Airsoft Grips & Stocks

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 3cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.

Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

If you're finding your current battery running out too quickly and have nowhere to store a larger battery this battery extension from Hades Airsoft has got you covered!

A PDW stock extension built from high density polymer, design specifically for the Double Eagle replica. Models include the M904G, M904C, M904L and M904R.

Keep yourself in the fight and shoot for longer durations with battery storage up to 16 cm within the stock.

A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Skeleton Stock w/Folding Butt Plate is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium with weight reducing cuts throughout, and the folding/mounting mechanism is constructed from steel to provide the prerequisite strength. This stock is ideal for super compact setups with its folding butt plate, and its raised cheekpiece provides superb sight alignment. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing an ultra-compact solution when folded, with full functionality when deployed! Get this on your MPX, it deserves it!

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

If you have a Double Eagle M90x with the Honey Badger PDW stock and you fancy a change, until now you have been SOL! Introducing the Buffer Tube for Double Eagle M4/AR-15, a replacement original part from the M904 AEG. This set includes an alloy buffer tube and castle nut, a steel bolt and spacer and a polymer receiver stock adapter which can be used to convert an M90x series with the Honey Badger stock to a standard AR buffer tube.

Whether you have damaged the stock mounting apparatus on your Double Eagle M90x polymer receiver or you are bored of the Honey Badger look and you want to change things up, this set is the perfect thing!