Search results for 'M-Lok'

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

A set of four Hard-Rubber blanking plates for M-LOK Rail Systems, which will effortlessly push into place and provide a much more comfortable and grippy surface to handle your replica. The panels have a soft-textured surface and are easily installed by pushing them into M-LOK Rail Slots.

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you like minimalist accessories with loads of functionality, this grip should suit you! The M-ETAL Angled Foregrip; M-LOK & KeyMod is a hybrid design, functional as both a low-profile angled foregrip or a hand stop and mounts to both KeyMod and M-LOK negative space attachment interfaces. This lightweight, skeletonised grip is constructed from aluminium with steel mounting hardware and weighs in at a microscopic 30g, meaning you can enhance handling without adding excess weight. 

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

A rail panel designed to convert your M-LOK attachment space into a more common 20mm RIS/RAS rail.

A rail panel designed to convert your M-LOK attachment space into a more common 20mm RIS/RAS rail.

If you want to give your M-LOK or KeyMod rail a new look or keep your attachment slots protected, rail covers are what you need! The MGP PPG Rail Cover Panel for M-LOK and KeyMod are supplied as a set of 3 covers; one 40mm, one 80mm and one 120mm cover and are designed to attach to both KeyMod and M-LOK slots. Each cover has hex pattern texture on the surface, inspired by Kryptec Typhon camouflage. The texture both looks fantastic and provides excellent gripping qualities, improving the wet weather handling of your primary and making it look more unique.

The covers are constructed from Nylon reinforced polymer and as such are rock solid, with not a hint of flex to be found. The supplied T-nuts are constructed from steel to provide ample strength to keep the covers tightly fitted, even when heavily used. If you want to style up your primary and give it the custom looks, these covers will do just that and make your primary more ergonomic as a bonus!

If you want to give your M-LOK or KeyMod rail a new look or keep your attachment slots protected, rail covers are what you need! The MGP PPG Rail Cover Panel for M-LOK and KeyMod are supplied as a set of 3 covers; one 40mm, one 80mm and one 120mm cover and are designed to attach to both KeyMod and M-LOK slots. Each cover has hex pattern texture on the surface, inspired by Kryptec Typhon camouflage. The texture both looks fantastic and provides excellent gripping qualities, improving the wet weather handling of your primary and making it look more unique.

The covers are constructed from Nylon reinforced polymer and as such are rock solid, with not a hint of flex to be found. The supplied T-nuts are constructed from steel to provide ample strength to keep the covers tightly fitted, even when heavily used. If you want to style up your primary and give it the custom looks, these covers will do just that and make your primary more ergonomic as a bonus!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

A short and stylish foregrip for M-LOK rail systems with a rubberised inlay, which will give you a sturdy and comfortable platform to brace your rifle and improve your stability when shooting.

Looking for rails for your M-LOK handguard but want to minimize added weight? These Amoeba M-LOK rails are perfect for your needs. After all, what is the point of having an ultra-light rail system without ultra-light rails with which to add your tacticool mission essentials? Each of the two included rail sections are 3.5" in length and provide 7 rail slots with which to mount your Picatinny gear. 

Looking for rails for your M-LOK handguard but want to minimize added weight? These Amoeba M-LOK rails are perfect for your needs. After all, what is the point of having an ultra-light rail system without ultra-light rails with which to add your tacticool mission essentials? Each of the two included rail sections are 3.5" in length and provide 7 rail slots with which to mount your Picatinny gear. 

If your M-LOK rails are a bit too cold to hold in winter, or you want a bit more grip to help you manipulate your rifle effectively, we recommend some rail covers! The Armour Rail Cover panels for M-LOK by MGP are constructed from high density polymer, and are easily installed by adding a panel wherever you need it, and once in place, pushing the locking piece in to secure it. The set includes 10 rail panels and 10 locking pieces, allowing you to cover up to a massive 40cm of M-LOK!

If your M-LOK rails are a bit too cold to hold in winter, or you want a bit more grip to help you manipulate your rifle effectively, we recommend some rail covers! The Armour Rail Cover panels for M-LOK by MGP are constructed from high density polymer, and are easily installed by adding a panel wherever you need it, and once in place, pushing the locking piece in to secure it. The set includes 10 rail panels and 10 locking pieces, allowing you to cover up to a massive 40cm of M-LOK!

An Airsoft handstop for M-LOK rail systems, constructed from flexible Polymer and with two sizes of handstop to choose from. 

A Polymer constructed rail adaptor for M-LOK rail slots, which converts to a single 20mm RIS slot for a flashlight or laser.

Rail covers built from lightweight polymer, designed to cover M-LOK rails in order provide a nicer grip to your Airsoft Weapon.

Rail covers built from lightweight polymer, designed to cover M-LOK rails in order provide a nicer grip to your Airsoft Weapon.

MGP brings us a high quality Quick Detach (QD) sling adaptor, allowing you to connect your weapon of choice to a sling. The QD system is locked in place by 4 steel ball bearings which are lowered with a push of the centre button to lock in place and release, again by pressing down the same button.

This version supports 20mm RIS / RAS rail system. Simply loosely screw the fixtures together using the Allen key included, then slide them onto your RIS rail, then tighten to lock the fixture in place and voila! Now you can attach and detach your sling swivel with ease, allowing for a dynamic and efficient playstyle on the battlefield.

No more unslinging your rifle from your back or shoulders!

If you are in the market for a new pistol grip and you are a CQB player, a PDW style grip with a refined angle is the best thing for the job! Introducing the PDW Pistol Grip for M4/AR15 AEG from CYMA, a high density polymer pistol grip with a more vertical angle than standard M4/AR15 grips, making it more suitable for use with modern shooting stances. 

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

If you are looking for a stylish new pistol grip to give your M4/AR15 a fresh look, CYMA have just what you need! The Enhanced Pistol Grip for M4/AR15 AEG is constructed from high density polymer and has a more vertical grip angle than a standard M4/AR15 grip, making it easier to use with the stock collapsed. 

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that.