Airsoft Grips & Stocks

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Skeleton Stock w/Folding Butt Plate is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium with weight reducing cuts throughout, and the folding/mounting mechanism is constructed from steel to provide the prerequisite strength. This stock is ideal for super compact setups with its folding butt plate, and its raised cheekpiece provides superb sight alignment. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing an ultra-compact solution when folded, with full functionality when deployed! Get this on your MPX, it deserves it!

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

If you have a Double Eagle M90x with the Honey Badger PDW stock and you fancy a change, until now you have been SOL! Introducing the Buffer Tube for Double Eagle M4/AR-15, a replacement original part from the M904 AEG. This set includes an alloy buffer tube and castle nut, a steel bolt and spacer and a polymer receiver stock adapter which can be used to convert an M90x series with the Honey Badger stock to a standard AR buffer tube.

Whether you have damaged the stock mounting apparatus on your Double Eagle M90x polymer receiver or you are bored of the Honey Badger look and you want to change things up, this set is the perfect thing!

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

A Polymer constructed Buffer Tube for Fixed Stock AK models, allowing you to install an M4 Stock on the back of your AK. This also offers you Six Positions to set the Stock to, so that you can rapidly change the overall length of the Gun. This is great for storage and transport, but also for when you want to transition to tighter, indoor areas.

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

If you've lost the butt plate from your Delta Armory or Krytac battery stock, this is your lucky day! This Butt Plate is a replacement original part from Delta Armory, compatible with both the Delta Armory and Krytac Battery stocks. The butt plate has texture and a Delta Armory logo on its contact surface, along with textured tabs on each side which lock it into the stock itself and allow easy access to the battery compartment.

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

A replacement ergonomically enhanced stock based on the CTR style design, for Airsoft M4 M16 type AEGs. 

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

If you want a new look for your CYMA AK or you're building the big boy RPK series, Battleaxe has the kit for you! The RPK Wood Conversion Kit for AK-47/74 is designed to fit CYMA AK AEGs but should also fit other brands but may need modification. The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing. 

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option!

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

A futuristic stock for M4 platform Airsoft Electric Guns, which replaces a standard Pistol Grip and Sliding Stock with this Ready Mag System, complete with Sliding Stock function and QD Sling Loops.

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

A Steel constructed replacement Receiver & Folding Stock for the LCT M70AB2 Airsoft Electric Gun, which features a Stamped Steel receiver and Steel Underfolder Stock, complete with Sling Loop.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable.