blowback Magazine designed for the WE Europe EU-Series Pistol Range, designed to allow the user to carry more rounds than standard Airsoft Pistols, giving the user a tactical edge in the field.

Want to run your trusted side arm as a primary? Now is your chance! A 30 round magazine for the 1911 platform designed for the Army Armament 1911 / R32.

A spare Magazine for the Tokyo Marui Airsoft Hi-Capa 5.1 6mm BB Pistol Range. The Magazine is constructed with an Alloy Body, and a Polymer Feed Lip, Magazine Follower and Base and features a black finish. 

A 40 Round Green Gas Magazine for the UMAREX Airsoft Gas Blowback MP7A1.

If you're running your VMP-1 SMG as a backup or cutting about with the beastly VMP-2D or MD, the VORSK 20rnd Short Gas Magazine for VMP GBB Series is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol or need compact mags to suit your VMP-2D or VMP-2MD DMR, these are what you need!

If you want some awesome, realistic-looking 5.56 mags and you're running a CYMA CGS or TM MWS system GBBR, you should check these out! The EMG 30rnd 5.56 Style Magazine for CGS & MWS GBBRs is compatible with both the CYMA CGS and Tokyo Marui MWS M4 systems. It is a green gas magazine, and the fill valve is on the bottom of the polymer Lancer Systems L5 AWM Magazine-style body.

This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these magazines include the bolt stop components, which lock the bolt open at the end of a magazine, and each magazine holds 30 BBs.

If you want some awesome, realistic-looking 5.56 mags and you're running a CYMA CGS or TM MWS system GBBR, you should check these out! The EMG 30rnd 5.56 Style Magazine for CGS & MWS GBBRs is compatible with both the CYMA CGS and Tokyo Marui MWS M4 systems. It is a green gas magazine, and the fill valve is on the bottom of the polymer Lancer Systems L5 AWM Magazine-style body.

This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these magazines include the bolt stop components, which lock the bolt open at the end of a magazine, and each magazine holds 30 BBs.

A spare Gas magazine for the Army Armament R501 Gas Blowback Airsoft Pistol, which holds a total of 30 BBs and is the perfect way to spend more time in the field playing, and less time in the safe zone reloading. The magazine features a custom Polymer Baseplate which is easily slid to the side to access the inlet valve. 

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.