Airsoft Magazines

A STANAG type magazine which is designed to fit any Airsoft AEG rifle which accepts this style of magazine, such as M4, L85, 416, SCAR-L and more.

This magazine is the perfect purchase for any Airsoft skirmisher due to its low price and high quality, with the added bonus that should you one day visit a low-cap only site it can be quickly changed to suit your needs.

Looking for spare magazines for the VORSK VMP-1? You have found them! These magazines are constructed from alloy with a steel feed spring and brass valves and hold 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 SMG. 

If you're after spare AEP magazines you are in luck! The CYMA 30rnd Magazine is compatible with the CM.030, CM.122, CM.123, CM.126, CM.127 and CM.132 AEP, and should also fit the ASG XP17 Challenger AEP. This magazine is constructed with an alloy shell, polymer follower and steel feed spring, and can be loaded using an Airsoft speed loader through the feed lips at the top of the magazine body. This magazine holds 30 BBs and is a very compact design so it is easy to carry loads!

If you are running the gorgeous Army Armament Sand Viper you will need some equally gorgeous magazines to feed it! The Army Armament 28rnd Magazine for TTI Sand Viper is intended for the Sand Viper, of course, and comes with a CNC machined Aluminium baseplate finished in bronze sporting the Taran Tactical Innovations logo. Being a Hi-capa-based design, this magazine should also fit and feed in most TM-compatible Hi-capa pistols.

The magazine follows the standard GBB pistol mag layout, with the gas fill valve located on the baseplate, requiring both the magazine and your gas can to be inverted to fill. The mag can be loaded through the feed lips or through the feed channel on the front when the follower is pulled down, either by hand or using an Airsoft speed loader. If you want to load up on mags for your Sand Viper but you need the matching baseplates, here you go!

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

If you are sniping you probably don't need that much extra ammo, but there is nothing worse than hiding on the deck fumbling with your speed loader as the enemy close in, trust us! The Double Eagle M52 magazine is constructed from polymer and holds 27 rounds, giving you 27 more chances to get that kill! These magazines are nice and compact, and easy to store inside pistol magazine pouches or a utility pouch. This magazine looks like a VSR design but we have not yet been able to confirm compatibility.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. 

The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.

A spare or replacement magazine for Raven's R9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A magazine for the ASG M4A3 SportsLine 6mm BB Gun and stores up to 27 BBs at a time.

A spare original magazine for the Koer SVD, also compatible with the AGM spring bolt action SVD. This magazine holds 33 rounds and can be filled with a speed loader or loading tool.

You shouldn't need to reload often when sniping, unless you are a bad shot! Regardless of this, it's always wise to have a spare mag on hand for extended skirmishes rather than panic under fire trying to load BBs as the enemies BBs shower down upon you! Introducing CYMA's spare magazine for the CM.702 M24 rifle. This magazine is constructed from polymer and holds 28 rounds. The magazine can be loaded either by hand or with a speed loader. 

If you have ever spotted a vulnerable target, raised your Airsoft sniper rifle and gently squeezed the trigger and had nothing come out, you will understand the need for a way to monitor your ammo levels when sniping on the Airsoft field. Maple Leaf have the answer to our prayers, right here! The Transparent Magazine for the VSR-10 is constructed from a transparent polymer, allowing you to verify that your magazine is fully loaded before putting it into your mag pouch, and also allows you to quickly check how many BBs you have remaining through the clear witness window on the magazine's base. Never shoot blanks again with this mag!

A Spare Gas Blowback Magazine for any generation of the WE F226 range. 

A spare or replacement magazine for Vorsk's VM9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

So, if you have got yourself the Short Magazine Lee Enfield rifle from S&T, you will probably need a few more short magazines to go with it, eh? Introducing the Lee Enfield Rifle No.1 Mk.III S.M.L.E magazine from S&T, an alloy 35 round magazine with a beautiful old-school antique still finish on the outside. This magazine is a spring-loaded design and can be filled either with a speed loader or by hand from the fill port at the front. This magazine is around the length of a 7.62 STANAG magazine and could be carried in 7.62 fabric magazine pouches with a spacer in the bottom for easy access.

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

Looking for a CO2 magazine for your SRC Hi-capa to see it through the winter months? You have found what you need! This 28rnd CO2 Magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

This magazine houses a single unthreaded 12g CO2 capsule which can be loaded through the bottom of the magazine by removing the baseplate. If you want to guarantee your SRC Baba Yaga can hack it when the temperature gets low a CO2 mag is the perfect solution!

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

Lock and load with spare mags for your VSR-10 Airsoft sniper rifle! The magazine holds 30 BBs and can be loaded using a speed loader through the fill/feed port on the top of the mag.

This magazine is well shaped to fit into fabric pistol magazine pouches, and its low weight and compact form mean you can carry plenty without compromising your mobility.

This 54rnd magazine is designed for AR36 platform Airsoft Electric Guns, and comes included with a set of Bullet Stickers to install behind the semi-transparent plastic, to make your replica look as realistic as possible. Not only this, but multiple magazines can be clamped together for lightning-fast reloads and easier magazine management. A Speedloader is required to fill; the magazine will feed until empty, without any annoying rattle sound.

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.